{"title":"JUKI LH-3528 Spare Parts","description":"\u003cp\u003eJUKI spare parts that fit the LH-3528 series double-needle lockstitch machines. The list follows the official JUKI parts list. Order by the JUKI part number.\u003c\/p\u003e","products":[{"product_id":"juki-22921605-thread-take-up-spring","title":"Resorte tira-hilo JUKI 22921605","description":"\u003ch2\u003eJUKI 22921605 Thread Take-Up Spring\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 22921605: Thread Take-Up Spring. This is a spring that supplies the force for a specific movement or setting. Our service team lists it for JUKI DDL-8700, DDL-8700H, DDL-8700-7, DDL-8700H-7 and DDL-8000A series.\u003c\/p\u003e\n\u003cp\u003eSprings in a sewing machine return levers and hold tensions and pressures at a set value. They lose force over time, and a weak spring changes how the mechanism around it behaves.\u003c\/p\u003e\n\u003ch3\u003eHow long does it usually last?\u003c\/h3\u003e\n\u003cp\u003eAccording to general service data, on a machine in regular industrial use this part is typically replaced about once a year. This is only a rough guide. Actual life depends on how many hours the machine runs, the fabrics and thread you sew, the stitch speed, how well the machine is cleaned and oiled, and its general condition. Treat the figure as a planning aid, not a guarantee. It is good to have one on the shelf for the day it is needed.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e22921605\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name: Thread Take-Up Spring\u003c\/li\u003e\n\u003cli\u003eType: Springs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 22921605 is used on: JUKI DDL-8700, DDL-8700H, DDL-8700-7, DDL-8700H-7 and DDL-8000A series.\u003c\/p\u003e\n\u003cp\u003eThe list comes from our service team's parts matrix. Machine names are written the way JUKI writes them.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA setting no longer holds or the movement feels weak\u003c\/li\u003e\n\u003cli\u003eThe spring is stretched, bent, kinked or broken\u003c\/li\u003e\n\u003cli\u003eTension or pressure drifts even after adjustment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInstall it in the same position and hook it the same way as the original, and check the adjustment that depends on it afterwards.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eSprings differ in length, wire thickness and force even when they look alike, so match the JUKI number rather than the look. This part is also included in the JUKI DDL parts kit: \u003ca href=\"\/es\/products\/juki-40164792-ddl-parts-kit\"\u003eJUKI 40164792 DDL Parts Kit\u003c\/a\u003e, handy if you want to stock several wear parts at once.\u003c\/p\u003e\n\u003ch3\u003eOther wear parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-11038759-bobbin-case-assembly\"\u003eJUKI 11038759 Bobbin Case Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22932909-bobbin\"\u003eJUKI 22932909 Bobbin\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-ss7091110tp-screw-9-64-40-l-10-5\"\u003eJUKI SS7091110TP Screw 9\/64-40 L=10.5\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22907554-presser-spring-regulator-nut-assembly\"\u003eJUKI 22907554 Presser Spring Regulator Nut Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-ss7080510tp-screw-1-8-44-l-4-5\"\u003eJUKI SS7080510TP Screw 1\/8-44 L=4.5\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I stretch or shorten a spring to adjust it?\u003c\/strong\u003e\u003cbr\u003eNo. A modified spring will not give the force the mechanism was designed for. Replace it with the correct part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow often should I replace it?\u003c\/strong\u003e\u003cbr\u003eAs a rough guide, about once a year on a machine in regular industrial use. The real interval depends on running hours, fabric, thread, speed and maintenance, so inspect the part regularly and replace it when it shows wear.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":47526877069477,"sku":"JUK-22921605","price":2.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/1600_1600-1_de9624b2-fb68-486c-af69-cf0c1ab0799d.jpg?v=1773050137"},{"product_id":"juki-22907554-presser-spring-regulator-nut-assembly","title":"Conjunto de tuerca reguladora del resorte del prensatelas JUKI 22907554","description":"\u003ch2\u003eJUKI 22907554 Presser Spring Regulator Nut Assembly\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 22907554: Presser Spring Regulator Nut Assembly. This is the adjusting nut assembly of the presser spring. Our service team lists it for JUKI DDL-8700, DDL-8700H, DDL-8700-7, DDL-8700H-7 and DDL-8000A series.\u003c\/p\u003e\n\u003cp\u003eTurning it sets how hard the presser foot presses on the fabric, so the fabric feeds evenly without marks.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e22907554\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name: Presser Spring Regulator Nut Assembly\u003c\/li\u003e\n\u003cli\u003eType: Presser Parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 22907554 is used on: JUKI DDL-8700, DDL-8700H, DDL-8700-7, DDL-8700H-7 and DDL-8000A series.\u003c\/p\u003e\n\u003cp\u003eThe list comes from our service team's parts matrix. Machine names are written the way JUKI writes them.\u003c\/p\u003e\n\u003ch3\u003eBefore you install it\u003c\/h3\u003e\n\u003cp\u003eInstall the part with its original pins, screws and washers, oil the pivots as your machine's manual instructs, and recheck the related adjustment. Switch the machine off and unplug it before you start, and turn the handwheel by hand through a full stitch before the first run.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eThese parts are specific to the machine and often to a left or right position.\u003c\/p\u003e\n\u003ch3\u003eOther wear parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-11038759-bobbin-case-assembly\"\u003eJUKI 11038759 Bobbin Case Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22932909-bobbin\"\u003eJUKI 22932909 Bobbin\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22921605-thread-take-up-spring\"\u003eJUKI 22921605 Thread Take-Up Spring\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-ss7091110tp-screw-9-64-40-l-10-5\"\u003eJUKI SS7091110TP Screw 9\/64-40 L=10.5\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-ss7080510tp-screw-1-8-44-l-4-5\"\u003eJUKI SS7080510TP Screw 1\/8-44 L=4.5\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":47526906822821,"sku":"JUK-22907554","price":2.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/1600_1600_d937621e-e41e-4094-8ce4-7ce97934ae77.jpg?v=1773050143"},{"product_id":"juki-22958052-rubber-hinge-assembly","title":"JUKI 22958052 Rubber Hinge Assembly","description":"\u003ch2\u003eJUKI 22958052 Rubber Hinge Assembly\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 22958052: Rubber Hinge Assembly for JUKI industrial sewing machines. It replaces the earlier JUKI part number 22926000.\u003c\/p\u003e\n\u003cp\u003eRubber parts wear and harden with time and are a normal replacement item.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e22958052\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Rubber Hinge Asm.\u003c\/li\u003e\n\u003cli\u003eReplaces the earlier part number 22926000\u003c\/li\u003e\n\u003cli\u003eListed in 39 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 22958052 is used on these JUKI machines: DDL-7000A-7; DX-01; DDL-8000AS,AB; DDL-900B; DDL-900BB; DDL-9000B\/X73199; DDL-9000C-S; DDL-9000C-F; DLN-9010; DDL-9000A; DDL-8000AP; DDL-9000A\/PBN; DDL-9000B; DDL-900A; DDL-9000; DLN-9010A; LH-3500A Series; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LZ-2280B; LZ-2280A\/LZ-2280A-7 Series; LZ-2290C; LZ-2290\/LZ-2290-7; LZ-2290A\/LZ-2290A-7\/LZ-2290A-SR-7; MP-200N; ML-111; AE-200AN; AE-200A; DU-1181N; DU-1181N-7; LZH-1290 Series; DU-140; LU-1565N; DU-141H-7; DU-580; DU-141NH; LU-2810-6,2860-6; LU-1508\/LU-1508H; LU-1510,1510-7; LU-1560\/LU-1560-7.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22890404-rp-hook-c\"\u003eJUKI 22890404 RP Hook C\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22907406-presser-spring\"\u003eJUKI 22907406 Presser Spring\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40000264-bobbin-case-assembly\"\u003eJUKI 40000264 Bobbin Case Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-23631807-reverse-feed-switch-shaft\"\u003eJUKI 23631807 Reverse Feed Switch Shaft\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22901250-slide-plate-assembly\"\u003eJUKI 22901250 Slide Plate Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eI have the old number 22926000. Is this the right part?\u003c\/strong\u003e\u003cbr\u003eYes. JUKI lists 22958052 as the replacement for 22926000.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50580338081957,"sku":"JUK-22958052","price":12.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/rubber_v2.png?v=1792234173"},{"product_id":"juki-b9117563000-bobbin","title":"JUKI B9117563000 Bobbin","description":"\u003ch2\u003eJUKI B9117563000 Bobbin\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part B9117563000: Bobbin for JUKI industrial sewing machines.\u003c\/p\u003e\n\u003cp\u003eThe bobbin holds the bottom thread; it sits in the bobbin case and forms the stitch together with the needle thread.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003eB9117563000\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Bobbin\u003c\/li\u003e\n\u003cli\u003eListed in 14 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart B9117563000 is used on these JUKI machines: LH-3500A Series; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3178\/LH-3178-7; LH-3188\/LH-3188-7; LU-1560N\/LU-1560N-7; LU-1565N; LU-1508N\/LU-1508NH; LU-1561N\/LU-1561N-7; LU-1509N\/LU-1509NH\/LU-1511N-7; LU-1510N; LU-562N\/LU-563N; LU-1508\/LU-1508H; LU-1510,1510-7; LU-1560\/LU-1560-7.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-b1830563ba0-hook-assembly-for-extreme-thick-thread\"\u003eJUKI B1830563BA0 Hook Assembly for Extreme Thick Thread\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-10755205-belt-cover-c\"\u003eJUKI 10755205 Belt Cover C\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-ss9151440cp-screw-15-64-28-l-14\"\u003eJUKI SS9151440CP Screw 15\/64-28 L=14\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-b1611055000-screw-feed-rock-shaft\"\u003eJUKI B1611055000 Screw Feed Rock Shaft\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-10748101-oil-removing-setscrew-packing\"\u003eJUKI 10748101 Oil Removing Setscrew Packing\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the Bobbin do?\u003c\/strong\u003e\u003cbr\u003eThe bobbin holds the bottom thread; it sits in the bobbin case and forms the stitch together with the needle thread.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50580347191461,"sku":"JUK-B9117563000","price":8.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/bobbin_v2.png?v=1792234173"},{"product_id":"juki-22945505-thread-tension-spring","title":"JUKI 22945505 Thread Tension Spring","description":"\u003ch2\u003eJUKI 22945505 Thread Tension Spring\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 22945505: Thread Tension Spring for JUKI industrial sewing machines.\u003c\/p\u003e\n\u003cp\u003eSprings lose tension with use; replacing a tired spring restores correct thread or presser control.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e22945505\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Thread Tension Spring\u003c\/li\u003e\n\u003cli\u003eListed in 66 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 22945505 is used on these JUKI machines: DDL-8500; DDL-8500-7; DDL-8700 Series; DDL-8700-7; DDL-7000A-7; DDL-8000AS,AB; DDL-900B; DLN-9010; DP-2100; DLD-5430N\/DLD-5430N-7; DLN-5410N-7\/DLN-5410NH-7\/DLN-5410NJ-7; DLU-5490N-7 Series; DLU-5494N-7; DDL-5571N\/DDL-5581N; DDL-5550N-7 Series; DDL-9000A; DDL-8000AP; DDL-9000A\/PBN; DDL-5556N-7-WB; DMN-5420N-7; DLM-5400N-7 Series; DDL-8100B-7\/DDL-8100B-7R; DDL-8700B-7; DDL-8700A-7; DDL-900A; DDL-9000; DLN-9010A; DLM-5400NDD-7; DMN-5420NDD-7; DLN-5410NDD-7; LH-3500A Series; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-4128\/LH-4128-7\/LH-4168-7\/LH-4188-7; MF-7500 Series; MF-7800D; MF-7700D; MF-7200D; MF-7900 Series; MF-7500D Series; MF-7900D Series; UT59; MF-7900D-H24; MF-7700; MF-7800; APW-895N; APW-896N; APW-895NE\/IP-420; AE-200AN; APW-895; APW-896; APW-895L; AE-200A; DNU-1541\/DNU-1541H\/DNU-1541S; LU-1520NCS-7; LU-1560N\/LU-1560N-7; LU-1565N; LU-1520N-7\/LU-1521N-7; LU-1508N\/LU-1508NH; LU-1510N-7\/LU-1510NA-7; LU-1561N\/LU-1561N-7; LU-1509N\/LU-1509NH\/LU-1511N-7; LU-1510N; DNU-1541-7; LS-1340\/LS-1341; LS-1342\/LS-1342-7; LS-2342\/LS-2342-7.