{"title":"Kansai Special Pullers, Rollers \u0026 Drive","description":"\u003cp\u003eKansai Special pullers, rollers, gears, pulleys and other drive parts. Order by the Kansai Special part number.\u003c\/p\u003e\n\u003cp\u003eMore \u003ca href=\"\/collections\/kansai-special-spare-parts\"\u003eKansai Special spare parts\u003c\/a\u003e, or \u003ca href=\"\/collections\/spare-parts\"\u003espare parts from all makers\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"kansai-special-02-4170-0-rear-puller-gear-15-teeth","title":"Kansai Special 02-4170-0 Rear Puller Gear (15 Teeth)","description":"\u003ch2\u003eKansai Special 02-4170-0 Rear Puller Gear (15 Teeth)\u003c\/h2\u003e\n\u003cp\u003eKansai Special spare part 02-4170-0: Rear Puller Gear (15 Teeth). This is the take-off part that helps move the seam on behind the stitch. The Kansai Special parts books for FX list this part.\u003c\/p\u003e\n\u003cp\u003eThe first sign of a tired puller is in the seam: puckering, a stretched or wavy line, or material that wanders off its path. The cause is often a glazed roller, worn teeth or a gear with play.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKansai Special part number: \u003cstrong\u003e02-4170-0\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name: Rear Puller Gear (15 Teeth)\u003c\/li\u003e\n\u003cli\u003eShort form of the number: 02-417\u003c\/li\u003e\n\u003cli\u003eType: Pullers, Rollers \u0026amp; Drive\u003c\/li\u003e\n\u003cli\u003eKansai Special parts books that list this part: FX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMarks on the fabric where the rollers press it\u003c\/li\u003e\n\u003cli\u003eThe material slips or is pulled unevenly\u003c\/li\u003e\n\u003cli\u003eTeeth of a gear or roller are chipped, rounded or worn\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRemove thread and lint wound around the shaft before you fit the new part, and keep oil off the rubber, which reduces the grip. Make sure the machine is switched off and unplugged before you take anything apart.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003ePullers and puller gears differ by machine, tooth count and pitch. A number such as 15 teeth or 22 pitch in the name is part of the specification, so compare it with the old one.\u003c\/p\u003e\n\u003ch3\u003eMore Kansai Special parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-05-3760-0-leaf-spring-upper\"\u003eKansai Special 05-3760-0 Leaf Spring (Upper)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-87-1000-0-bolt\"\u003eKansai Special 87-1000-0 Bolt\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-05-3770-0-leaf-spring-lower\"\u003eKansai Special 05-3770-0 Leaf Spring (Lower)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-19-4160-0-needle-guard\"\u003eKansai Special 19-4160-0 Needle Guard\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMore in this group: \u003ca href=\"\/collections\/kansai-special-pullers-rollers-and-drive\"\u003eKansai Special pullers, rollers \u0026amp; drive\u003c\/a\u003e. Everything from this maker: \u003ca href=\"\/collections\/kansai-special-spare-parts\"\u003eall Kansai Special spare parts\u003c\/a\u003e.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":51105710735525,"sku":"KAN-02-417","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/kp_roller_v2.png?v=1793912219"},{"product_id":"kansai-special-01-1150-0-sleeve","title":"Kansai Special 01-1150-0 Sleeve","description":"\u003ch2\u003eKansai Special 01-1150-0 Sleeve\u003c\/h2\u003e\n\u003cp\u003eThe Kansai Special 01-1150-0 is listed as a sleeve. It is the part that sets the running fit between a moving shaft and its seat. The same part number is used across many Kansai Special machine families, for example FX, DFB and NW\/NL.\u003c\/p\u003e\n\u003cp\u003eBushings and sleeves are the parts meant to wear, so that the shaft they carry and the frame around them do not. A worn one is replaced rather than repaired.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKansai Special part number: \u003cstrong\u003e01-1150-0\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name: Sleeve\u003c\/li\u003e\n\u003cli\u003eShort form of the number: 01-115\u003c\/li\u003e\n\u003cli\u003eType: Pullers, Rollers \u0026amp; Drive\u003c\/li\u003e\n\u003cli\u003eKansai Special parts books that list this part: FX, DFB, NW\/NL and 10 more\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVisible wear or scoring on the part or on the shaft it carries\u003c\/li\u003e\n\u003cli\u003eTiming that drifts or cannot be set\u003c\/li\u003e\n\u003cli\u003ePlay, noise or heat at the joint\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePush it in straight and with even pressure, never by hammering on one edge. If it has an oil hole or groove, line it up with the oil feed.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eBore, outer diameter and length decide the fit. A flange, an oil groove or an oil hole must sit on the new part in the same place as on the old one. Compare the part with your old one or with your machine's parts list, because one number can serve several related models.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the shaft need to be replaced too?\u003c\/strong\u003e\u003cbr\u003eNot always. If the shaft is smooth and only this part is worn, replacing the part is enough. A shaft with grooves, ridges or a polished worn band should be replaced too, or the new part wears out quickly.\u003c\/p\u003e\n\u003cp\u003eSame group: \u003ca href=\"\/collections\/kansai-special-pullers-rollers-and-drive\"\u003ePullers, Rollers \u0026amp; Drive\u003c\/a\u003e. Same maker: \u003ca href=\"\/collections\/kansai-special-spare-parts\"\u003eall Kansai Special spare parts\u003c\/a\u003e.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":51105710768293,"sku":"KAN-01-115","price":13.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/kp_bushing_v2.png?v=1793912220"},{"product_id":"kansai-special-02-4200-0-rear-puller-gear-smooth","title":"Kansai Special 02-4200-0 Rear Puller Gear (Smooth)","description":"\u003ch2\u003eKansai Special 02-4200-0 Rear Puller Gear (Smooth)\u003c\/h2\u003e\n\u003cp\u003eKansai Special spare part 02-4200-0: Rear Puller Gear (Smooth). This is a puller, roller or related part of the fabric take-off. The Kansai Special parts books for FX list this part.\u003c\/p\u003e\n\u003cp\u003eRollers collect lint, thread ends and sticky residue, and the gears that drive them wear at the teeth. Cleaning these parts at service shows which ones are really worn and which only need cleaning.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKansai Special part number: \u003cstrong\u003e02-4200-0\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name: Rear Puller Gear (Smooth)\u003c\/li\u003e\n\u003cli\u003eShort form of the number: 02-420\u003c\/li\u003e\n\u003cli\u003eType: Pullers, Rollers \u0026amp; Drive\u003c\/li\u003e\n\u003cli\u003eKansai Special parts books that list this part: FX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003ePullers and puller gears differ by machine, tooth count and pitch. A number such as 15 teeth or 22 pitch in the name is part of the specification, so compare it with the old one. The part number is the safest check: the same number can be used on more than one model.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe material slips or is pulled unevenly\u003c\/li\u003e\n\u003cli\u003eA roller or gear wobbles or has play on its shaft\u003c\/li\u003e\n\u003cli\u003eTeeth of a gear or roller are chipped, rounded or worn\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAfter installing, set the puller pressure and speed as described in the manual for your machine.\u003c\/p\u003e\n\u003ch3\u003eMore Kansai Special parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-05-3760-0-leaf-spring-upper\"\u003eKansai Special 05-3760-0 Leaf Spring (Upper)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-87-1000-0-bolt\"\u003eKansai Special 87-1000-0 Bolt\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-05-3770-0-leaf-spring-lower\"\u003eKansai Special 05-3770-0 Leaf Spring (Lower)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-19-4160-0-needle-guard\"\u003eKansai Special 19-4160-0 Needle Guard\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eShould the matching roller or gear be replaced with it?\u003c\/strong\u003e\u003cbr\u003eCheck the partner first. A puller works as a pair of rollers or gears, and a new part against a worn or glazed partner can still slip. Replace both when the partner shows wear, otherwise one is enough.\u003c\/p\u003e\n\u003cp\u003eSame group: \u003ca href=\"\/collections\/kansai-special-pullers-rollers-and-drive\"\u003ePullers, Rollers \u0026amp; Drive\u003c\/a\u003e. Same maker: \u003ca href=\"\/collections\/kansai-special-spare-parts\"\u003eall Kansai Special spare parts\u003c\/a\u003e.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":51105711095973,"sku":"KAN-02-420","price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/kp_roller_v2.png?v=1793912219"},{"product_id":"kansai-special-02-1240-0-housing","title":"Kansai Special 02-1240-0 Housing","description":"\u003ch2\u003eKansai Special 02-1240-0 Housing\u003c\/h2\u003e\n\u003cp\u003ePart 02-1240-0 in the Kansai Special parts list is a housing. It is the part that sets the running fit between a moving shaft and its seat. The same part number is used across many Kansai Special machine families, for example FX, DFB and NR.\u003c\/p\u003e\n\u003cp\u003eBushings, bearings and housings carry shafts, bars and levers and keep them running true. Wear shows as play, noise and loss of timing, and it grows the longer the part stays in use.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKansai Special part number: \u003cstrong\u003e02-1240-0\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name: Housing\u003c\/li\u003e\n\u003cli\u003eShort form of the number: 02-124\u003c\/li\u003e\n\u003cli\u003eType: Pullers, Rollers \u0026amp; Drive\u003c\/li\u003e\n\u003cli\u003eKansai Special parts books that list this part: FX, DFB, NR, RX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe bore is worn oval, or the part spins in its seat\u003c\/li\u003e\n\u003cli\u003ePlay, noise or heat at the joint\u003c\/li\u003e\n\u003cli\u003eVisible wear or scoring on the part or on the shaft it carries\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInstall it clean and lubricate it only as the manual for your machine instructs.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eNames such as Bushing, Sleeve or Bearing cover many sizes and shapes. The part number tells which one you need. The part number is the safest check: the same number can be used on more than one model.\u003c\/p\u003e\n\u003ch3\u003eMore Kansai Special parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-02-1170-0-plate\"\u003eKansai Special 02-1170-0 Plate\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-02-1380-0-rear-puller\"\u003eKansai Special 02-1380-0 Rear Puller\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-02-4170-0-rear-puller-gear-15-teeth\"\u003eKansai Special 02-4170-0 Rear Puller Gear (15 Teeth)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMore in this group: \u003ca href=\"\/collections\/kansai-special-pullers-rollers-and-drive\"\u003eKansai Special pullers, rollers \u0026amp; drive\u003c\/a\u003e. Everything from this maker: \u003ca href=\"\/collections\/kansai-special-spare-parts\"\u003eall Kansai Special spare parts\u003c\/a\u003e.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":51105711161509,"sku":"KAN-02-124","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/kp_bushing_v2.png?v=1793912220"},{"product_id":"kansai-special-02-4670-0-rear-puller-smooth","title":"Kansai Special 02-4670-0 Rear Puller (Smooth)","description":"\u003ch2\u003eKansai Special 02-4670-0 Rear Puller (Smooth)\u003c\/h2\u003e\n\u003cp\u003eRear Puller (Smooth), Kansai Special part number 02-4670-0. This is a puller, roller or related part of the fabric take-off. The Kansai Special parts books for FX list this part.\u003c\/p\u003e\n\u003cp\u003eRollers collect lint, thread ends and sticky residue, and the gears that drive them wear at the teeth. Cleaning these parts at service shows which ones are really worn and which only need cleaning.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKansai Special part number: \u003cstrong\u003e02-4670-0\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name: Rear Puller (Smooth)\u003c\/li\u003e\n\u003cli\u003eShort form of the number: 02-467\u003c\/li\u003e\n\u003cli\u003eType: Pullers, Rollers \u0026amp; Drive\u003c\/li\u003e\n\u003cli\u003eKansai Special parts books that list this part: FX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClicking or knocking from the puller drive\u003c\/li\u003e\n\u003cli\u003eA roller or gear wobbles or has play on its shaft\u003c\/li\u003e\n\u003cli\u003eTeeth of a gear or roller are chipped, rounded or worn\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhere the part is a roller, fit it so that the upper and lower surfaces meet evenly across their width. Then draw a scrap of the fabric you sew through the puller and check that it travels straight.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003ePullers and puller gears differ by machine, tooth count and pitch. A number such as 15 teeth or 22 pitch in the name is part of the specification, so compare it with the old one. The part number is the safest check: the same number can be used on more than one model.\u003c\/p\u003e\n\u003ch3\u003eMore Kansai Special parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-05-3760-0-leaf-spring-upper\"\u003eKansai Special 05-3760-0 Leaf Spring (Upper)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-87-1000-0-bolt\"\u003eKansai Special 87-1000-0 Bolt\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-05-3770-0-leaf-spring-lower\"\u003eKansai Special 05-3770-0 Leaf Spring (Lower)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-19-4160-0-needle-guard\"\u003eKansai Special 19-4160-0 Needle Guard\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eShould the matching roller or gear be replaced with it?\u003c\/strong\u003e\u003cbr\u003eCheck the partner first. A puller works as a pair of rollers or gears, and a new part against a worn or glazed partner can still slip. Replace both when the partner shows wear, otherwise one is enough.\u003c\/p\u003e\n\u003cp\u003eMore in this group: \u003ca href=\"\/collections\/kansai-special-pullers-rollers-and-drive\"\u003eKansai Special pullers, rollers \u0026amp; drive\u003c\/a\u003e. Everything from this maker: \u003ca href=\"\/collections\/kansai-special-spare-parts\"\u003eall Kansai Special spare parts\u003c\/a\u003e.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":51105711194277,"sku":"KAN-02-467","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/kp_roller_v2.png?v=1793912219"},{"product_id":"kansai-special-02-4940-0-rear-puller","title":"Kansai Special 02-4940-0 Rear Puller","description":"\u003ch2\u003eKansai Special 02-4940-0 Rear Puller\u003c\/h2\u003e\n\u003cp\u003eKansai Special spare part 02-4940-0: Rear Puller. This is a roller, gear or lever of the unit that draws the sewn material away from the needles. Kansai Special shows it in the parts books for FX and DFB.\u003c\/p\u003e\n\u003cp\u003eA puller has to move the seam at the pace it is set for, so the material is neither stretched nor bunched up behind the needles. A roller that has lost its grip upsets that balance, even when every setting is correct.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKansai Special part number: \u003cstrong\u003e02-4940-0\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name: Rear Puller\u003c\/li\u003e\n\u003cli\u003eShort form of the number: 02-494\u003c\/li\u003e\n\u003cli\u003eType: Pullers, Rollers \u0026amp; Drive\u003c\/li\u003e\n\u003cli\u003eKansai Special parts books that list this part: FX, DFB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eUpper and lower, smooth and toothed: these words in the name are real differences. A smooth roller usually does not grip like a toothed one. One Kansai Special number can serve several related models, so compare the part with the old one.