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22945463-thread-tension-assembly\"\u003eJUKI 22945463 Thread Tension Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-ro092270200-rubber-ring\"\u003eJUKI RO092270200 Rubber Ring\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-11038650-hook-assembly\"\u003eJUKI 11038650 Hook Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22907406-presser-spring\"\u003eJUKI 22907406 Presser Spring\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22901250-slide-plate-assembly\"\u003eJUKI 22901250 Slide Plate Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the Thread Tension Spring do?\u003c\/strong\u003e\u003cbr\u003eSprings lose tension with use; replacing a tired spring restores correct thread or presser control.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50580347224229,"sku":"JUK-22945505","price":1.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/spring_v2.png?v=1792234173"},{"product_id":"juki-b3114232000-thread-tension-spring","title":"JUKI B3114232000 Thread Tension Spring","description":"\u003ch2\u003eJUKI B3114232000 Thread Tension Spring\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part B3114232000: Thread Tension Spring for JUKI industrial sewing machines. It replaces the earlier JUKI part number 22962005.\u003c\/p\u003e\n\u003cp\u003eSprings lose tension with use; replacing a tired spring restores correct thread or presser control.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003eB3114232000\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Thread Tension Spring\u003c\/li\u003e\n\u003cli\u003eReplaces the earlier part number 22962005\u003c\/li\u003e\n\u003cli\u003eListed in 69 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart B3114232000 is used on these JUKI machines: DDL-5530N Series; DDL-5550N Series; DDL-8500; DDL-8500-7; DDL-8300; DDL-8700 Series; DDL-8700-7; DDL-7000A-7; DDL-8000AS,AB; DDL-900B; DDL-900BB; DDL-9000B\/X73199; DDL-9000C-S; DLN-9010; DDL-5570N\/DDL-5580N Series; DLN-5410N-7\/DLN-5410NH-7\/DLN-5410NJ-7; DLN-5410 Series; DLN-5410N Series; DDL-5571N\/DDL-5581N; DDL-5550N-7 Series; DDL-9000A; DDL-8000AP; DDL-9000B; DDL-8700B-7; DDL-8700A-7; DDL-9000; DLN-6390\/DLN-6390-7; DLN-9010A; DLN-5410NDD-7; LH-3128-7\/LH-3128; LH-3500A Series; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3168-7\/LH-3168; LH-3162-4\/LH-3162-7; LH-3178\/LH-3178-7; LH-3188\/LH-3188-7; LH-3182-4\/LH-3182-7; LH-4128\/LH-4128-7\/LH-4168-7\/LH-4188-7; MB-373NS\/MB-377NS; LK-1850 Series; LK-1851-555\/BR20; LK-1952\/LK-1953\/LK-1954; LK-1900; LK-1930; LK-1900S Series; LK-1910\/LK-1920\/MC592; LK-1910,LK-1920\/MC676; AMS-205C\/206C; APW-895N; APW-896N; APW-895NE\/IP-420; APW-895; ACF-164-1851; APW-896; APW-895L; AVP-875\/AW2; AMS-215C\/AMS-215P; AMS-223C; AMS-221ENTS-3020; AMS-220C; AMS-220C\/AMS-220P; AMS-224C; AMS-210D; AMS-221D\/AMS-215D; LZH-1290 Series; DDL-5600NL-7\/DDL-5600NU-7\/DDL-5600NJ-7\/DDL-5600NR-7; DDL-5600NL\/DDL-5600NU\/DDL-5600NJ\/DDL-5600NR; DU-1181N; DSU-142\/DSU-142-4,-7.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-ss8660610tp-screw-1-4-40-l-6\"\u003eJUKI SS8660610TP Screw 1\/4-40 L=6\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22907703-presser-guide-bar\"\u003eJUKI 22907703 Presser Guide Bar\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-ro092270200-rubber-ring\"\u003eJUKI RO092270200 Rubber Ring\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22901250-slide-plate-assembly\"\u003eJUKI 22901250 Slide Plate Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22907406-presser-spring\"\u003eJUKI 22907406 Presser Spring\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the Thread Tension Spring do?\u003c\/strong\u003e\u003cbr\u003eSprings lose tension with use; replacing a tired spring restores correct thread or presser control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eI have the old number 22962005. Is this the right part?\u003c\/strong\u003e\u003cbr\u003eYes. JUKI lists B3114232000 as the replacement for 22962005.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50580362231973,"sku":"JUK-B3114232000","price":2.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/spring_v2.png?v=1792234173"},{"product_id":"juki-22907406-presser-spring","title":"JUKI 22907406 Presser Spring","description":"\u003ch2\u003eJUKI 22907406 Presser Spring\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 22907406: Presser Spring for JUKI industrial sewing machines. It replaces the earlier JUKI part number B1505227000A.\u003c\/p\u003e\n\u003cp\u003eSprings lose tension with use; replacing a tired spring restores correct thread or presser control.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e22907406\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Presser Spring\u003c\/li\u003e\n\u003cli\u003eReplaces the earlier part number B1505227000A\u003c\/li\u003e\n\u003cli\u003eListed in 69 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 22907406 is used on these JUKI machines: DDL-5530N Series; DDL-5550N Series; DDL-8500; DDL-8500-7; DDL-8300; DDL-8700 Series; DDL-8700-7; DDL-7000A-7; DDL-8000AS,AB; DDL-900B; DDL-900BB; DDL-9000B\/X73199; DDL-9000C-S; DLN-9010; DDL-5570N\/DDL-5580N Series; DP-2100; DLD-5430N\/DLD-5430N-7; DLN-5410N-7\/DLN-5410NH-7\/DLN-5410NJ-7; DLN-5410 Series; DLN-5410N Series; DLU-5490N-7 Series; DLU-5494N-7; DLU-5490N Series; DDL-5571N\/DDL-5581N; DDL-5550N-7 Series; DDL-9000A; DDL-8000AP; DDL-9000A\/PBN; DDL-5556N-7-WB; DDL-9000B; DMN-5420N-7; DLM-5400N-7 Series; DLM-5200N; DDL-8100e; DDL-8100B-7\/DDL-8100B-7R; DDL-8700B-7; DDL-8700A-7; DDL-900A; DDL-9000; DLN-6390\/DLN-6390-7; DLN-9010A; DLM-5400NDD-7; DMN-5420NDD-7; DLN-5410NDD-7; LH-3500A Series; LH-1152; LH-1152-4\/LH-1152-5\/LH-1152-6,LH-1152-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-4128\/LH-4128-7\/LH-4168-7\/LH-4188-7; LZ-2280B; LZ-2280A\/LZ-2280A-7 Series; LZ-2280N\/LZ-2280N-7\/LZ-2282N\/LZ-2282N-7\/LZ-2282NU-7\/LZ-2286NU-7\/LZ-2288NU-7; LZ-2290C; LZ-2280 Series; LZ-2280N\/LZ-2280N-7 Series; LZ-2290\/LZ-2290-7; LZ-2290A\/LZ-2290A-7\/LZ-2290A-SR-7; MH-380\/MH-382; MH-484\/S060_S061; MH-481; MH-486-4\/MH-486-5; MH-481-4 Series\/MH-481-5 Series; MH-484-4\u0026amp;S060_PF-5\/MH-484-5\u0026amp;S060_PF-5; ML-111; LK-1900C; AE-200AN; AE-200A; DDL-5600NL-7\/DDL-5600NU-7\/DDL-5600NJ-7\/DDL-5600NR-7; DDL-5600NL\/DDL-5600NU\/DDL-5600NJ\/DDL-5600NR.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22907703-presser-guide-bar\"\u003eJUKI 22907703 Presser Guide Bar\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-ss8660610tp-screw-1-4-40-l-6\"\u003eJUKI SS8660610TP Screw 1\/4-40 L=6\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22901250-slide-plate-assembly\"\u003eJUKI 22901250 Slide Plate Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22923056-oil-pump-assembly\"\u003eJUKI 22923056 Oil Pump Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22921001-screw\"\u003eJUKI 22921001 Screw\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the Presser Spring do?\u003c\/strong\u003e\u003cbr\u003eSprings lose tension with use; replacing a tired spring restores correct thread or presser control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eI have the old number B1505227000A. Is this the right part?\u003c\/strong\u003e\u003cbr\u003eYes. JUKI lists 22907406 as the replacement for B1505227000A.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50580390674597,"sku":"JUK-22907406","price":4.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/spring_v2.png?v=1792234173"},{"product_id":"juki-sm4041655sp-screw-m4-l-16","title":"JUKI SM4041655SP Screw M4 L=16","description":"\u003ch2\u003eJUKI SM4041655SP Screw M4 L=16\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part SM4041655SP: Screw M4 L=16 for JUKI industrial sewing machines.\u003c\/p\u003e\n\u003cp\u003eSmall fasteners like this are easy to lose or strip during service, so it is worth keeping spares on hand.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003eSM4041655SP\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Screw M4 L=16\u003c\/li\u003e\n\u003cli\u003eListed in 69 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart SM4041655SP is used on these JUKI machines: DDL-8500-7; DDL-8700-7; DLD-5430N\/DLD-5430N-7; DLN-5410N-7\/DLN-5410NH-7\/DLN-5410NJ-7; DLU-5490N-7 Series; DLU-5494N-7; DDL-5571N\/DDL-5581N; DDL-5550N-7 Series; DDL-5556N-7-WB; DMN-5420N-7; DLM-5400N-7 Series; DLM-5400NDD-7; DMN-5420NDD-7; DLN-5410NDD-7; LH-4500C; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3120; LH-3126F; LH-4128\/LH-4128-7\/LH-4168-7\/LH-4188-7; MF-7500 Series; MF-7800D; MF-7724-U10-D60; MF-7700D; MF-7200D; MF-7900 Series; MF-7500D Series; MF-7900D Series; UT59; MF-7700; MF-7800; MF-7700\/UT33; MEB-3200C; MEB-3200; LK-1900BN Series; LK-1900AN Series; LK-1900B Series; LK-1900A; AMS-221ENTS-3020\/X90016; AMS-221F; ASN-690\/SC-921; APW-895N; APW-896N; APW-895NE\/IP-420; APW-895; APW-896; APW-895L; ASN-690\/SC-510; AB-1351; AMB-289; T051; UT-21\/UT-22; UT-23; UT-31; T041; UT-42\/UT-45 (For Export); UT-37; UT-51\/UT-52; UT-55,56,57; UT-35; UT25; UT33; AMS-221EN\/IP-420; AMS-221ENTS-3020; NA-P3020; AMS-210E; AMS-221E\/IP-410; AMS-221FR\/AW3; AB-1360; DDL-5600NL-7\/DDL-5600NU-7\/DDL-5600NJ-7\/DDL-5600NR-7.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22945505-thread-tension-spring\"\u003eJUKI 22945505 Thread Tension Spring\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-ta1050504r0-rubber-plug\"\u003eJUKI TA1050504R0 Rubber Plug\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-wp0320501sc-washer-m3\"\u003eJUKI WP0320501SC Washer M3\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40014965-shuttle-w\"\u003eJUKI 40014965 Shuttle (W)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22931703-knee-lifter-push-rod\"\u003eJUKI 22931703 Knee Lifter Push Rod\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50580391067813,"sku":"JUK-SM4041655SP","price":0.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/screw_v2.png?v=1792234173"},{"product_id":"juki-sm4042001sc-screw-m4-x-20","title":"JUKI SM4042001SC Screw M4 X 20","description":"\u003ch2\u003eJUKI SM4042001SC Screw M4 X 20\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part SM4042001SC: Screw M4 X 20 for JUKI industrial sewing machines.\u003c\/p\u003e\n\u003cp\u003eSmall fasteners like this are easy to lose or strip during service, so it is worth keeping spares on hand.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003eSM4042001SC\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Screw M4 X 20\u003c\/li\u003e\n\u003cli\u003eListed in 37 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart SM4042001SC is used on these JUKI machines: LH-3128-7\/LH-3128; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3168-7\/LH-3168; LH-3178\/LH-3178-7; LH-3188\/LH-3188-7; LH-3126F; LH-4128\/LH-4128-7\/LH-4168-7\/LH-4188-7; MO-6700DA; MO-6700D; MO-6700S; MO-6100D; MF-7800D; MF-7700D; MF-3620; MF-7200D; MF-7700; MF-7800; MOL-254; ASN-690\/SC-921; APW-895N; APW-896N; APW-895NE\/IP-420; AE-200AN; APW-895; APW-896; APW-895L; ASN-690\/SC-510; AE-200A; AP-876; AP-874; APW-194N; APW-195N; APW-196N; AMS-224EN\/IP420; AMS-224E\/IP-410; AMS-224EN6060\/IP-420; AMS-224EN4530R.