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTeeth of a gear or roller are chipped, rounded or worn\u003c\/li\u003e\n\u003cli\u003eClicking or knocking from the puller drive\u003c\/li\u003e\n\u003cli\u003eRubber surface that has gone hard, glazed, cracked or worn smooth\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eClean the shaft and the seat before fitting. Turn the handwheel by hand and check that the puller drive runs freely, and that any gear meshes fully with its partner.\u003c\/p\u003e\n\u003ch3\u003eMore Kansai Special parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-05-3760-0-leaf-spring-upper\"\u003eKansai Special 05-3760-0 Leaf Spring (Upper)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-87-1000-0-bolt\"\u003eKansai Special 87-1000-0 Bolt\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-05-3770-0-leaf-spring-lower\"\u003eKansai Special 05-3770-0 Leaf Spring (Lower)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-19-4160-0-needle-guard\"\u003eKansai Special 19-4160-0 Needle Guard\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBrowse \u003ca href=\"\/collections\/kansai-special-pullers-rollers-and-drive\"\u003eKansai Special pullers, rollers \u0026amp; drive\u003c\/a\u003e, or see \u003ca href=\"\/collections\/kansai-special-spare-parts\"\u003eKansai Special spare parts\u003c\/a\u003e.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":51105711227045,"sku":"KAN-02-494","price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/kp_roller_v2.png?v=1793912219"},{"product_id":"kansai-special-02-1380-0-rear-puller","title":"Kansai Special 02-1380-0 Rear Puller","description":"\u003ch2\u003eKansai Special 02-1380-0 Rear Puller\u003c\/h2\u003e\n\u003cp\u003eKansai Special 02-1380-0 is a rear puller, the take-off part that helps move the seam on behind the stitch. Kansai Special lists this part in the books of many machine families, among them FX, DFB and NR.\u003c\/p\u003e\n\u003cp\u003eThe take-off rollers move the material through the machine after the stitch. When the rubber hardens or the teeth wear, the fabric slips and the seam comes out uneven.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKansai Special part number: \u003cstrong\u003e02-1380-0\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name: Rear Puller\u003c\/li\u003e\n\u003cli\u003eShort form of the number: 02-138\u003c\/li\u003e\n\u003cli\u003eType: Pullers, Rollers \u0026amp; Drive\u003c\/li\u003e\n\u003cli\u003eKansai Special parts books that list this part: FX, DFB, NR, RX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTeeth of a gear or roller are chipped, rounded or worn\u003c\/li\u003e\n\u003cli\u003eClicking or knocking from the puller drive\u003c\/li\u003e\n\u003cli\u003eRubber surface that has gone hard, glazed, cracked or worn smooth\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAfter installing, set the puller pressure and speed as described in the manual for your machine.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003ePullers and puller gears differ by machine, tooth count and pitch. A number such as 15 teeth or 22 pitch in the name is part of the specification, so compare it with the old one. The part number is the safest check: the same number can be used on more than one model.\u003c\/p\u003e\n\u003ch3\u003eMore Kansai Special parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-02-1240-0-housing\"\u003eKansai Special 02-1240-0 Housing\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-02-1170-0-plate\"\u003eKansai Special 02-1170-0 Plate\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-02-4170-0-rear-puller-gear-15-teeth\"\u003eKansai Special 02-4170-0 Rear Puller Gear (15 Teeth)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-02-4200-0-rear-puller-gear-smooth\"\u003eKansai Special 02-4200-0 Rear Puller Gear (Smooth)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRelated: \u003ca href=\"\/collections\/kansai-special-pullers-rollers-and-drive\"\u003ePullers, Rollers \u0026amp; Drive\u003c\/a\u003e | \u003ca href=\"\/collections\/kansai-special-spare-parts\"\u003eKansai Special spare parts\u003c\/a\u003e.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":51105711259813,"sku":"KAN-02-138","price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/kp_roller_v2.png?v=1793912219"},{"product_id":"kansai-special-02-4960-0-rear-puller","title":"Kansai Special 02-4960-0 Rear Puller","description":"\u003ch2\u003eKansai Special 02-4960-0 Rear Puller\u003c\/h2\u003e\n\u003cp\u003eKansai Special 02-4960-0 is a rear puller, one of the rollers or drive parts that keep the seam moving at a steady pace. Kansai Special shows it in the parts books for FX.\u003c\/p\u003e\n\u003cp\u003eThe first sign of a tired puller is in the seam: puckering, a stretched or wavy line, or material that wanders off its path. The cause is often a glazed roller, worn teeth or a gear with play.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKansai Special part number: \u003cstrong\u003e02-4960-0\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name: Rear Puller\u003c\/li\u003e\n\u003cli\u003eShort form of the number: 02-496\u003c\/li\u003e\n\u003cli\u003eType: Pullers, Rollers \u0026amp; Drive\u003c\/li\u003e\n\u003cli\u003eKansai Special parts books that list this part: FX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA roller or gear wobbles or has play on its shaft\u003c\/li\u003e\n\u003cli\u003eRubber surface that has gone hard, glazed, cracked or worn smooth\u003c\/li\u003e\n\u003cli\u003eTeeth of a gear or roller are chipped, rounded or worn\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhere the part is a roller, fit it so that the upper and lower surfaces meet evenly across their width. Then draw a scrap of the fabric you sew through the puller and check that it travels straight.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003ePullers come as a roller alone, as a gear alone or as a complete unit. Check what the name says against what you need to replace. One Kansai Special number can serve several related models, so compare the part with the old one.\u003c\/p\u003e\n\u003ch3\u003eMore Kansai Special parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-02-4940-0-rear-puller\"\u003eKansai Special 02-4940-0 Rear Puller\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-05-3760-0-leaf-spring-upper\"\u003eKansai Special 05-3760-0 Leaf Spring (Upper)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-87-1000-0-bolt\"\u003eKansai Special 87-1000-0 Bolt\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-05-3770-0-leaf-spring-lower\"\u003eKansai Special 05-3770-0 Leaf Spring (Lower)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBrowse \u003ca href=\"\/collections\/kansai-special-pullers-rollers-and-drive\"\u003eKansai Special pullers, rollers \u0026amp; drive\u003c\/a\u003e, or see \u003ca href=\"\/collections\/kansai-special-spare-parts\"\u003eKansai Special spare parts\u003c\/a\u003e.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":51105711325349,"sku":"KAN-02-496","price":70.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/kp_roller_v2.png?v=1793912219"},{"product_id":"kansai-special-02-4730-0-rear-puller-upper-22-pitch","title":"Kansai Special 02-4730-0 Rear Puller, Upper, 22 Pitch","description":"\u003ch2\u003eKansai Special 02-4730-0 Rear Puller, Upper, 22 Pitch\u003c\/h2\u003e\n\u003cp\u003eKansai Special spare part 02-4730-0: Rear Puller, Upper, 22 Pitch. This is the take-off part that helps move the seam on behind the stitch.\u003c\/p\u003e\n\u003cp\u003eThe take-off rollers move the material through the machine after the stitch. When the rubber hardens or the teeth wear, the fabric slips and the seam comes out uneven.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKansai Special part number: \u003cstrong\u003e02-4730-0\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name: Rear Puller, Upper, 22 Pitch\u003c\/li\u003e\n\u003cli\u003eShort form of the number: 02-473\u003c\/li\u003e\n\u003cli\u003eType: Pullers, Rollers \u0026amp; Drive\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003ePullers and puller gears differ by machine, tooth count and pitch. A number such as 15 teeth or 22 pitch in the name is part of the specification, so compare it with the old one. One Kansai Special number can serve several related models, so compare the part with the old one.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMarks on the fabric where the rollers press it\u003c\/li\u003e\n\u003cli\u003eClicking or knocking from the puller drive\u003c\/li\u003e\n\u003cli\u003eA pivot or connecting lever of the drive is loose or worn\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAfter installing, set the puller pressure and speed as described in the manual for your machine.\u003c\/p\u003e\n\u003ch3\u003eRelated Kansai Special parts\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-02-4670-0-rear-puller-smooth\"\u003eKansai Special 02-4670-0 Rear Puller (Smooth)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-02-4940-0-rear-puller\"\u003eKansai Special 02-4940-0 Rear Puller\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-02-1240-0-housing\"\u003eKansai Special 02-1240-0 Housing\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-02-1170-0-plate\"\u003eKansai Special 02-1170-0 Plate\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eShould the matching roller or gear be replaced with it?\u003c\/strong\u003e\u003cbr\u003eCheck the partner first. A puller works as a pair of rollers or gears, and a new part against a worn or glazed partner can still slip. Replace both when the partner shows wear, otherwise one is enough.\u003c\/p\u003e\n\u003cp\u003eRelated: \u003ca href=\"\/collections\/kansai-special-pullers-rollers-and-drive\"\u003ePullers, Rollers \u0026amp; Drive\u003c\/a\u003e | \u003ca href=\"\/collections\/kansai-special-spare-parts\"\u003eKansai Special spare parts\u003c\/a\u003e.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":51105711489189,"sku":"KAN-02-473","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/kp_roller_v2.png?v=1793912219"},{"product_id":"kansai-special-09-5240-0-rear-roller","title":"Kansai Special 09-5240-0 Rear Roller","description":"\u003ch2\u003eKansai Special 09-5240-0 Rear Roller\u003c\/h2\u003e\n\u003cp\u003eRear Roller, Kansai Special part number 09-5240-0. This is a puller, roller or related part of the fabric take-off. Kansai Special lists this part in the books of many machine families, among them FX, NR and RX.\u003c\/p\u003e\n\u003cp\u003eThe take-off rollers move the material through the machine after the stitch. When the rubber hardens or the teeth wear, the fabric slips and the seam comes out uneven.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKansai Special part number: \u003cstrong\u003e09-5240-0\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name: Rear Roller\u003c\/li\u003e\n\u003cli\u003eShort form of the number: 09-524\u003c\/li\u003e\n\u003cli\u003eType: Pullers, Rollers \u0026amp; Drive\u003c\/li\u003e\n\u003cli\u003eKansai Special parts books that list this part: FX, NR, RX, NRE\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTeeth of a gear or roller are chipped, rounded or worn\u003c\/li\u003e\n\u003cli\u003eThe material slips or is pulled unevenly\u003c\/li\u003e\n\u003cli\u003eA roller or gear wobbles or has play on its shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAfter installing, set the puller pressure and speed as described in the manual for your machine.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eUpper and lower, smooth and toothed: these words in the name are real differences. A smooth roller usually does not grip like a toothed one.\u003c\/p\u003e\n\u003ch3\u003eMore Kansai Special parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-09-5230-0-shaft\"\u003eKansai Special 09-5230-0 Shaft\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-09-5220-0-screw\"\u003eKansai Special 09-5220-0 Screw\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-09-5210-0-bracket\"\u003eKansai Special 09-5210-0 Bracket\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-09-5530-0-handle\"\u003eKansai Special 09-5530-0 Handle\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRelated: \u003ca href=\"\/collections\/kansai-special-pullers-rollers-and-drive\"\u003ePullers, Rollers \u0026amp; Drive\u003c\/a\u003e | \u003ca href=\"\/collections\/kansai-special-spare-parts\"\u003eKansai Special spare parts\u003c\/a\u003e.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":51105712373925,"sku":"KAN-09-524","price":42.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/kp_roller_v2.png?v=1793912219"},{"product_id":"kansai-special-26-4620-0-space-bushing","title":"Kansai Special 26-4620-0 Space Bushing","description":"\u003ch2\u003eKansai Special 26-4620-0 Space Bushing\u003c\/h2\u003e\n\u003cp\u003eSpace Bushing, Kansai Special part number 26-4620-0. This is the part that sets the running fit between a moving shaft and its seat. The same part number is used across many Kansai Special machine families, for example FX, DFB and DLR.\u003c\/p\u003e\n\u003cp\u003eBushings and sleeves are the parts meant to wear, so that the shaft they carry and the frame around them do not. A worn one is replaced rather than repaired.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKansai Special part number: \u003cstrong\u003e26-4620-0\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name: Space Bushing\u003c\/li\u003e\n\u003cli\u003eShort form of the number: 26-462\u003c\/li\u003e\n\u003cli\u003eType: Pullers, Rollers \u0026amp; Drive\u003c\/li\u003e\n\u003cli\u003eKansai Special parts books that list this part: FX, DFB, DLR, FBX, WFB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eBushings can come in upper and lower, or left and right versions that look alike. When the name carries a position, choose the same position. The part number is the safest check: the same number can be used on more than one model.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDark oil with fine metal dust around the part\u003c\/li\u003e\n\u003cli\u003eVisible wear or scoring on the part or on the shaft it carries\u003c\/li\u003e\n\u003cli\u003eStiff or rough movement when the shaft is turned by hand\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePush it in straight and with even pressure, never by hammering on one edge. If it has an oil hole or groove, line it up with the oil feed.\u003c\/p\u003e\n\u003ch3\u003eMore Kansai Special parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-26-4610-0-shaft\"\u003eKansai Special 26-4610-0 Shaft\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-26-4630-0-bracket\"\u003eKansai Special 26-4630-0 Bracket\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-26-4600-0-bracket\"\u003eKansai Special 26-4600-0 Bracket\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-26-6370-0-lap-former\"\u003eKansai Special 26-6370-0 Lap Former\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the shaft need to be replaced too?\u003c\/strong\u003e\u003cbr\u003eNot always. If the shaft is smooth and only this part is worn, replacing the part is enough. A shaft with grooves, ridges or a polished worn band should be replaced too, or the new part wears out quickly.\u003c\/p\u003e\n\u003cp\u003eMore in this group: \u003ca href=\"\/collections\/kansai-special-pullers-rollers-and-drive\"\u003eKansai Special pullers, rollers \u0026amp; drive\u003c\/a\u003e. Everything from this maker: \u003ca href=\"\/collections\/kansai-special-spare-parts\"\u003eall Kansai Special spare parts\u003c\/a\u003e.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":51105715224741,"sku":"KAN-26-462","price":6.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/kp_bushing_v2.png?v=1793912220"},{"product_id":"kansai-special-67-1800-0-puller-connecting-lever","title":"Kansai Special 67-1800-0 Puller Connecting Lever","description":"\u003ch2\u003eKansai Special 67-1800-0 Puller Connecting Lever\u003c\/h2\u003e\n\u003cp\u003ePart 67-1800-0 in the Kansai Special parts list is a puller connecting lever. It is a puller, roller or related part of the fabric take-off. Kansai Special shows it in the parts books for DFB, DLR and DVK\/BK.