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-wp0320501sc-washer-m3\"\u003eJUKI WP0320501SC Washer M3\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-12347308-screwdriver-small\"\u003eJUKI 12347308 Screwdriver (Small)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-nm6030001sc-nut-m3x0-5-type1\"\u003eJUKI NM6030001SC Nut M3X0.5 TYPE1\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-ta1050504r0-rubber-plug\"\u003eJUKI TA1050504R0 Rubber Plug\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22945505-thread-tension-spring\"\u003eJUKI 22945505 Thread Tension Spring\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50580391133349,"sku":"JUK-SM4042001SC","price":0.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/screw_v2.png?v=1792234173"},{"product_id":"juki-22927354-bobbin-winder-complete","title":"JUKI 22927354 Bobbin Winder Complete","description":"\u003ch2\u003eJUKI 22927354 Bobbin Winder Complete\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 22927354: Bobbin Winder Complete for JUKI industrial sewing machines. It replaces the earlier JUKI part number 11077567.\u003c\/p\u003e\n\u003cp\u003eThe bobbin winder fills the bobbin from the thread spool.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e22927354\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Bobbin Winder Compl.\u003c\/li\u003e\n\u003cli\u003eReplaces the earlier part number 11077567\u003c\/li\u003e\n\u003cli\u003eListed in 45 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 22927354 is used on these JUKI machines: DDL-5530N Series; DDL-5550N Series; DDL-8500; DDL-8500-7; DDL-8300; DDL-8700 Series; DDL-8700-7; DLD-5430N\/DLD-5430N-7; DLN-5410N-7\/DLN-5410NH-7\/DLN-5410NJ-7; DLN-5410 Series; DLN-5410N Series; DLU-5490N-7 Series; DLU-5494N-7; DLU-5490N Series; DDL-5571N\/DDL-5581N; DDL-5550N-7 Series; DDL-5556N-7-WB; DMN-5420N-7; DLM-5400N-7 Series; DLM-5200N; DDL-8100e; DLN-6390\/DLN-6390-7; LH-3128-7\/LH-3128; LH-1152; LH-1152-4\/LH-1152-5\/LH-1152-6,LH-1152-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3168-7\/LH-3168; LH-3162-4\/LH-3162-7; LH-3182-4\/LH-3182-7; LH-3120; LH-3126F; APW-194N; APW-195N; APW-196N; DU-1181N; DU-1181N-7; DDL-5600NL-7\/DDL-5600NU-7\/DDL-5600NJ-7\/DDL-5600NR-7; DDL-5600NL\/DDL-5600NU\/DDL-5600NJ\/DDL-5600NR; DSC-245,-4,-7; DSU-142\/DSU-142-4,-7; DSC-244V\/DSC-244V-4\/DSC-244V-6; DSC-244\/DSC-244-4\/DSC-244-6; DSC-245V-4,-7; PLH-981,982; PLN-985,986.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22931703-knee-lifter-push-rod\"\u003eJUKI 22931703 Knee Lifter Push Rod\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-ss8681650tp-screw-9-32-28-l-16\"\u003eJUKI SS8681650TP Screw 9\/32-28 L=16\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22923056-oil-pump-assembly\"\u003eJUKI 22923056 Oil Pump Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22921001-screw\"\u003eJUKI 22921001 Screw\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-11024700-gasket\"\u003eJUKI 11024700 Gasket\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the Bobbin Winder Complete do?\u003c\/strong\u003e\u003cbr\u003eThe bobbin winder fills the bobbin from the thread spool.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eI have the old number 11077567. Is this the right part?\u003c\/strong\u003e\u003cbr\u003eYes. JUKI lists 22927354 as the replacement for 11077567.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50580411875493,"sku":"JUK-22927354","price":40.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/winder_v2.png?v=1792234173"},{"product_id":"juki-ss6080410sp-screw-1-8-44-l-4","title":"JUKI SS6080410SP Screw 1\/8-44 L=4","description":"\u003ch2\u003eJUKI SS6080410SP Screw 1\/8-44 L=4\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part SS6080410SP: Screw 1\/8-44 L=4 for JUKI industrial sewing machines.\u003c\/p\u003e\n\u003cp\u003eSmall fasteners like this are easy to lose or strip during service, so it is worth keeping spares on hand.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003eSS6080410SP\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Screw 1\/8-44 L=4\u003c\/li\u003e\n\u003cli\u003eListed in 93 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart SS6080410SP is used on these JUKI machines: DDL-5530N Series; DDL-5550N Series; DDL-8500; DDL-8500-7; DDL-8300; DDL-8700 Series; DDL-8700-7; DDL-900B; DDL-900BB; DDL-5570N\/DDL-5580N Series; DLD-5430N\/DLD-5430N-7; DLU-5490N-7 Series; DLU-5494N-7; DLU-5490N Series; DDL-5571N\/DDL-5581N; DDL-5550N-7 Series; DDL-5556N-7-WB; DMN-5420N-7; DLM-5400N-7 Series; DLM-5200N; DDL-8100e; DDL-8700B-7; DDL-8700A-7; DDL-900A; DLM-5400NDD-7; DMN-5420NDD-7; LH-4500C; LH-3500A Series; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3168-7\/LH-3168; LH-3162-4\/LH-3162-7; LH-3188\/LH-3188-7; LH-3182-4\/LH-3182-7; MO-6700DA-0E4\/MO-6714DA-BE6\/MO-6716DA-DE4; MO-6700DA; MO-6700D; MO-3900\/MO-3904\/MO-3914\/MO-3916; MO-3900 Upper Looper Extra-high Throw Spec.; MOC-3904\/MOC-3914; MO-3704E\/MO-3714E\/MO-3716E; MO-3604\/MO-3616; MOR-3900; MOF-3900; MOJ-3900; MOG-3700; MO-6914; MO-6714; MO-6700S-0E4\/MO-6714S-BE\/MO-6716S-DE4; MO-6904S-0E4\/MO-6914S-BE6\/MO-6916S-DE; MO-6904R-0E4\/MO-6914R-BE6\/MO-6916R-DE4; MO-6700S Series; MO-6100D; MO-6904C-0E6\/MO-6914C-BE6; MO-6904G-0F6\/MO-6914G-CH6\/MO-6916G-FH6; MO-6904J-0F6\/MO-6914J-CH6\/MO-6916J-FH6; MS-1190\/MS-1190M; MH-380\/MH-382; MH-484\/S060_S061; MH-481; MH-486-4\/MH-486-5; MH-481-4 Series\/MH-481-5 Series; MH-484-4\u0026amp;S060_PF-5\/MH-484-5\u0026amp;S060_PF-5; MS-3580 Series; MP-200N; LK-1851-555\/BR20; LK-1952\/LK-1953\/LK-1954; MOL-254N; AMB-188N; MOL-254; ASN-690\/SC-921; APW-896N; AE-200AN; APW-896; ASN-690\/SC-510; AE-200A; MOL-154; AMB-189N; AMB-187N; APW-194N; APW-195N; APW-196N; T042; T043; T051; T042S; T045\/T046; AE-8; PS-700; TU-273; TNU-243; TSN-421\/TSC-441; TSH-411\/TSU-471; TSC-461.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22906200-needle-bar-bushing-lower\"\u003eJUKI 22906200 Needle Bar Bushing, Lower\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22923056-oil-pump-assembly\"\u003eJUKI 22923056 Oil Pump Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22907406-presser-spring\"\u003eJUKI 22907406 Presser Spring\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-13102900-large-thread-guide\"\u003eJUKI 13102900 Large Thread Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22907703-presser-guide-bar\"\u003eJUKI 22907703 Presser Guide Bar\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50580419870885,"sku":"JUK-SS6080410SP","price":0.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/screw_v2.png?v=1792234173"},{"product_id":"juki-b91210120a0-oiler-assembly","title":"JUKI B91210120A0 Oiler Assembly","description":"\u003ch2\u003eJUKI B91210120A0 Oiler Assembly\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part B91210120A0: Oiler Assembly for JUKI industrial sewing machines.\u003c\/p\u003e\n\u003cp\u003eOil system parts keep the moving parts of the machine lubricated, which protects the hook and bearings.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003eB91210120A0\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Oiler Asm.\u003c\/li\u003e\n\u003cli\u003eListed in 61 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart B91210120A0 is used on these JUKI machines: DDL-9000B\/X73199; DDL-9000C-S; DDL-9000C-F; DLN-9010; DDL-9000A; DDL-9000B; DDL-9000; DLN-9010A; LH-4500C; LH-3500A Series; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-4128\/LH-4128-7\/LH-4168-7\/LH-4188-7; LZ-2290C; LZ-2290\/LZ-2290-7; LZ-2290A\/LZ-2290A-7\/LZ-2290A-SR-7; MF-3620; MS-1261A; MS-3580 Series; MB-377A,MB-373N\/BR10; LBH-1790S; LBH-1790A\/LBH-1795A; LBH-1796A; LBH-1790AN,LBH-1795AN; LBH-1796AN; MEB-3200C; MEB-3200; MEB-3810; APW-895N; APW-896N; APW-895NE\/IP-420; APW-895; ACF-164-373N; ACF-164-1851; APW-896; AC-172N-1790AN; ACF-164-1903; ACF-164-1800; AW-2; PS-700; LU-2860V-7; LU-2828V-7; DU-1181N; DU-1181N-7; LU-2828-6\/LU-2828-7; LU-2800 Series; LU-2810ES-7,LU-2818ES-7; LU-2828ES-7; LU-1565N; LU-1508N\/LU-1508NH; LU-1509N\/LU-1509NH\/LU-1511N-7; LU-2220N-7; LU-2810-6,2860-6; LU-2212N-7\/2210N-6,-7\/2210W-6,-7\/2260N-7\/2260W-6,-7; LU-1508\/LU-1508H; LU-2216N-7\/LU-2266N-7; DNU-1541-7; DSC-245,-4,-7; DSC-245V-4,-7; DSU-145\/145-4\/145-7; PLC-2700V Series; PLC-2700 Series.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-sm0050801sc-screw\"\u003eJUKI SM0050801SC Screw\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-23631807-reverse-feed-switch-shaft\"\u003eJUKI 23631807 Reverse Feed Switch Shaft\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22958052-rubber-hinge-assembly\"\u003eJUKI 22958052 Rubber Hinge Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-26261503-bobbin-winder-wheel-rubber\"\u003eJUKI 26261503 Bobbin Winder Wheel Rubber\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-ro092270200-rubber-ring\"\u003eJUKI RO092270200 Rubber Ring\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the Oiler Assembly do?\u003c\/strong\u003e\u003cbr\u003eOil system parts keep the moving parts of the machine lubricated, which protects the hook and bearings.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50580425769125,"sku":"JUK-B91210120A0","price":8.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/oiler_v2.png?v=1792234173"},{"product_id":"juki-nm6030001sc-nut-m3x0-5-type1","title":"JUKI NM6030001SC Nut M3X0.5 TYPE1","description":"\u003ch2\u003eJUKI NM6030001SC Nut M3X0.5 TYPE1\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part NM6030001SC: Nut M3X0.5 TYPE1 for JUKI industrial sewing machines. It replaces the earlier JUKI part number 40010499.\u003c\/p\u003e\n\u003cp\u003eSmall fasteners like this are easy to lose during service, so it is worth keeping spares on hand.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003eNM6030001SC\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Nut M3X0.5 Type1\u003c\/li\u003e\n\u003cli\u003eReplaces the earlier part number 40010499\u003c\/li\u003e\n\u003cli\u003eListed in 80 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart NM6030001SC is used on these JUKI machines: DDL-9000C-S; DP-2100; LH-4500C; LH-3500A Series; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3162-4\/LH-3162-7; LH-3182-4\/LH-3182-7; LH-4128\/LH-4128-7\/LH-4168-7\/LH-4188-7; LZ-2280N\/LZ-2280N-7\/LZ-2282N\/LZ-2282N-7\/LZ-2282NU-7\/LZ-2286NU-7\/LZ-2288NU-7; LZ-2280 Series; LZ-2280N\/LZ-2280N-7 Series; LZ-2290\/LZ-2290-7; LZ-2290A\/LZ-2290A-7\/LZ-2290A-SR-7; MF-7500 Series; MF-7900 Series; MF-7500D Series; MF-7900D Series; MF-7900D-H24; MF-7900DR-H24; MB-377A,MB-373N\/BR10; LK-1900C; LK-1900BN Series; LK-1900AN Series; LK-1952\/LK-1953\/LK-1954; LK-1900B Series; LK-1930; AMS-210EN Name Embroidery type; AMS-221ENHS-3020\/X90019,AMS-221ENTS-3020\/X90020; MOL-254N; AMB-188N; MOL-254; ASN-690\/SC-921; APW-895N; APW-896N; AE-200AN; APW-895; ACF-164-373N; ACF-164-1851; FBS-340N\/FBS-340N-1; APW-896; ASN-690\/SC-510; AC-172N-1790AN; AE-200A; AB-1351; AC-172N-1790; AP-876; FLS-351N; AP-874; AVP-875\/AW2; AMB-189N; AMB-187N; FLS-350NA; APW-194N; APW-195N; APW-196N; ACF-164-1903; FLS-350NA・NB,351NA; ACF-164-1800; ACF-172-1790; AMB-289; AW-2; AVP-875\/AW-2; PS-700; AMS-251; NA-P1510,NA-P2210; AMS-215C\/AMS-215P; AMS-210EN Series; AMS-221EN\/IP-420; AMS-224EN\/IP420; AMS-223C; AMS-221RCHS; AMS-224EN4530R\/AW3; NA-P3020; AMS-210E; AMS-221E\/IP-410; AMS-221FR\/AW3; AMS-220C; AMS-220CGS\/AMS-220CGB; AMS-224E\/IP-410; AMS-220C\/AMS-220P.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-wp0320501sc-washer-m3\"\u003eJUKI WP0320501SC Washer M3\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-ta1050504r0-rubber-plug\"\u003eJUKI TA1050504R0 Rubber Plug\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-ss1060210tp-screw-3-32-56-l-2-2\"\u003eJUKI SS1060210TP Screw 3\/32-56 L=2.2\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-sm4041001sc-screw-m4x0-7-l-10\"\u003eJUKI SM4041001SC Screw M4X0.7 L=10\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40014965-shuttle-w\"\u003eJUKI 40014965 Shuttle (W)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eI have the old number 40010499. Is this the right part?\u003c\/strong\u003e\u003cbr\u003eYes. JUKI lists NM6030001SC as the replacement for 40010499.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50580426358949,"sku":"JUK-NM6030001SC","price":0.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/nut_v2.png?v=1792234173"},{"product_id":"juki-22907703-presser-guide-bar","title":"JUKI 22907703 Presser Guide Bar","description":"\u003ch2\u003eJUKI 22907703 Presser Guide Bar\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 22907703: Presser Guide Bar for JUKI industrial sewing machines. It replaces the earlier JUKI part number B1510227000.\u003c\/p\u003e\n\u003cp\u003ePresser parts hold the fabric against the feed dog while the needle works.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e22907703\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Presser Guide Bar\u003c\/li\u003e\n\u003cli\u003eReplaces the earlier part number B1510227000\u003c\/li\u003e\n\u003cli\u003eListed in 70 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 22907703 is used on these JUKI machines: DDL-5530N Series; DDL-5550N Series; DDL-8500; DDL-8500-7; DDL-8300; DDL-8700 Series; DDL-8700-7; DDL-7000A-7; DDL-8000AS,AB; DDL-900B; DDL-900BB; DDL-5570N\/DDL-5580N Series; DLD-5430N\/DLD-5430N-7; DLN-5410N-7\/DLN-5410NH-7\/DLN-5410NJ-7; DLN-5410 Series; DLN-5410N Series; DDL-5571N\/DDL-5581N; DDL-5550N-7 Series; DDL-8000AP; DDL-5556N-7-WB; DMN-5420N-7; DLM-5400N-7 Series; DLM-5200N; DDL-8100e; DDL-8100B-7\/DDL-8100B-7R; DDL-8700B-7; DDL-8700A-7; DDL-900A; DLN-6390\/DLN-6390-7; DLM-5400NDD-7; DMN-5420NDD-7; DLN-5410NDD-7; LH-3128-7\/LH-3128; LH-3500A Series; LH-1152; LH-1152-4\/LH-1152-5\/LH-1152-6,LH-1152-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3168-7\/LH-3168; LH-3162-4\/LH-3162-7; LH-3178\/LH-3178-7; LH-3188\/LH-3188-7; LH-3182-4\/LH-3182-7; LH-3120; LH-3126F; LZ-2280B; LZ-2280A\/LZ-2280A-7 Series; LZ-2280N\/LZ-2280N-7\/LZ-2282N\/LZ-2282N-7\/LZ-2282NU-7\/LZ-2286NU-7\/LZ-2288NU-7; LZ-2290C; LZ-2280 Series; LZ-2280N\/LZ-2280N-7 Series; LZ-2290\/LZ-2290-7; LZ-2290A\/LZ-2290A-7\/LZ-2290A-SR-7; MH-380\/MH-382; MH-484\/S060_S061; MH-481; MH-481-4 Series\/MH-481-5 Series; MH-484-4\u0026amp;S060_PF-5\/MH-484-5\u0026amp;S060_PF-5; MP-200N; ML-111; AMS-205C\/206C; AMS-215C\/AMS-215P; AMS-220C; AMS-220C\/AMS-220P; DU-1181N; DU-1181N-7; DDL-5600NL-7\/DDL-5600NU-7\/DDL-5600NJ-7\/DDL-5600NR-7; DDL-5600NL\/DDL-5600NU\/DDL-5600NJ\/DDL-5600NR; DU-141H-7; DU-580; DU-141NH.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22907406-presser-spring\"\u003eJUKI 22907406 Presser Spring\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22931703-knee-lifter-push-rod\"\u003eJUKI 22931703 Knee Lifter Push Rod\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-ss2110920tp-screw-11-64-40-l-8-5\"\u003eJUKI SS2110920TP Screw 11\/64-40 L=8.5\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-ss8660610tp-screw-1-4-40-l-6\"\u003eJUKI SS8660610TP Screw 1\/4-40 L=6\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22923056-oil-pump-assembly\"\u003eJUKI 22923056 Oil Pump Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the Presser Guide Bar do?\u003c\/strong\u003e\u003cbr\u003ePresser parts hold the fabric against the feed dog while the needle works.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eI have the old number B1510227000. Is this the right part?\u003c\/strong\u003e\u003cbr\u003eYes. JUKI lists 22907703 as the replacement for B1510227000.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50580446707877,"sku":"JUK-22907703","price":1.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/presser_foot_v2.png?v=1792234173"},{"product_id":"juki-sm4041001sc-screw-m4x0-7-l-10","title":"JUKI SM4041001SC Screw M4X0.7 L=10","description":"\u003ch2\u003eJUKI SM4041001SC Screw M4X0.7 L=10\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part SM4041001SC: Screw M4X0.7 L=10 for JUKI industrial sewing machines.\u003c\/p\u003e\n\u003cp\u003eSmall fasteners like this are easy to lose or strip during service, so it is worth keeping spares on hand.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003eSM4041001SC\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Screw M4X0.7 L=10\u003c\/li\u003e\n\u003cli\u003eListed in 54 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart SM4041001SC is used on these JUKI machines: LH-3128-7\/LH-3128; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3168-7\/LH-3168; LH-3178\/LH-3178-7; LH-3188\/LH-3188-7; LH-3126F; LH-4128\/LH-4128-7\/LH-4168-7\/LH-4188-7; MO-6700DA; MO-6700D; MO-6700S; MO-6100D; MF-7800D; MF-7700D; MF-3620; MF-7200D; MF-7900DR-H24; MF-7700; MF-7800; LK-1903C\/BR35; LK-1903BN\/BR35; LK-1903AN\/BR35; LK-1903B\/BR35; LK-1903\/BR25; MB-377A,MB-373N\/BR10; LK-1903A\/BR35; LK-1851-555\/BR20; MOL-254; ASN-690\/SC-921; APW-895N; APW-896N; APW-895NE\/IP-420; AE-200AN; APW-895; ACF-164-373N; ACF-164-1851; FBS-340N\/FBS-340N-1; APW-896; APW-895L; ASN-690\/SC-510; AE-200A; APW-194N; APW-195N; APW-196N; ACF-164-1903; ACF-164-1800; AMS-251; AMS-224EN\/IP420; AMS-221RCHS; AMS-224EN4530R\/AW3; AMS-224E\/IP-410; AMS-224EN6060\/IP-420; AMS-224EN4530R; LU-2860V-7; LU-2828V-7.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-nm6030001sc-nut-m3x0-5-type1\"\u003eJUKI NM6030001SC Nut M3X0.5 TYPE1\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-wp0320501sc-washer-m3\"\u003eJUKI WP0320501SC Washer M3\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-12347308-screwdriver-small\"\u003eJUKI 12347308 Screwdriver (Small)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-ta1050504r0-rubber-plug\"\u003eJUKI TA1050504R0 Rubber Plug\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-b91210120a0-oiler-assembly\"\u003eJUKI B91210120A0 Oiler Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50580447887525,"sku":"JUK-SM4041001SC","price":1.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/screw_v2.png?v=1792234173"},{"product_id":"juki-22907802-hand-lifter","title":"JUKI 22907802 Hand Lifter","description":"\u003ch2\u003eJUKI 22907802 Hand Lifter\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 22907802: Hand Lifter. This is a part of the presser foot mechanism. In the official JUKI parts list it appears for DDL, DLN, DLD and other series machines. It replaces the earlier JUKI part number 11071800.\u003c\/p\u003e\n\u003cp\u003eThe presser bar, its cap and the lifters press the foot onto the fabric and raise it. Wear in these parts changes the pressure and the lift, and the fabric is no longer held evenly. The lifter raises the presser foot so that fabric can be placed or removed.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e22907802\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Hand Lifter\u003c\/li\u003e\n\u003cli\u003eType: Presser Parts\u003c\/li\u003e\n\u003cli\u003eReplaces the earlier part number 11071800\u003c\/li\u003e\n\u003cli\u003eListed in 88 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 22907802 is used on these JUKI machines: DDL-5530N Series; DDL-5550N Series; DDL-8500; DDL-8500-7; DDL-8300; DDL-8700 Series; DDL-8700-7; DDL-7000A-7; DDL-8000AS,AB; DDL-900B; DDL-900BB; DDL-9000B\/X73199; DDL-9000C-S; DLN-9010; DDL-5570N\/DDL-5580N Series; DLD-5430N\/DLD-5430N-7; DLN-5410N-7\/DLN-5410NH-7\/DLN-5410NJ-7; DLN-5410N Series; DLU-5490N-7 Series; DLU-5494N-7; DLU-5490N Series; DDL-5571N\/DDL-5581N; DDL-5550N-7 Series; DDL-9000A; DDL-8000AP; DDL-9000A\/PBN; DDL-5556N-7-WB; DDL-9000B; DMN-5420N-7; DLM-5400N-7 Series; DLM-5200N; DDL-8100e; DDL-8100B-7\/DDL-8100B-7R; DDL-8700B-7; DDL-8700A-7; DDL-900A; DDL-9000; DLN-6390\/DLN-6390-7; DLN-9010A; DLM-5400NDD-7; DMN-5420NDD-7; DLN-5410NDD-7; LH-3128-7\/LH-3128; LH-3500A Series; LH-1152; LH-1152-4\/LH-1152-5\/LH-1152-6,LH-1152-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7(for China); LH-3168-7\/LH-3168; LH-3162-4\/LH-3162-7; LH-3178\/LH-3178-7; LH-3188\/LH-3188-7; LH-3182-4\/LH-3182-7; LH-3120; LH-3126F; LH-4128\/LH-4128-7\/LH-4168-7\/LH-4188-7; LZ-2280B; LZ-2280A\/LZ-2280A-7 Series (For China); LZ-2280N\/LZ-2280N-7\/LZ-2282N\/LZ-2282N-7\/LZ-2282NU-7\/LZ-2286NU-7\/LZ-2288NU-7; LZ-2290C; LZ-2280 Series; LZ-2280N\/LZ-2280N-7 Series; LZ-2280A\/LZ-2280A-7 Series; LZ-2290\/LZ-2290-7; LZ-2290A\/LZ-2290A-7\/LZ-2290A-SR-7; MH-380\/MH-382; MH-484\/S060_S061; MH-481; MH-481-4 Series\/MH-481-5 Series; MH-484-4\u0026amp;S060_PF-5\/MH-484-5\u0026amp;S060_PF-5; MP-200N; ML-111; MOL-254N; MOL-254; AE-200AN; AE-200A; DU-1181N; DU-1181N-7; LZH-1290 Series; DDL-5600NL-7\/DDL-5600NU-7\/DDL-5600NJ-7\/DDL-5600NR-7; DDL-5600NL\/DDL-5600NU\/DDL-5600NJ\/DDL-5600NR; LU-2220N-7; LU-2212N-7\/2210N-6,-7\/2210W-6,-7\/2260N-7\/2260W-6,-7; LU-2216N-7\/LU-2266N-7; PLC-1690\/PLC-1691; PLC-1660\/PLC-1660-7\/PLC-1660L; PLC-1665; PLC-1610\/PLC-1610-7.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe foot does not press evenly or does not lift properly\u003c\/li\u003e\n\u003cli\u003ePlay, noise or a bent presser bar\u003c\/li\u003e\n\u003cli\u003eA lifter or stopper that no longer holds its position\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAfter installing, check the presser foot height, pressure and lift as described in the JUKI Engineer's Manual for your model. Switch the machine off and unplug it before you start, and turn the handwheel by hand through a full stitch before the first run.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003ePresser parts are specific to the machine.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22907406-presser-spring\"\u003eJUKI 22907406 Presser Spring\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-ss8660610tp-screw-1-4-40-l-6\"\u003eJUKI SS8660610TP Screw 1\/4-40 L=6\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-ro098240100-o-ring\"\u003eJUKI RO098240100 O-Ring\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-ss8681650tp-screw-9-32-28-l-16\"\u003eJUKI SS8681650TP Screw 9\/32-28 L=16\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-wp0501016sd-washer-5x10-5x1\"\u003eJUKI WP0501016SD Washer 5X10.5X1\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eI have the old number 11071800. Is this the right part?\u003c\/strong\u003e\u003cbr\u003eYes. JUKI lists 22907802 as the replacement for 11071800.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679066755237,"sku":"JUK-22907802","price":1.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/presser_foot_v2.png?v=1792234173"},{"product_id":"juki-b9117051000-bobbin","title":"JUKI B9117051000 Bobbin","description":"\u003ch2\u003eJUKI B9117051000 Bobbin\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part B9117051000: Bobbin. This is the spool that holds the bottom thread.\u003c\/p\u003e\n\u003cp\u003eThe bobbin sits in the bobbin case and feeds the bottom thread to the hook. Its size, flange shape and surface finish affect how smoothly the thread unwinds and therefore the stitch.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003eB9117051000\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Bobbin\u003c\/li\u003e\n\u003cli\u003eType: Bobbin\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eJUKI lists this part under the number above, but we do not show a list of machines for it yet.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDents, bent flanges or burrs that catch the thread\u003c\/li\u003e\n\u003cli\u003eThe bobbin wobbles or does not turn freely in the case\u003c\/li\u003e\n\u003cli\u003eUneven winding, or thread that jumps off the bobbin\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWind the bobbin evenly and do not overfill it. Discard bobbins that are dented or bent.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eBobbins are made in specific sizes and designs for each hook and bobbin case.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679079239845,"sku":"JUK-B9117051000","price":2.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/bobbin_v2.png?v=1792234173"},{"product_id":"juki-ss6153040sp-screw-15-64-28-l-30","title":"JUKI SS6153040SP Screw 15\/64-28 L=30","description":"\u003ch2\u003eJUKI SS6153040SP Screw 15\/64-28 L=30\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part SS6153040SP: Screw 15\/64-28 L=30. This is a small fastener that holds parts of the machine together or locks an adjustment. In the official JUKI parts list it appears for LH, LBH, LK and other series machines.