\u003c\/p\u003e\n\u003cp\u003eA puller has to move the seam at the pace it is set for, so the material is neither stretched nor bunched up behind the needles. A roller that has lost its grip upsets that balance, even when every setting is correct.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKansai Special part number: \u003cstrong\u003e67-1800-0\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name: Puller Connecting Lever\u003c\/li\u003e\n\u003cli\u003eShort form of the number: 67-180\u003c\/li\u003e\n\u003cli\u003eType: Pullers, Rollers \u0026amp; Drive\u003c\/li\u003e\n\u003cli\u003eKansai Special parts books that list this part: DFB, DLR, DVK\/BK\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe material slips or is pulled unevenly\u003c\/li\u003e\n\u003cli\u003eA roller or gear wobbles or has play on its shaft\u003c\/li\u003e\n\u003cli\u003eTeeth of a gear or roller are chipped, rounded or worn\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhere the part is a roller, fit it so that the upper and lower surfaces meet evenly across their width. Then draw a scrap of the fabric you sew through the puller and check that it travels straight.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eUpper and lower, smooth and toothed: these words in the name are real differences. A smooth roller usually does not grip like a toothed one. One Kansai Special number can serve several related models, so compare the part with the old one.\u003c\/p\u003e\n\u003ch3\u003eMore Kansai Special parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-27-0440-0-side-cover\"\u003eKansai Special 27-0440-0 Side Cover\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-19-4370-0-retainer-looper-for-dfb\"\u003eKansai Special 19-4370-0 Retainer Looper for DFB\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-45-4320-0-thread-eyelet\"\u003eKansai Special 45-4320-0 Thread Eyelet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-19-4050-0-needle-guide\"\u003eKansai Special 19-4050-0 Needle Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eShould the matching roller or gear be replaced with it?\u003c\/strong\u003e\u003cbr\u003eCheck the partner first. A puller works as a pair of rollers or gears, and a new part against a worn or glazed partner can still slip. Replace both when the partner shows wear, otherwise one is enough.\u003c\/p\u003e\n\u003cp\u003eMore in this group: \u003ca href=\"\/collections\/kansai-special-pullers-rollers-and-drive\"\u003eKansai Special pullers, rollers \u0026amp; drive\u003c\/a\u003e. Everything from this maker: \u003ca href=\"\/collections\/kansai-special-spare-parts\"\u003eall Kansai Special spare parts\u003c\/a\u003e.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":51105715945637,"sku":"KAN-67-1800-0","price":14.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/kp_roller_v2.png?v=1793912219"},{"product_id":"kansai-special-81-1810-0-bushing","title":"Kansai Special 81-1810-0 Bushing","description":"\u003ch2\u003eKansai Special 81-1810-0 Bushing\u003c\/h2\u003e\n\u003cp\u003ePart 81-1810-0 in the Kansai Special parts list is a bushing. It is the part that sets the running fit between a moving shaft and its seat. Kansai Special lists this part in the books of many machine families, among them DFB, BX and DLR.\u003c\/p\u003e\n\u003cp\u003eBushings and sleeves are the parts meant to wear, so that the shaft they carry and the frame around them do not. A worn one is replaced rather than repaired.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKansai Special part number: \u003cstrong\u003e81-1810-0\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name: Bushing\u003c\/li\u003e\n\u003cli\u003eShort form of the number: 81-181\u003c\/li\u003e\n\u003cli\u003eType: Pullers, Rollers \u0026amp; Drive\u003c\/li\u003e\n\u003cli\u003eKansai Special parts books that list this part: DFB, BX, DLR, NB, HDX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eBushings can come in upper and lower, or left and right versions that look alike. When the name carries a position, choose the same position.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe bore is worn oval, or the part spins in its seat\u003c\/li\u003e\n\u003cli\u003ePlay, noise or heat at the joint\u003c\/li\u003e\n\u003cli\u003eTiming that drifts or cannot be set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInstall it clean and lubricate it only as the manual for your machine instructs.\u003c\/p\u003e\n\u003ch3\u003eMore Kansai Special parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-81-1800-0-bushing\"\u003eKansai Special 81-1800-0 Bushing\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-81-1820-0-bushing\"\u003eKansai Special 81-1820-0 Bushing\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the shaft need to be replaced too?\u003c\/strong\u003e\u003cbr\u003eNot always. If the shaft is smooth and only this part is worn, replacing the part is enough. A shaft with grooves, ridges or a polished worn band should be replaced too, or the new part wears out quickly.\u003c\/p\u003e\n\u003cp\u003eBrowse \u003ca href=\"\/collections\/kansai-special-pullers-rollers-and-drive\"\u003eKansai Special pullers, rollers \u0026amp; drive\u003c\/a\u003e, or see \u003ca href=\"\/collections\/kansai-special-spare-parts\"\u003eKansai Special spare parts\u003c\/a\u003e.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":51105716830373,"sku":"KAN-81-181","price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/kp_bushing_v2.png?v=1793912220"},{"product_id":"kansai-special-75-2470-0-roller","title":"Kansai Special 75-2470-0 Roller","description":"\u003ch2\u003eKansai Special 75-2470-0 Roller\u003c\/h2\u003e\n\u003cp\u003eRoller, Kansai Special part number 75-2470-0. This is the take-off part that helps move the seam on behind the stitch. Kansai Special lists this part in the books of many machine families, among them FX, DFB and NW\/NL.\u003c\/p\u003e\n\u003cp\u003eA puller has to move the seam at the pace it is set for, so the material is neither stretched nor bunched up behind the needles. A roller that has lost its grip upsets that balance, even when every setting is correct.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKansai Special part number: \u003cstrong\u003e75-2470-0\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name: Roller\u003c\/li\u003e\n\u003cli\u003eShort form of the number: 75-247\u003c\/li\u003e\n\u003cli\u003eType: Pullers, Rollers \u0026amp; Drive\u003c\/li\u003e\n\u003cli\u003eKansai Special parts books that list this part: FX, DFB, NW\/NL and 12 more\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe material slips or is pulled unevenly\u003c\/li\u003e\n\u003cli\u003eClicking or knocking from the puller drive\u003c\/li\u003e\n\u003cli\u003eRubber surface that has gone hard, glazed, cracked or worn smooth\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eClean the shaft and the seat before fitting. Turn the handwheel by hand and check that the puller drive runs freely, and that any gear meshes fully with its partner.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003ePullers come as a roller alone, as a gear alone or as a complete unit. Check what the name says against what you need to replace.\u003c\/p\u003e\n\u003ch3\u003eMore Kansai Special parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-75-4070-0-washer\"\u003eKansai Special 75-4070-0 Washer\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-75-4510-0-washer\"\u003eKansai Special 75-4510-0 Washer\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBrowse \u003ca href=\"\/collections\/kansai-special-pullers-rollers-and-drive\"\u003eKansai Special pullers, rollers \u0026amp; drive\u003c\/a\u003e, or see \u003ca href=\"\/collections\/kansai-special-spare-parts\"\u003eKansai Special spare parts\u003c\/a\u003e.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":51105717059749,"sku":"KAN-75-247","price":4.