\u003c\/p\u003e\n\u003cp\u003eScrews on a sewing machine live with vibration, oil and repeated service. Heads get stripped and threads wear, and one wrong screw can damage a casting or the part it holds, so the exact JUKI number matters.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003eSS6153040SP\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Screw 15\/64-28 L=30\u003c\/li\u003e\n\u003cli\u003eType: Screws\u003c\/li\u003e\n\u003cli\u003eThread: 15\/64-28 (inch)\u003c\/li\u003e\n\u003cli\u003eLength (L): 30 mm\u003c\/li\u003e\n\u003cli\u003eListed in 43 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart SS6153040SP is used on these JUKI machines: LH-3128-7\/LH-3128; LH-3500A Series; LH-1152; LH-1152-4\/LH-1152-5\/LH-1152-6,LH-1152-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7(for China); LH-3168-7\/LH-3168; LH-3162-4\/LH-3162-7; LH-3178\/LH-3178-7; LH-3188\/LH-3188-7; LH-3182-4\/LH-3182-7; LH-3120; LH-3126F; LH-4128\/LH-4128-7\/LH-4168-7\/LH-4188-7; LBH-781\/LBH-782\/LBH-783\/LBH-784\/LBH-781-K\/LBH-782-K\/LBH-783-K\/LBH-784-K; LK-1952\/LK-1953\/LK-1954; APW-194N; APW-195N; APW-196N; AMS-215C\/AMS-215P; AMS-223C; AMS-224C; DNU-1541\/DNU-1541H\/DNU-1541S; LU-1520NCS-7; LZH-1290 Series; LG-158\/LG-158-1; LU-1560N\/LU-1560N-7; LU-1565N; LU-1520N-7\/LU-1521N-7; LU-1508N\/LU-1508NH; LU-1510N-7\/LU-1510NA-7; LU-1561N\/LU-1561N-7; LU-1509N\/LU-1509NH\/LU-1511N-7; LU-1510N; LU-562N\/LU-563N; LU-1508\/LU-1508H; LU-1510,1510-7; LU-1560\/LU-1560-7; DNU-1541-7; LS-1340\/LS-1341; LS-1342\/LS-1342-7; PLC-1710\/PLC-1760\/PLC-1760L; PLC-1710-7\/PLC-1760-7.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe screwdriver slips in the head, or the head is stripped or rounded\u003c\/li\u003e\n\u003cli\u003eThe thread is damaged or the screw no longer holds its setting\u003c\/li\u003e\n\u003cli\u003eThe screw is bent or rusted, or was lost during service\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eClean the thread and the hole before installing. Tighten firmly but do not over-tighten, and do not force a screw that does not start smoothly.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eJUKI small screws come in many thread sizes and lengths that look almost the same. Thread size and length are part of the JUKI number, so match the number rather than the look.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-21388004-reverse-feed-rock-shaft\"\u003eJUKI 21388004 Reverse Feed Rock Shaft\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-21351150-belt-cover-assembly-right\"\u003eJUKI 21351150 Belt Cover Assembly (Right)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-21351200-belt-cover-left\"\u003eJUKI 21351200 Belt Cover (Left)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-21355755-lower-thread-guide-assembly\"\u003eJUKI 21355755 Lower Thread Guide Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-21336805-feed-dial-a\"\u003eJUKI 21336805 Feed Dial A\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use a similar screw from a hardware store?\u003c\/strong\u003e\u003cbr\u003eWe do not recommend it. Sewing machine screws use their own thread sizes and head shapes, and a wrong thread can strip the hole in the casting.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679085105317,"sku":"JUK-SS6153040SP","price":2.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/screw_v2.png?v=1792234173"},{"product_id":"juki-wp0501016sd-washer-5x10-5x1","title":"JUKI WP0501016SD Washer 5X10.5X1","description":"\u003ch2\u003eJUKI WP0501016SD Washer 5X10.5X1\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part WP0501016SD: Washer 5X10.5X1. This is a small fastening part that locks, spaces or retains another part. In the official JUKI parts list it appears for DDL, DLN, DLD and other series machines.\u003c\/p\u003e\n\u003cp\u003eNuts, washers and rings keep adjustments from moving and hold shafts and pins in place. When they wear or deform they stop holding, which shows up as play, noise or an adjustment that will not stay set.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003eWP0501016SD\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Washer 5X10.5X1\u003c\/li\u003e\n\u003cli\u003eType: Nuts \u0026amp; Washers\u003c\/li\u003e\n\u003cli\u003eListed in 78 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart WP0501016SD is used on these JUKI machines: DDL-5530N Series; DDL-5550N Series; DDL-8500; DDL-8500-7; DDL-8300; DDL-8700 Series; DDL-8700-7; DDL-8000AS,AB; DDL-900B; DDL-900BB; DDL-9000B\/X73199; DDL-9000C-S; DDL-9000C-F; DLN-9010; DLD-5430N\/DLD-5430N-7; DLN-5410N-7\/DLN-5410NH-7\/DLN-5410NJ-7; DLN-5410 Series; DLN-5410N Series; DDL-5571N\/DDL-5581N; DDL-5550N-7 Series; DDL-8000AP; DDL-9000A\/PBN; DDL-5556N-7-WB; DDL-9000B; DMN-5420N-7; DLM-5400N-7 Series; DLM-5200N; DDL-8100e; DDL-900A; DDL-9000; DLN-6390\/DLN-6390-7; DLN-9010A; DLM-5400NDD-7; DMN-5420NDD-7; LH-3128-7\/LH-3128; LH-4500C; LH-3500A Series; LH-1152-4\/LH-1152-5\/LH-1152-6,LH-1152-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7(for China); LH-3168-7\/LH-3168; LH-3162-4\/LH-3162-7; LH-3178\/LH-3178-7; LH-3188\/LH-3188-7; LH-3182-4\/LH-3182-7; LH-3120; LH-3126F; MO-6100D; LZ-2280A\/LZ-2280A-7 Series (For China); LZ-2280N\/LZ-2280N-7\/LZ-2282N\/LZ-2282N-7\/LZ-2282NU-7\/LZ-2286NU-7\/LZ-2288NU-7; LZ-2290C; LZ-271\/LZ-391N; LZ-2280 Series; LZ-2280N\/LZ-2280N-7 Series; LZ-2280A\/LZ-2280A-7 Series; LZ-2288; LZ-2290\/LZ-2290-7; LZ-2290A\/LZ-2290A-7\/LZ-2290A-SR-7; MF-7500 Series; MH-484\/S060_S061; MH-481; MH-486-4\/MH-486-5; MH-481-4 Series\/MH-481-5 Series; MH-484-4\u0026amp;S060_PF-5\/MH-484-5\u0026amp;S060_PF-5; LK-1903C\/BR35; MB-1800 Series; LK-1903BN\/BR35; MB-1373\/MB-1377; LK-1903AN\/BR35; LK-1903B\/BR35; LK-1903\/BR25; MB-373NS\/MB-377NS; MB-377A,MB-373N\/BR10; LK-1903A\/BR35; LBH-781\/LBH-782\/LBH-783\/LBH-784\/LBH-781-K\/LBH-782-K\/LBH-783-K\/LBH-784-K; LBH-791NS\/LBH-791NS-1 Series; LBH-770NV\/LBH-NB-1 Series\/LBH-780NV\/LBH-780NB-1 Series; LBH-1700 Series.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe nut or ring no longer grips and a setting keeps moving\u003c\/li\u003e\n\u003cli\u003eThreads are damaged, or the washer or ring is bent or worn thin\u003c\/li\u003e\n\u003cli\u003eThe part was lost or distorted during service\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInstall it in the same position and order as the one you remove, and do not reuse a ring that has been bent open.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eThread size, thickness and outer diameter are part of the JUKI number, so match the number.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22907802-hand-lifter\"\u003eJUKI 22907802 Hand Lifter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-ss8660610tp-screw-1-4-40-l-6\"\u003eJUKI SS8660610TP Screw 1\/4-40 L=6\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22907406-presser-spring\"\u003eJUKI 22907406 Presser Spring\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22907703-presser-guide-bar\"\u003eJUKI 22907703 Presser Guide Bar\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22932453-bracket-assembly\"\u003eJUKI 22932453 Bracket Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I replace it with a standard hardware-store part?\u003c\/strong\u003e\u003cbr\u003eSizes on sewing machines are often non-standard, so we recommend the exact JUKI part.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679085138085,"sku":"JUK-WP0501016SD","price":0.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/nut_v2.png?v=1792234173"},{"product_id":"juki-22827257-bobbin-case-assembly","title":"JUKI 22827257 Bobbin Case Assembly","description":"\u003ch2\u003eJUKI 22827257 Bobbin Case Assembly\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 22827257: Bobbin Case Assembly. This is the case that holds the bobbin inside the hook and applies tension to the bottom thread. In the official JUKI parts list it appears for LH series machines.\u003c\/p\u003e\n\u003cp\u003eThe tension spring and screw in the case decide how freely the bobbin thread unwinds, so the bobbin case is directly involved in stitch balance.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e22827257\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Bobbin Case Assembly\u003c\/li\u003e\n\u003cli\u003eType: Bobbin Case\u003c\/li\u003e\n\u003cli\u003eListed in 6 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 22827257 is used on these JUKI machines: LH-3500A Series; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7(for China); LH-3188\/LH-3188-7; LH-3182-4\/LH-3182-7; LH-4128\/LH-4128-7\/LH-4168-7\/LH-4188-7.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBottom thread tension is uneven or cannot be set correctly\u003c\/li\u003e\n\u003cli\u003eThread nests or snags in the case\u003c\/li\u003e\n\u003cli\u003eThe case or its tension spring is burred, dented or worn\u003c\/li\u003e\n\u003cli\u003eThe bobbin does not sit or turn smoothly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKeep the case free of lint and thread ends, and adjust the tension to the thread you are sewing with.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eBobbin cases are made for a specific hook and bobbin size, and there are versions with extra features, for example a spring that stops the bobbin from spinning on after the machine stops.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22817050-presser-foot-assembly-d-2-4-3-8\"\u003eJUKI 22817050 Presser Foot Assembly D=2.4 (3\/8)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40025236-slide-plate-assembly-r-b\"\u003eJUKI 40025236 Slide Plate Assembly R-B\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40025248-slide-plate-assembly-l-b\"\u003eJUKI 40025248 Slide Plate Assembly L-B\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-10228856-needle-clamp-assembly-left-5-8\"\u003eJUKI 10228856 Needle Clamp Assembly Left 5\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-10228864-needle-clamp-assembly-right-5-8\"\u003eJUKI 10228864 Needle Clamp Assembly Right 5\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use a bobbin case from another machine?\u003c\/strong\u003e\u003cbr\u003eOnly if it has the same JUKI part number. A case for a different hook size will not seat or hold tension correctly.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679597727909,"sku":"JUK-22827257","price":143.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/bobbin_case_v2.png?v=1792234173"},{"product_id":"juki-22932453-bracket-assembly","title":"JUKI 22932453 Bracket Assembly","description":"\u003ch2\u003eJUKI 22932453 Bracket Assembly\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 22932453: Bracket Assembly. This is a mechanical part of the machine. In the official JUKI parts list it appears for DDL, DX, DLN and other series machines. It replaces the earlier JUKI part number 11024510.\u003c\/p\u003e\n\u003cp\u003eThis part is listed by JUKI under its own part number and has one fixed place in the machine. Check the part number against your machine's parts list before you order.