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/kp_roller_v2.png?v=1793912219"},{"product_id":"kansai-special-60-0004-0-eccentric-link-assembly","title":"Kansai Special 60-0004-0 Eccentric Link Assembly","description":"\u003ch2\u003eKansai Special 60-0004-0 Eccentric Link Assembly\u003c\/h2\u003e\n\u003cp\u003eKansai Special 60-0004-0 is an eccentric link assembly, a drive part of the machine such as a gear, pulley, eccentric or worm. Kansai Special lists this part in the books of many machine families, among them DFB, BX and DLR.\u003c\/p\u003e\n\u003cp\u003eDrive parts work in pairs: a worm with its wheel, a pulley with its belt, an eccentric with its link. Each wears together with its partner, so the condition of the partner decides how well a new part runs.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKansai Special part number: \u003cstrong\u003e60-0004-0\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name: Eccentric Link Assembly\u003c\/li\u003e\n\u003cli\u003eType: Pullers, Rollers \u0026amp; Drive\u003c\/li\u003e\n\u003cli\u003eKansai Special parts books that list this part: DFB, BX, DLR, DVK\/BK\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eDrive parts differ by machine, size and tooth count. For a gear or pulley, compare the bore and the number of teeth or grooves with the old part. Compare the part with your old one or with your machine's parts list, because one number can serve several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTiming that drifts or cannot be set\u003c\/li\u003e\n\u003cli\u003eTeeth, grooves or running surfaces are chipped, pitted or worn\u003c\/li\u003e\n\u003cli\u003eNoise, vibration or heat from the drive\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eClean the shaft and the bore before fitting. Where the part is held by a key, a flat or a set screw, seat it fully and tighten it so that it cannot turn on the shaft.\u003c\/p\u003e\n\u003cp\u003eBrowse \u003ca href=\"\/collections\/kansai-special-pullers-rollers-and-drive\"\u003eKansai Special pullers, rollers \u0026amp; drive\u003c\/a\u003e, or see \u003ca href=\"\/collections\/kansai-special-spare-parts\"\u003eKansai Special spare parts\u003c\/a\u003e.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":51105717125285,"sku":"KAN-60-0004-0","price":47.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/kp_generic_v2.png?v=1793912220"},{"product_id":"kansai-special-69-4600-0-pulley","title":"Kansai Special 69-4600-0 Pulley","description":"\u003ch2\u003eKansai Special 69-4600-0 Pulley\u003c\/h2\u003e\n\u003cp\u003eThe Kansai Special 69-4600-0 is listed as a pulley. It is a drive part of the machine such as a gear, pulley, eccentric or worm. Kansai Special shows it in the parts books for DFB and PX.\u003c\/p\u003e\n\u003cp\u003eDrive parts work in pairs: a worm with its wheel, a pulley with its belt, an eccentric with its link. Each wears together with its partner, so the condition of the partner decides how well a new part runs.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKansai Special part number: \u003cstrong\u003e69-4600-0\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name: Pulley\u003c\/li\u003e\n\u003cli\u003eShort form of the number: 69-460\u003c\/li\u003e\n\u003cli\u003eType: Pullers, Rollers \u0026amp; Drive\u003c\/li\u003e\n\u003cli\u003eKansai Special parts books that list this part: DFB, PX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePlay at a gear, pulley or eccentric\u003c\/li\u003e\n\u003cli\u003eTeeth, grooves or running surfaces are chipped, pitted or worn\u003c\/li\u003e\n\u003cli\u003eTiming that drifts or cannot be set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInstall it clean. Lubricate gears and bearings only as the manual for your machine instructs, keep oil off belts and pulley surfaces, and check the alignment and timing afterwards.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eA drive part must suit the part it runs with. Keep the same size and the same tooth or groove form as the old part, even when another part looks close. One Kansai Special number can serve several related models, so compare the part with the old one.\u003c\/p\u003e\n\u003ch3\u003eMore Kansai Special parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-60-3465-0-spacer-set\"\u003eKansai Special 60-3465-0 Spacer Set\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-19-4370-0-retainer-looper-for-dfb\"\u003eKansai Special 19-4370-0 Retainer Looper for DFB\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-45-4320-0-thread-eyelet\"\u003eKansai Special 45-4320-0 Thread Eyelet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-19-4050-0-needle-guide\"\u003eKansai Special 19-4050-0 Needle Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSame group: \u003ca href=\"\/collections\/kansai-special-pullers-rollers-and-drive\"\u003ePullers, Rollers \u0026amp; Drive\u003c\/a\u003e. Same maker: \u003ca href=\"\/collections\/kansai-special-spare-parts\"\u003eall Kansai Special spare parts\u003c\/a\u003e.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":51105717223589,"sku":"KAN-69-460","price":44.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/kp_generic_v2.png?v=1793912220"},{"product_id":"kansai-special-81-3220-0-bushing","title":"Kansai Special 81-3220-0 Bushing","description":"\u003ch2\u003eKansai Special 81-3220-0 Bushing\u003c\/h2\u003e\n\u003cp\u003eThe Kansai Special 81-3220-0 is listed as a bushing. It is the part that sets the running fit between a moving shaft and its seat. Kansai Special lists this part in the books of many machine families, among them FX, DFB and NW\/NL.\u003c\/p\u003e\n\u003cp\u003eThree neighbors decide how a bushing performs: the shaft it carries, the housing it sits in and the oil that reaches it. A close fit on the shaft, a firm fit in the housing and a clear oil path keep the shaft running true.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKansai Special part number: \u003cstrong\u003e81-3220-0\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name: Bushing\u003c\/li\u003e\n\u003cli\u003eShort form of the number: 81-322\u003c\/li\u003e\n\u003cli\u003eType: Pullers, Rollers \u0026amp; Drive\u003c\/li\u003e\n\u003cli\u003eKansai Special parts books that list this part: FX, DFB, NW\/NL and 10 more\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eBushings and bearings are made for one shaft and one housing, so size and shape must match the old part. One Kansai Special number can serve several related models, so compare the part with the old one.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe bore is worn oval, or the part spins in its seat\u003c\/li\u003e\n\u003cli\u003eTiming that drifts or cannot be set\u003c\/li\u003e\n\u003cli\u003eStiff or rough movement when the shaft is turned by hand\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePush it in straight and with even pressure, never by hammering on one edge. If it has an oil hole or groove, line it up with the oil feed.\u003c\/p\u003e\n\u003ch3\u003eMore Kansai Special parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-81-3210-0-bushing\"\u003eKansai Special 81-3210-0 Bushing\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-81-1820-0-bushing\"\u003eKansai Special 81-1820-0 Bushing\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the shaft need to be replaced too?\u003c\/strong\u003e\u003cbr\u003eNot always. If the shaft is smooth and only this part is worn, replacing the part is enough. A shaft with grooves, ridges or a polished worn band should be replaced too, or the new part wears out quickly.\u003c\/p\u003e\n\u003cp\u003eSame group: \u003ca href=\"\/collections\/kansai-special-pullers-rollers-and-drive\"\u003ePullers, Rollers \u0026amp; Drive\u003c\/a\u003e. Same maker: \u003ca href=\"\/collections\/kansai-special-spare-parts\"\u003eall Kansai Special spare parts\u003c\/a\u003e.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":51105717715109,"sku":"KAN-81-322","price":4.