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e22932453\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Bracket Assembly\u003c\/li\u003e\n\u003cli\u003eType: Machine Parts\u003c\/li\u003e\n\u003cli\u003eReplaces the earlier part number 11024510\u003c\/li\u003e\n\u003cli\u003eReplaces the earlier part number 11024502\u003c\/li\u003e\n\u003cli\u003eReplaces the earlier part number B3433141H0A\u003c\/li\u003e\n\u003cli\u003eReplaces the earlier part number 22932404\u003c\/li\u003e\n\u003cli\u003eListed in 111 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 22932453 is used on these JUKI machines: DDL-5530N Series; DDL-5550N Series; DDL-8500; DDL-8500-7; DDL-8300; DDL-8700 Series; DDL-8700-7; DDL-7000A-7; DX-01; DDL-8000AS,AB; DDL-900B; DDL-900BB; DDL-9000B\/X73199; DDL-9000C-S; DDL-9000C-F; DLN-9010; DDL-5570N\/DDL-5580N Series; DLN-5410 Series; DDL-5571N\/DDL-5581N; DDL-5550N-7 Series; DDL-9000A; DDL-9000A\/PBN; DDL-5556N-7-WB; DDL-9000B; DMN-5420N-7; DLM-5400N-7 Series; DLM-5200N; DDL-8100e; DDL-8100B-7\/DDL-8100B-7R; DDL-8700B-7; DDL-8700A-7; DDL-900A; DDL-9000; DLN-6390\/DLN-6390-7; DLN-9010A; DLN-5410NDD-7; LH-3128-7\/LH-3128; LH-4500C; LH-3500A Series; LH-1152; LH-1152-4\/LH-1152-5\/LH-1152-6,LH-1152-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7(for China); LH-3168-7\/LH-3168; LH-3162-4\/LH-3162-7; LH-3178\/LH-3178-7; LH-3188\/LH-3188-7; LH-3182-4\/LH-3182-7; LH-3120; LH-3126F; LH-4128\/LH-4128-7\/LH-4168-7\/LH-4188-7; LZ-2280B; LZ-2280A\/LZ-2280A-7 Series (For China); LZ-2280N\/LZ-2280N-7\/LZ-2282N\/LZ-2282N-7\/LZ-2282NU-7\/LZ-2286NU-7\/LZ-2288NU-7; LZ-2290C; LZ-2280 Series; LZ-2280N\/LZ-2280N-7 Series; LZ-2280A\/LZ-2280A-7 Series; LZ-2290\/LZ-2290-7; LZ-2290A\/LZ-2290A-7\/LZ-2290A-SR-7; MS-1190\/MS-1190M; MS-1261\/MS-1261M\/V045; MS-1261\/MS-1261M; MH-380\/MH-382; MH-484\/S060_S061; MH-481; MH-486-4\/MH-486-5; MH-481-4 Series\/MH-481-5 Series; MH-484-4\u0026amp;S060_PF-5\/MH-484-5\u0026amp;S060_PF-5; MP-200N; ML-111; FLS-351N; FLS-350NA; FLS-350NA・NB,351NA; AW-2; DNU-1541\/DNU-1541H\/DNU-1541S; DU-1181N; DU-1181N-7; LU-2800 Series; LU-1560N\/LU-1560N-7; DU-140; LU-1565N; DU-141H-7; LU-1508N\/LU-1508NH; LU-1561N\/LU-1561N-7; LU-1509N\/LU-1509NH\/LU-1511N-7; LU-1510N; DU-580; DU-141NH; LU-1508\/LU-1508H; LU-1510,1510-7; LU-1560\/LU-1560-7; DNU-1541-7; LS-1340\/LS-1341; LS-1342\/LS-1342-7; DSC-245,-4,-7; DSC-246\/DSC-246-4,-7; DSU-142\/DSU-142-4,-7; DSU-144-4,-7; DSC-244V\/DSC-244V-4\/DSC-244V-6; DSC-244\/DSC-244-4\/DSC-244-6; DSC-245V-4,-7; DSU-144N; LS-341N\/LS-341N-7; LS-2342\/LS-2342-7; DSU-145\/145-4\/145-7; PLC-2700 Series; PLC-1690\/PLC-1691; PLC-1710\/PLC-1760\/PLC-1760L; PLH-981,982; PLN-985,986.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePlay, noise or a function that has stopped working correctly\u003c\/li\u003e\n\u003cli\u003eA visible crack, bend, wear or breakage\u003c\/li\u003e\n\u003cli\u003eA part that was lost during service\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInstall it in the same position and with the same fasteners as the original, and recheck the related adjustment.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eMachine parts are specific to the model.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-ss2110920tp-screw-11-64-40-l-8-5\"\u003eJUKI SS2110920TP Screw 11\/64-40 L=8.5\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22907802-hand-lifter\"\u003eJUKI 22907802 Hand Lifter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22907703-presser-guide-bar\"\u003eJUKI 22907703 Presser Guide Bar\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-ss8151550sp-screw-15-64-28-l-15\"\u003eJUKI SS8151550SP Screw 15\/64-28 L=15\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22958300-needle-thread-guide-pin\"\u003eJUKI 22958300 Needle Thread Guide Pin\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eI have the old number 11024510. Is this the right part?\u003c\/strong\u003e\u003cbr\u003eYes. JUKI lists 22932453 as the replacement for 11024510.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679597924517,"sku":"JUK-22932453","price":14.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/generic_v2.png?v=1792234173"},{"product_id":"juki-40006323-juki-grease-a-tube","title":"JUKI 40006323 JUKI Grease A Tube","description":"\u003ch2\u003eJUKI 40006323 JUKI Grease A Tube\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 40006323: JUKI Grease A Tube. This is JUKI grease for the lubrication points named in your machine's manual. In the official JUKI parts list it appears for DDL, DP, AK and other series machines.\u003c\/p\u003e\n\u003cp\u003eGrease is used at the lubrication points where oil would not stay, as your machine's manual names them.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e40006323\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: JUKI Grease A Tube\u003c\/li\u003e\n\u003cli\u003eType: Tools \u0026amp; Supplies\u003c\/li\u003e\n\u003cli\u003eListed in 58 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 40006323 is used on these JUKI machines: DDL-8000AS,AB; DDL-9000B\/X73199; DP-2100; DDL-9000A; DDL-9000B; AK-141; DLN-6390\/DLN-6390-7; LH-4500C; LH-3500A Series; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7(for China); LH-4128\/LH-4128-7\/LH-4168-7\/LH-4188-7; LZ-2290C; LZ-2290A\/LZ-2290A-7\/LZ-2290A-SR-7; MB-1800 Series; LBH-1790S; LBH-1790 Series; LBH-1790A\/LBH-1795A; LBH-1796A; LBH-1790AN,LBH-1795AN; LBH-1796AN; LK-1900C; LK-1900BN Series; LK-1900B Series; LK-1900S Series; AMS-221F; APW-895N; APW-896N; APW-895NE\/IP-420; APW-895; APW-896; APW-895L; AC-172N-1790AN; AB-1351; AC-172N-1790; ACF-172-1790; AMB-289; AK-157; AK-154; AMS-251; NA-P1510,NA-P2210; AMS-210EN Series; AMS-221EN\/IP-420; AMS-224EN\/IP420; AMS-221RCHS; AMS-221ENTS-3020; AMS-224EN4530R\/AW3; NA-P3020; AMS-221FR\/AW3; AMS-224E\/IP-410; AMS-224EN6060\/IP-420; AMS-224EN4530R; AMS-210ENHL2210\/TF10S; AB-1360; LU-2800 Series; LU-2810ES-7,LU-2818ES-7; LS-2342\/LS-2342-7; PLC-2700 Series.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eBefore you use it\u003c\/h3\u003e\n\u003cp\u003eUse it only at the points the manual names, in small amounts, and wipe off any excess.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eUse the lubricant the manual of your machine calls for.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-26261503-bobbin-winder-wheel-rubber\"\u003eJUKI 26261503 Bobbin Winder Wheel Rubber\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-23630106-tube-b\"\u003eJUKI 23630106 Tube B\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-sm4051255sp-screw\"\u003eJUKI SM4051255SP Screw\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40086358-wiper-driving-shaft-assembly\"\u003eJUKI 40086358 Wiper Driving Shaft Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-ta1050504r0-rubber-plug\"\u003eJUKI TA1050504R0 Rubber Plug\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679600414885,"sku":"JUK-40006323","price":14.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/tool_v2.png?v=1792234173"},{"product_id":"juki-40025236-slide-plate-assembly-r-b","title":"JUKI 40025236 Slide Plate Assembly R-B","description":"\u003ch2\u003eJUKI 40025236 Slide Plate Assembly R-B\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 40025236: Slide Plate Assembly R-B. This is a plate or slide of the machine bed or head. In the official JUKI parts list it appears for LH series machines.\u003c\/p\u003e\n\u003cp\u003eSlide plates, guide plates and fixed plates close or guide parts of the bed and the bobbin area. They can be bent, worn or lost during service.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e40025236\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Assembly Slide Plate-R-B\u003c\/li\u003e\n\u003cli\u003eType: Plates\u003c\/li\u003e\n\u003cli\u003eListed in 4 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 40025236 is used on these JUKI machines: LH-3500A Series; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7(for China); LH-4128\/LH-4128-7\/LH-4168-7\/LH-4188-7.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe plate is bent, scratched or does not sit flush\u003c\/li\u003e\n\u003cli\u003eIt rattles, catches the thread or hinders the movement of a neighboring part\u003c\/li\u003e\n\u003cli\u003eWorn edges or damaged locating pins\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFit it flush with the surface around it so that the thread and the fabric do not catch on its edge.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003ePlates are specific to the machine, and many are made for the left or right side.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-10228856-needle-clamp-assembly-left-5-8\"\u003eJUKI 10228856 Needle Clamp Assembly Left 5\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-10228864-needle-clamp-assembly-right-5-8\"\u003eJUKI 10228864 Needle Clamp Assembly Right 5\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40025495-throat-plate-trim-3-8\"\u003eJUKI 40025495 Throat Plate Trim 3\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40025499-throat-plate-trim-5-8\"\u003eJUKI 40025499 Throat Plate Trim 5\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40035893-feed-dog-type-7g-3-8\"\u003eJUKI 40035893 Feed Dog Type 7G 3\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679600513189,"sku":"JUK-40025236","price":13.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/slide_plate_v2.png?v=1792234173"},{"product_id":"juki-40025248-slide-plate-assembly-l-b","title":"JUKI 40025248 Slide Plate Assembly L-B","description":"\u003ch2\u003eJUKI 40025248 Slide Plate Assembly L-B\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 40025248: Slide Plate Assembly L-B. This is a plate or slide of the machine bed or head. In the official JUKI parts list it appears for LH series machines.\u003c\/p\u003e\n\u003cp\u003eSlide plates, guide plates and fixed plates close or guide parts of the bed and the bobbin area. They can be bent, worn or lost during service.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e40025248\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Assembly Slide Plate-L-B\u003c\/li\u003e\n\u003cli\u003eType: Plates\u003c\/li\u003e\n\u003cli\u003eListed in 4 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 40025248 is used on these JUKI machines: LH-3500A Series; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7(for China); LH-4128\/LH-4128-7\/LH-4168-7\/LH-4188-7.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe plate is bent, scratched or does not sit flush\u003c\/li\u003e\n\u003cli\u003eIt rattles, catches the thread or hinders the movement of a neighboring part\u003c\/li\u003e\n\u003cli\u003eWorn edges or damaged locating pins\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFit it flush with the surface around it so that the thread and the fabric do not catch on its edge.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003ePlates are specific to the machine, and many are made for the left or right side.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-10228856-needle-clamp-assembly-left-5-8\"\u003eJUKI 10228856 Needle Clamp Assembly Left 5\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-10228864-needle-clamp-assembly-right-5-8\"\u003eJUKI 10228864 Needle Clamp Assembly Right 5\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40025495-throat-plate-trim-3-8\"\u003eJUKI 40025495 Throat Plate Trim 3\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40025499-throat-plate-trim-5-8\"\u003eJUKI 40025499 Throat Plate Trim 5\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40035893-feed-dog-type-7g-3-8\"\u003eJUKI 40035893 Feed Dog Type 7G 3\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679600545957,"sku":"JUK-40025248","price":15.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/slide_plate_v2.png?v=1792234173"},{"product_id":"juki-b1613512f0h-feed-dog-1-4","title":"JUKI B1613512F0H Feed Dog 1\/4","description":"\u003ch2\u003eJUKI B1613512F0H Feed Dog 1\/4\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part B1613512F0H: Feed Dog 1\/4. This is the toothed plate under the throat plate that moves the fabric from stitch to stitch. In the official JUKI parts list it appears for LH series machines.\u003c\/p\u003e\n\u003cp\u003eWith every stitch the feed dog rises through the slots of the throat plate, grips the fabric against the presser foot, moves it forward by one stitch length and drops below the plate again. Tooth pattern and size decide how well it grips and how evenly the fabric travels.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003eB1613512F0H\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Feed Dog 1\/4\u003c\/li\u003e\n\u003cli\u003eType: Feed Dogs\u003c\/li\u003e\n\u003cli\u003eSize mark in the JUKI name: 1\/4\u003c\/li\u003e\n\u003cli\u003eListed in 6 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart B1613512F0H is used on these JUKI machines: LH-3128-7\/LH-3128; LH-3500A Series; LH-1152; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7(for China); LH-3168-7\/LH-3168.