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/kp_bushing_v2.png?v=1793912220"},{"product_id":"kansai-special-81-1800-0-bushing","title":"Kansai Special 81-1800-0 Bushing","description":"\u003ch2\u003eKansai Special 81-1800-0 Bushing\u003c\/h2\u003e\n\u003cp\u003eThe Kansai Special 81-1800-0 is listed as a bushing. It is the part that sets the running fit between a moving shaft and its seat. The Kansai Special parts books for DFB list this part.\u003c\/p\u003e\n\u003cp\u003eSeats for bushings and bearings are cut to a close fit. The seat must be clean and undamaged, and the part must go in straight, because a bushing pushed in crooked can be damaged before it has run.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKansai Special part number: \u003cstrong\u003e81-1800-0\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name: Bushing\u003c\/li\u003e\n\u003cli\u003eShort form of the number: 81-180\u003c\/li\u003e\n\u003cli\u003eType: Pullers, Rollers \u0026amp; Drive\u003c\/li\u003e\n\u003cli\u003eKansai Special parts books that list this part: DFB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eBushings and bearings are made for one shaft and one housing, so size and shape must match the old part.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVisible wear or scoring on the part or on the shaft it carries\u003c\/li\u003e\n\u003cli\u003eDark oil with fine metal dust around the part\u003c\/li\u003e\n\u003cli\u003eThe bore is worn oval, or the part spins in its seat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePush it in straight and with even pressure, never by hammering on one edge. If it has an oil hole or groove, line it up with the oil feed.\u003c\/p\u003e\n\u003ch3\u003eMore Kansai Special parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-19-4370-0-retainer-looper-for-dfb\"\u003eKansai Special 19-4370-0 Retainer Looper for DFB\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-45-4320-0-thread-eyelet\"\u003eKansai Special 45-4320-0 Thread Eyelet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-19-4050-0-needle-guide\"\u003eKansai Special 19-4050-0 Needle Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-15-4960-0-dfb-1412p-feed-dog-1-4-in\"\u003eKansai Special 15-4960-0 DFB-1412P Feed Dog 1\/4 in\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the shaft need to be replaced too?\u003c\/strong\u003e\u003cbr\u003eNot always. If the shaft is smooth and only this part is worn, replacing the part is enough. A shaft with grooves, ridges or a polished worn band should be replaced too, or the new part wears out quickly.\u003c\/p\u003e\n\u003cp\u003eBrowse \u003ca href=\"\/collections\/kansai-special-pullers-rollers-and-drive\"\u003eKansai Special pullers, rollers \u0026amp; drive\u003c\/a\u003e, or see \u003ca href=\"\/collections\/kansai-special-spare-parts\"\u003eKansai Special spare parts\u003c\/a\u003e.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":51105718075557,"sku":"KAN-81-180","price":3.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/kp_bushing_v2.png?v=1793912220"},{"product_id":"kansai-special-81-1710-0-bushing","title":"Kansai Special 81-1710-0 Bushing","description":"\u003ch2\u003eKansai Special 81-1710-0 Bushing\u003c\/h2\u003e\n\u003cp\u003ePart 81-1710-0 in the Kansai Special parts list is a bushing. It is a support in which a shaft, bar or pin turns or slides. The Kansai Special parts books for PX list this part.\u003c\/p\u003e\n\u003cp\u003eBushings and sleeves are the parts meant to wear, so that the shaft they carry and the frame around them do not. A worn one is replaced rather than repaired.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKansai Special part number: \u003cstrong\u003e81-1710-0\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name: Bushing\u003c\/li\u003e\n\u003cli\u003eShort form of the number: 81-171\u003c\/li\u003e\n\u003cli\u003eType: Pullers, Rollers \u0026amp; Drive\u003c\/li\u003e\n\u003cli\u003eKansai Special parts books that list this part: PX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDark oil with fine metal dust around the part\u003c\/li\u003e\n\u003cli\u003eThe shaft moves along its length when pushed by hand\u003c\/li\u003e\n\u003cli\u003ePlay, noise or heat at the joint\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePush it in straight and with even pressure, never by hammering on one edge. If it has an oil hole or groove, line it up with the oil feed.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eBushings and bearings are made for one shaft and one housing, so size and shape must match the old part. Compare the part with your old one or with your machine's parts list, because one number can serve several related models.\u003c\/p\u003e\n\u003ch3\u003eMore Kansai Special parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-21-7840-0-front-cover-plate\"\u003eKansai Special 21-7840-0 Front Cover Plate\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-60-3465-0-spacer-set\"\u003eKansai Special 60-3465-0 Spacer Set\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-69-4600-0-pulley\"\u003eKansai Special 69-4600-0 Pulley\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the shaft need to be replaced too?\u003c\/strong\u003e\u003cbr\u003eNot always. If the shaft is smooth and only this part is worn, replacing the part is enough. A shaft with grooves, ridges or a polished worn band should be replaced too, or the new part wears out quickly.\u003c\/p\u003e\n\u003cp\u003eRelated: \u003ca href=\"\/collections\/kansai-special-pullers-rollers-and-drive\"\u003ePullers, Rollers \u0026amp; Drive\u003c\/a\u003e | \u003ca href=\"\/collections\/kansai-special-spare-parts\"\u003eKansai Special spare parts\u003c\/a\u003e.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":51105718239397,"sku":"KAN-81-171","price":6.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/kp_bushing_v2.png?v=1793912220"},{"product_id":"kansai-special-81-3210-0-bushing","title":"Kansai Special 81-3210-0 Bushing","description":"\u003ch2\u003eKansai Special 81-3210-0 Bushing\u003c\/h2\u003e\n\u003cp\u003eKansai Special spare part 81-3210-0: Bushing. This is one of the sleeves, bearings or housings that keep shafts and bars running true. Kansai Special lists this part in the books of many machine families, among them FX, DFB and NW\/NL.\u003c\/p\u003e\n\u003cp\u003eSeats for bushings and bearings are cut to a close fit. The seat must be clean and undamaged, and the part must go in straight, because a bushing pushed in crooked can be damaged before it has run.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKansai Special part number: \u003cstrong\u003e81-3210-0\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name: Bushing\u003c\/li\u003e\n\u003cli\u003eShort form of the number: 81-321\u003c\/li\u003e\n\u003cli\u003eType: Pullers, Rollers \u0026amp; Drive\u003c\/li\u003e\n\u003cli\u003eKansai Special parts books that list this part: FX, DFB, NW\/NL and 12 more\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe shaft moves along its length when pushed by hand\u003c\/li\u003e\n\u003cli\u003eDark oil with fine metal dust around the part\u003c\/li\u003e\n\u003cli\u003eTiming that drifts or cannot be set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote the depth and the direction of any oil hole before you remove the old part, and fit the new one the same way. Work only with the machine switched off and unplugged.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eBushings can come in upper and lower, or left and right versions that look alike. When the name carries a position, choose the same position.\u003c\/p\u003e\n\u003ch3\u003eMore Kansai Special parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-81-3220-0-bushing\"\u003eKansai Special 81-3220-0 Bushing\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-81-1820-0-bushing\"\u003eKansai Special 81-1820-0 Bushing\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRelated: \u003ca href=\"\/collections\/kansai-special-pullers-rollers-and-drive\"\u003ePullers, Rollers \u0026amp; Drive\u003c\/a\u003e | \u003ca href=\"\/collections\/kansai-special-spare-parts\"\u003eKansai Special spare parts\u003c\/a\u003e.