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFabric slips or feeds unevenly and the stitch length varies\u003c\/li\u003e\n\u003cli\u003eThe teeth are flattened, rounded or burred and no longer grip\u003c\/li\u003e\n\u003cli\u003eThe fabric is marked or snagged along the feed path\u003c\/li\u003e\n\u003cli\u003eThe feed dog is bent or touches the throat plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eReplace the feed dog together with the throat plate when both are worn, and set the feed dog height as given in the JUKI Engineer's Manual for your model. Switch the machine off and unplug it before you start, and turn the handwheel by hand through a full stitch before the first run.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eFeed dogs differ by machine model, tooth pattern and size. On twin-needle machines a size such as 3\/8 or 1\/2 in the name is the needle gauge, and it must match your throat plate, needle clamps and presser foot. Where the name carries a type mark such as AA or 7G, keep the same one.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22638456-presser-foot-assembly\"\u003eJUKI 22638456 Presser Foot Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-10148351-needle-clamp-assembly-3-8\"\u003eJUKI 10148351 Needle Clamp Assembly 3\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22625800-throat-plate-3-8-9-5-mm\"\u003eJUKI 22625800 Throat Plate 3\/8 (9.5 mm)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22626006-throat-plate-1-2-12-7-mm\"\u003eJUKI 22626006 Throat Plate 1\/2 (12.7 mm)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-10148559-needle-clamp-assembly-1-2\"\u003eJUKI 10148559 Needle Clamp Assembly 1\/2\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to replace the throat plate as well?\u003c\/strong\u003e\u003cbr\u003eNot always, but a worn feed dog and a worn throat plate usually go together. If the slots in the plate are rough or burred, or the needle hole is damaged, replace both for a clean feed.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679623450789,"sku":"JUK-B1613512F0H","price":92.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/feed_dog_v2.png?v=1792234173"},{"product_id":"juki-sm4051255sp-screw","title":"JUKI SM4051255SP Screw","description":"\u003ch2\u003eJUKI SM4051255SP Screw\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part SM4051255SP: Screw. This is a small fastener that holds parts of the machine together or locks an adjustment. In the official JUKI parts list it appears for DX, DDL, LH and other series machines.\u003c\/p\u003e\n\u003cp\u003eScrews on a sewing machine live with vibration, oil and repeated service. Heads get stripped and threads wear, and one wrong screw can damage a casting or the part it holds, so the exact JUKI number matters.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003eSM4051255SP\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Screw M5 L=12\u003c\/li\u003e\n\u003cli\u003eType: Screws\u003c\/li\u003e\n\u003cli\u003eListed in 80 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart SM4051255SP is used on these JUKI machines: DX-01; DDL-9000B\/X73199; DDL-9000C-S; DDL-9000C-F; DDL-9000A\/PBN; DDL-9000B; LH-4500C; LH-3500A Series; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7(for China); LH-4128\/LH-4128-7\/LH-4168-7\/LH-4188-7; MO-6700DA-0E4\/MO-6714DA-BE6\/MO-6716DA-DE4; MO-6700D; MO-3900\/MO-3904\/MO-3914\/MO-3916; MOC-3904\/MOC-3914; MO-3604\/MO-3616; MOR-3900; MOF-3900; MOJ-3900; MOG-3700; MO-6700S-0E4\/MO-6714S-BE\/MO-6716S-DE4; MO-6904S-0E4\/MO-6914S-BE6\/MO-6916S-DE; MO-6904R-0E4\/MO-6914R-BE6\/MO-6916R-DE4; MO-6700S Series; MO-6100D; MO-6904C-0E6\/MO-6914C-BE6; MO-6904G-0F6\/MO-6914G-CH6\/MO-6916G-FH6; MO-6904J-0F6\/MO-6914J-CH6\/MO-6916J-FH6; LZ-2290C; LZ-2290\/LZ-2290-7; LZ-2290A\/LZ-2290A-7\/LZ-2290A-SR-7; MF-7500 Series; MF-7800D; MF-7700D; MF-3620; MF-7200D; MF-7900 Series; MF-7500D Series; MF-7900D Series; MF-7900-E11; MF-7700; MF-7800; MS-1261A; MEB-3810; MEB-3810N; MEB3900; LK-1900C; AMS-221F; ASN-690\/SC-921; APW-895N; APW-896N; APW-895NE\/IP-420; APW-895; APW-896; APW-895L; ASN-690\/SC-510; AK-154; AMS-221EN\/IP-420; AMS-224EN\/IP420; AMS-221RCHS; AMS-221ENTS-3020; AMS-224EN4530R\/AW3; AMS-221E\/IP-410; AMS-221FR\/AW3; AMS-224E\/IP-410; AMS-224EN4530R; LU-2828-6\/LU-2828-7; LU-2800 Series; LU-2810ES-7,LU-2818ES-7; LU-2828ES-7; LU-2810-6,2860-6; LS-2342\/LS-2342-7; PLC-2700 Series; SC-921(For China); SC-920; SC-920 (For China); SC-921; CP-170; IP-110 TYPE-F; CP-180.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe screwdriver slips in the head, or the head is stripped or rounded\u003c\/li\u003e\n\u003cli\u003eThe thread is damaged or the screw no longer holds its setting\u003c\/li\u003e\n\u003cli\u003eThe screw is bent or rusted, or was lost during service\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eClean the thread and the hole before installing. Tighten firmly but do not over-tighten, and do not force a screw that does not start smoothly.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eJUKI small screws come in many thread sizes and lengths that look almost the same. Thread size and length are part of the JUKI number, so match the number rather than the look.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-23630106-tube-b\"\u003eJUKI 23630106 Tube B\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-11565504-upper-knife-presser-plate\"\u003eJUKI 11565504 Upper Knife Presser Plate\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-11565702-washer\"\u003eJUKI 11565702 Washer\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-13102900-large-thread-guide\"\u003eJUKI 13102900 Large Thread Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40006323-juki-grease-a-tube\"\u003eJUKI 40006323 JUKI Grease A Tube\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use a similar screw from a hardware store?\u003c\/strong\u003e\u003cbr\u003eWe do not recommend it. Sewing machine screws use their own thread sizes and head shapes, and a wrong thread can strip the hole in the casting.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679645208741,"sku":"JUK-SM4051255SP","price":0.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/screw_v2.png?v=1792234173"},{"product_id":"juki-ss7110840sp-screw-11-64-40-l-7-8","title":"JUKI SS7110840SP Screw 11\/64-40 L=7.8","description":"\u003ch2\u003eJUKI SS7110840SP Screw 11\/64-40 L=7.8\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part SS7110840SP: Screw 11\/64-40 L=7.8. This is a small fastener that holds parts of the machine together or locks an adjustment. In the official JUKI parts list it appears for DLN, DDL, LH and other series machines.\u003c\/p\u003e\n\u003cp\u003eScrews on a sewing machine live with vibration, oil and repeated service. Heads get stripped and threads wear, and one wrong screw can damage a casting or the part it holds, so the exact JUKI number matters.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003eSS7110840SP\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Screw 11\/64-40 L=7.8\u003c\/li\u003e\n\u003cli\u003eType: Screws\u003c\/li\u003e\n\u003cli\u003eThread: 11\/64-40 (inch)\u003c\/li\u003e\n\u003cli\u003eLength (L): 7.8 mm\u003c\/li\u003e\n\u003cli\u003eListed in 54 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart SS7110840SP is used on these JUKI machines: DLN-5410 Series; DDL-5556N-7-WB; LH-3128-7\/LH-3128; LH-1152; LH-1152-4\/LH-1152-5\/LH-1152-6,LH-1152-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7(for China); LH-3168-7\/LH-3168; LH-3162-4\/LH-3162-7; LH-3178\/LH-3178-7; LH-3188\/LH-3188-7; LH-3182-4\/LH-3182-7; LH-3120; LH-3126F; MO-6700DA-0E4\/MO-6714DA-BE6\/MO-6716DA-DE4; MO-6700DA SUBCLASSES; MO-6700D; MO-3900\/MO-3904\/MO-3914\/MO-3916; MOC-3904\/MOC-3914; MO-3704E\/MO-3714E\/MO-3716E; MO-3604\/MO-3616; MOR-3900; MOF-3900; MOJ-3900; MOG-3700; MOG-3700 SUBCLASSES; MO-6716 Subclasses; MO-6700S Subclasses; MO-6700S-0E4\/MO-6714S-BE\/MO-6716S-DE4; MO-6904S-0E4\/MO-6914S-BE6\/MO-6916S-DE; MO-6904R-0E4\/MO-6914R-BE6\/MO-6916R-DE4; MO-6700S Series; MO-6100D; MO-6904C-0E6\/MO-6914C-BE6; MO-6904G-0F6\/MO-6914G-CH6\/MO-6916G-FH6; MO-6900G SUBCLASSES; MO-6904J-0F6\/MO-6914J-CH6\/MO-6916J-FH6; LZ-2280B; LZ-2280N\/LZ-2280N-7\/LZ-2282N\/LZ-2282N-7\/LZ-2282NU-7\/LZ-2286NU-7\/LZ-2288NU-7; LZ-2280 Series; LZ-2280N\/LZ-2280N-7 Series; LZ-2290A\/LZ-2290A-7\/LZ-2290A-SR-7; MS-1261A; MS-1190\/MS-1190M; MS-1261\/MS-1261M\/V045; MS-1261\/MS-1261M; MH-486-4\/MH-486-5; MH-481-4 Series\/MH-481-5 Series; MH-484-4\u0026amp;S060_PF-5\/MH-484-5\u0026amp;S060_PF-5; MS-3580 Series; MB-1800 Series; LK-1903\/BR25; MB-373NS\/MB-377NS; MB-377A,MB-373N\/BR10.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe screwdriver slips in the head, or the head is stripped or rounded\u003c\/li\u003e\n\u003cli\u003eThe thread is damaged or the screw no longer holds its setting\u003c\/li\u003e\n\u003cli\u003eThe screw is bent or rusted, or was lost during service\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eClean the thread and the hole before installing. Tighten firmly but do not over-tighten, and do not force a screw that does not start smoothly.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eJUKI small screws come in many thread sizes and lengths that look almost the same. Thread size and length are part of the JUKI number, so match the number rather than the look.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-13102900-large-thread-guide\"\u003eJUKI 13102900 Large Thread Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-13143300-oil-gauge\"\u003eJUKI 13143300 Oil Gauge\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-11565504-upper-knife-presser-plate\"\u003eJUKI 11565504 Upper Knife Presser Plate\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-11565702-washer\"\u003eJUKI 11565702 Washer\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-13102603-oil-reservoir-gasket\"\u003eJUKI 13102603 Oil Reservoir Gasket\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use a similar screw from a hardware store?\u003c\/strong\u003e\u003cbr\u003eWe do not recommend it. Sewing machine screws use their own thread sizes and head shapes, and a wrong thread can strip the hole in the casting.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679655104677,"sku":"JUK-SS7110840SP","price":1.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/screw_v2.png?v=1792234173"},{"product_id":"juki-10148351-needle-clamp-assembly-3-8","title":"JUKI 10148351 Needle Clamp Assembly 3\/8","description":"\u003ch2\u003eJUKI 10148351 Needle Clamp Assembly 3\/8\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 10148351: Needle Clamp Assembly 3\/8. This is the clamp that holds the needle in the needle bar. In the official JUKI parts list it appears for LH series machines.\u003c\/p\u003e\n\u003cp\u003eThe needle clamp keeps the needle in exactly the same position stroke after stroke. A worn or loose clamp lets the needle shift, which causes skipped stitches and needle breaks.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e10148351\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Needle Clamp Assembly 3\/8\u003c\/li\u003e\n\u003cli\u003eType: Needle Clamps\u003c\/li\u003e\n\u003cli\u003eSize mark in the JUKI name: 3\/8\u003c\/li\u003e\n\u003cli\u003eListed in 9 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 10148351 is used on these JUKI machines: LH-3128-7\/LH-3128; LH-4500C; LH-3500A Series; LH-1152; LH-1152-4\/LH-1152-5\/LH-1152-6,LH-1152-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7(for China); LH-3178\/LH-3178-7; LH-4128\/LH-4128-7\/LH-4168-7\/LH-4188-7.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe needle slips, turns or sits crooked\u003c\/li\u003e\n\u003cli\u003eSkipped stitches or frequent needle breaks\u003c\/li\u003e\n\u003cli\u003eThe clamp screw or seat is worn or damaged\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSkipped stitches and thread breaks have many causes. Before you replace a part, check that the needle is new, the right size and system and fully inserted, and check the threading and the tension.\u003c\/p\u003e\n\u003cp\u003eInsert the needle fully and with the correct orientation before tightening the clamp screw. Switch the machine off and unplug it before you start, and turn the handwheel by hand through a full stitch before the first run.