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":51105718272165,"sku":"KAN-81-321","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/kp_bushing_v2.png?v=1793912220"},{"product_id":"kansai-special-81-1820-0-bushing","title":"Kansai Special 81-1820-0 Bushing","description":"\u003ch2\u003eKansai Special 81-1820-0 Bushing\u003c\/h2\u003e\n\u003cp\u003eThe Kansai Special 81-1820-0 is listed as a bushing. It is the part that sets the running fit between a moving shaft and its seat. The Kansai Special parts books for DFB, DLR and NB list this part.\u003c\/p\u003e\n\u003cp\u003eA worn bushing lets the shaft or bar it carries wobble. On a needle bar this shows as needles that deflect, skipped stitches and broken needles. Elsewhere it shows as noise, heat or timing that will not hold.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKansai Special part number: \u003cstrong\u003e81-1820-0\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name: Bushing\u003c\/li\u003e\n\u003cli\u003eShort form of the number: 81-182\u003c\/li\u003e\n\u003cli\u003eType: Pullers, Rollers \u0026amp; Drive\u003c\/li\u003e\n\u003cli\u003eKansai Special parts books that list this part: DFB, DLR, NB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePlay, noise or heat at the joint\u003c\/li\u003e\n\u003cli\u003eTiming that drifts or cannot be set\u003c\/li\u003e\n\u003cli\u003eThe shaft moves along its length when pushed by hand\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePush it in straight and with even pressure, never by hammering on one edge. If it has an oil hole or groove, line it up with the oil feed.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eNames such as Bushing, Sleeve or Bearing cover many sizes and shapes. The part number tells which one you need. Compare the part with your old one or with your machine's parts list, because one number can serve several related models.\u003c\/p\u003e\n\u003ch3\u003eMore Kansai Special parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-19-4050-0-needle-guide\"\u003eKansai Special 19-4050-0 Needle Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-27-0440-0-side-cover\"\u003eKansai Special 27-0440-0 Side Cover\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-60-3465-0-spacer-set\"\u003eKansai Special 60-3465-0 Spacer Set\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-67-1800-0-puller-connecting-lever\"\u003eKansai Special 67-1800-0 Puller Connecting Lever\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBrowse \u003ca href=\"\/collections\/kansai-special-pullers-rollers-and-drive\"\u003eKansai Special pullers, rollers \u0026amp; drive\u003c\/a\u003e, or see \u003ca href=\"\/collections\/kansai-special-spare-parts\"\u003eKansai Special spare parts\u003c\/a\u003e.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":51105719156901,"sku":"KAN-81-182","price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/kp_bushing_v2.png?v=1793912220"},{"product_id":"kansai-special-91-4050-0-bearing","title":"Kansai Special 91-4050-0 Bearing","description":"\u003ch2\u003eKansai Special 91-4050-0 Bearing\u003c\/h2\u003e\n\u003cp\u003ePart 91-4050-0 in the Kansai Special parts list is a bearing. It is a bushing, bearing, sleeve or housing that supports a moving part. Kansai Special lists this part in the books of many machine families, among them FX, DFB and NR.\u003c\/p\u003e\n\u003cp\u003eSeats for bushings and bearings are cut to a close fit. The seat must be clean and undamaged, and the part must go in straight, because a bushing pushed in crooked can be damaged before it has run.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKansai Special part number: \u003cstrong\u003e91-4050-0\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name: Bearing\u003c\/li\u003e\n\u003cli\u003eShort form of the number: 91-405\u003c\/li\u003e\n\u003cli\u003eType: Pullers, Rollers \u0026amp; Drive\u003c\/li\u003e\n\u003cli\u003eKansai Special parts books that list this part: FX, DFB, NR and 7 more\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePlay, noise or heat at the joint\u003c\/li\u003e\n\u003cli\u003eStiff or rough movement when the shaft is turned by hand\u003c\/li\u003e\n\u003cli\u003eTiming that drifts or cannot be set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eClean the seat and the shaft before fitting. Afterwards turn the shaft by hand: it should move freely, with no stiffness and no sideways play.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eBushings and bearings are made for one shaft and one housing, so size and shape must match the old part. The part number is the safest check: the same number can be used on more than one model.\u003c\/p\u003e\n\u003ch3\u003eMore Kansai Special parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-91-4060-0-needle-gauge\"\u003eKansai Special 91-4060-0 Needle Gauge\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-91-4070-0-bearing\"\u003eKansai Special 91-4070-0 Bearing\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSame group: \u003ca href=\"\/collections\/kansai-special-pullers-rollers-and-drive\"\u003ePullers, Rollers \u0026amp; Drive\u003c\/a\u003e. Same maker: \u003ca href=\"\/collections\/kansai-special-spare-parts\"\u003eall Kansai Special spare parts\u003c\/a\u003e.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":51105720893605,"sku":"KAN-91-405","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/kp_bushing_v2.png?v=1793912220"},{"product_id":"kansai-special-91-4070-0-bearing","title":"Kansai Special 91-4070-0 Bearing","description":"\u003ch2\u003eKansai Special 91-4070-0 Bearing\u003c\/h2\u003e\n\u003cp\u003eKansai Special 91-4070-0 is a bearing, a support in which a shaft, bar or pin turns or slides. The same part number is used across many Kansai Special machine families, for example FX, DFB and NW\/NL.\u003c\/p\u003e\n\u003cp\u003eThree neighbors decide how a bushing performs: the shaft it carries, the housing it sits in and the oil that reaches it. A close fit on the shaft, a firm fit in the housing and a clear oil path keep the shaft running true.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKansai Special part number: \u003cstrong\u003e91-4070-0\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name: Bearing\u003c\/li\u003e\n\u003cli\u003eShort form of the number: 91-407\u003c\/li\u003e\n\u003cli\u003eType: Pullers, Rollers \u0026amp; Drive\u003c\/li\u003e\n\u003cli\u003eKansai Special parts books that list this part: FX, DFB, NW\/NL and 10 more\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDark oil with fine metal dust around the part\u003c\/li\u003e\n\u003cli\u003eVisible wear or scoring on the part or on the shaft it carries\u003c\/li\u003e\n\u003cli\u003ePlay, noise or heat at the joint\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote the depth and the direction of any oil hole before you remove the old part, and fit the new one the same way. Work only with the machine switched off and unplugged.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eBushings and bearings are made for one shaft and one housing, so size and shape must match the old part.\u003c\/p\u003e\n\u003ch3\u003eMore Kansai Special parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-91-4060-0-needle-gauge\"\u003eKansai Special 91-4060-0 Needle Gauge\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kansai-special-91-4050-0-bearing\"\u003eKansai Special 91-4050-0 Bearing\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMore in this group: \u003ca href=\"\/collections\/kansai-special-pullers-rollers-and-drive\"\u003eKansai Special pullers, rollers \u0026amp; drive\u003c\/a\u003e. Everything from this maker: \u003ca href=\"\/collections\/kansai-special-spare-parts\"\u003eall Kansai Special spare parts\u003c\/a\u003e.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":51105720959141,"sku":"KAN-91-407","price":26.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/kp_bushing_v2.png?v=1793912220"}],"url":"https:\/\/prizzisewing.com\/collections\/kansai-special-pullers-rollers-and-drive.oembed","provider":"PRIZZI SEWING MACHINE CO.","version":"1.0","type":"link"}