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eNeedle clamps differ by machine and are often made for the left or right needle. On twin-needle machines a size such as 3\/8 or 5\/8 in the name is the needle gauge, the distance between the two needles, and the clamps, throat plate, feed dog and presser foot must all be for the same gauge.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22625800-throat-plate-3-8-9-5-mm\"\u003eJUKI 22625800 Throat Plate 3\/8 (9.5 mm)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22626006-throat-plate-1-2-12-7-mm\"\u003eJUKI 22626006 Throat Plate 1\/2 (12.7 mm)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40035893-feed-dog-type-7g-3-8\"\u003eJUKI 40035893 Feed Dog Type 7G 3\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40071912-feed-dog-7g-5-8\"\u003eJUKI 40071912 Feed Dog 7G 5\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22641252-presser-foot-assembly\"\u003eJUKI 22641252 Presser Foot Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679655202981,"sku":"JUK-10148351","price":104.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/needle_clamp_v2.png?v=1792234173"},{"product_id":"juki-10148559-needle-clamp-assembly-1-2","title":"JUKI 10148559 Needle Clamp Assembly 1\/2","description":"\u003ch2\u003eJUKI 10148559 Needle Clamp Assembly 1\/2\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 10148559: Needle Clamp Assembly 1\/2. This is the clamp that holds the needle in the needle bar. In the official JUKI parts list it appears for LH series machines.\u003c\/p\u003e\n\u003cp\u003eThe needle clamp keeps the needle in exactly the same position stroke after stroke. A worn or loose clamp lets the needle shift, which causes skipped stitches and needle breaks.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e10148559\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Needle Clamp Assembly 1\/2\u003c\/li\u003e\n\u003cli\u003eType: Needle Clamps\u003c\/li\u003e\n\u003cli\u003eSize mark in the JUKI name: 1\/2\u003c\/li\u003e\n\u003cli\u003eListed in 10 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 10148559 is used on these JUKI machines: LH-3128-7\/LH-3128; LH-4500C; LH-3500A Series; LH-1152; LH-1152-4\/LH-1152-5\/LH-1152-6,LH-1152-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7(for China); LH-3178\/LH-3178-7; LH-3120; LH-4128\/LH-4128-7\/LH-4168-7\/LH-4188-7.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe needle slips, turns or sits crooked\u003c\/li\u003e\n\u003cli\u003eSkipped stitches or frequent needle breaks\u003c\/li\u003e\n\u003cli\u003eThe clamp screw or seat is worn or damaged\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSkipped stitches and thread breaks have many causes. Before you replace a part, check that the needle is new, the right size and system and fully inserted, and check the threading and the tension.\u003c\/p\u003e\n\u003cp\u003eInsert the needle fully and with the correct orientation before tightening the clamp screw. Switch the machine off and unplug it before you start, and turn the handwheel by hand through a full stitch before the first run.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eNeedle clamps differ by machine and are often made for the left or right needle. On twin-needle machines a size such as 3\/8 or 5\/8 in the name is the needle gauge, the distance between the two needles, and the clamps, throat plate, feed dog and presser foot must all be for the same gauge.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22625800-throat-plate-3-8-9-5-mm\"\u003eJUKI 22625800 Throat Plate 3\/8 (9.5 mm)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22626006-throat-plate-1-2-12-7-mm\"\u003eJUKI 22626006 Throat Plate 1\/2 (12.7 mm)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40035893-feed-dog-type-7g-3-8\"\u003eJUKI 40035893 Feed Dog Type 7G 3\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40071912-feed-dog-7g-5-8\"\u003eJUKI 40071912 Feed Dog 7G 5\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22641252-presser-foot-assembly\"\u003eJUKI 22641252 Presser Foot Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679655235749,"sku":"JUK-10148559","price":105.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/needle_clamp_v2.png?v=1792234173"},{"product_id":"juki-10228856-needle-clamp-assembly-left-5-8","title":"JUKI 10228856 Needle Clamp Assembly Left 5\/8","description":"\u003ch2\u003eJUKI 10228856 Needle Clamp Assembly Left 5\/8\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 10228856: Needle Clamp Assembly Left 5\/8. This is the clamp that holds the needle in the needle bar. In the official JUKI parts list it appears for LH series machines.\u003c\/p\u003e\n\u003cp\u003eThe needle clamp keeps the needle in exactly the same position stroke after stroke. A worn or loose clamp lets the needle shift, which causes skipped stitches and needle breaks.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e10228856\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Needle Clamp Assembly Left 5\/8\u003c\/li\u003e\n\u003cli\u003eType: Needle Clamps\u003c\/li\u003e\n\u003cli\u003eSize mark in the JUKI name: 5\/8\u003c\/li\u003e\n\u003cli\u003eListed in 5 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 10228856 is used on these JUKI machines: LH-4500C; LH-3500A Series; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7(for China); LH-4128\/LH-4128-7\/LH-4168-7\/LH-4188-7.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe needle slips, turns or sits crooked\u003c\/li\u003e\n\u003cli\u003eSkipped stitches or frequent needle breaks\u003c\/li\u003e\n\u003cli\u003eThe clamp screw or seat is worn or damaged\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSkipped stitches and thread breaks have many causes. Before you replace a part, check that the needle is new, the right size and system and fully inserted, and check the threading and the tension.\u003c\/p\u003e\n\u003cp\u003eInsert the needle fully and with the correct orientation before tightening the clamp screw. Switch the machine off and unplug it before you start, and turn the handwheel by hand through a full stitch before the first run.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eNeedle clamps differ by machine and are often made for the left or right needle. On twin-needle machines a size such as 3\/8 or 5\/8 in the name is the needle gauge, the distance between the two needles, and the clamps, throat plate, feed dog and presser foot must all be for the same gauge.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40025495-throat-plate-trim-3-8\"\u003eJUKI 40025495 Throat Plate Trim 3\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40025499-throat-plate-trim-5-8\"\u003eJUKI 40025499 Throat Plate Trim 5\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40035893-feed-dog-type-7g-3-8\"\u003eJUKI 40035893 Feed Dog Type 7G 3\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40071912-feed-dog-7g-5-8\"\u003eJUKI 40071912 Feed Dog 7G 5\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40025236-slide-plate-assembly-r-b\"\u003eJUKI 40025236 Slide Plate Assembly R-B\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679655792805,"sku":"JUK-10228856","price":174.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/needle_clamp_v2.png?v=1792234173"},{"product_id":"juki-10228864-needle-clamp-assembly-right-5-8","title":"JUKI 10228864 Needle Clamp Assembly Right 5\/8","description":"\u003ch2\u003eJUKI 10228864 Needle Clamp Assembly Right 5\/8\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 10228864: Needle Clamp Assembly Right 5\/8. This is the clamp that holds the needle in the needle bar. In the official JUKI parts list it appears for LH series machines.\u003c\/p\u003e\n\u003cp\u003eThe needle clamp keeps the needle in exactly the same position stroke after stroke. A worn or loose clamp lets the needle shift, which causes skipped stitches and needle breaks.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e10228864\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Needle Clamp Assembly Right 5\/8\u003c\/li\u003e\n\u003cli\u003eType: Needle Clamps\u003c\/li\u003e\n\u003cli\u003eSize mark in the JUKI name: 5\/8\u003c\/li\u003e\n\u003cli\u003eListed in 5 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 10228864 is used on these JUKI machines: LH-4500C; LH-3500A Series; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7(for China); LH-4128\/LH-4128-7\/LH-4168-7\/LH-4188-7.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe needle slips, turns or sits crooked\u003c\/li\u003e\n\u003cli\u003eSkipped stitches or frequent needle breaks\u003c\/li\u003e\n\u003cli\u003eThe clamp screw or seat is worn or damaged\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSkipped stitches and thread breaks have many causes. Before you replace a part, check that the needle is new, the right size and system and fully inserted, and check the threading and the tension.\u003c\/p\u003e\n\u003cp\u003eInsert the needle fully and with the correct orientation before tightening the clamp screw. Switch the machine off and unplug it before you start, and turn the handwheel by hand through a full stitch before the first run.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eNeedle clamps differ by machine and are often made for the left or right needle. On twin-needle machines a size such as 3\/8 or 5\/8 in the name is the needle gauge, the distance between the two needles, and the clamps, throat plate, feed dog and presser foot must all be for the same gauge.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40025495-throat-plate-trim-3-8\"\u003eJUKI 40025495 Throat Plate Trim 3\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40025499-throat-plate-trim-5-8\"\u003eJUKI 40025499 Throat Plate Trim 5\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40035893-feed-dog-type-7g-3-8\"\u003eJUKI 40035893 Feed Dog Type 7G 3\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40071912-feed-dog-7g-5-8\"\u003eJUKI 40071912 Feed Dog 7G 5\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40025236-slide-plate-assembly-r-b\"\u003eJUKI 40025236 Slide Plate Assembly R-B\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679655825573,"sku":"JUK-10228864","price":174.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/needle_clamp_v2.png?v=1792234173"},{"product_id":"juki-22625800-throat-plate-3-8-9-5-mm","title":"JUKI 22625800 Throat Plate 3\/8 (9.5 mm)","description":"\u003ch2\u003eJUKI 22625800 Throat Plate 3\/8 (9.5 mm)\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 22625800: Throat Plate 3\/8 (9.5 mm). This is the plate set into the machine bed around the needle, also called the needle plate. In the official JUKI parts list it appears for LH series machines.\u003c\/p\u003e\n\u003cp\u003eThe throat plate supports the fabric around the needle hole so that it does not lift with the needle, and it carries the slots for the feed dog. A smooth needle hole of the right size gives clean stitches.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e22625800\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Throat Plate 3\/8 (9.5 mm)\u003c\/li\u003e\n\u003cli\u003eType: Throat Plates\u003c\/li\u003e\n\u003cli\u003eSize mark in the JUKI name: 3\/8\u003c\/li\u003e\n\u003cli\u003eListed in 9 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 22625800 is used on these JUKI machines: LH-3128-7\/LH-3128; LH-4500C; LH-3500A Series; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7(for China); LH-3168-7\/LH-3168; LH-3178\/LH-3178-7; LH-3188\/LH-3188-7; LH-4128\/LH-4128-7\/LH-4168-7\/LH-4188-7.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBurrs or scratches around the needle hole or the slots\u003c\/li\u003e\n\u003cli\u003eThe thread breaks or frays at the needle plate\u003c\/li\u003e\n\u003cli\u003eSkipped stitches, or fabric that is pulled into the hole\u003c\/li\u003e\n\u003cli\u003eDents or bends from needle strikes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSkipped stitches and thread breaks have many causes. Before you replace a part, check that the needle is new, the right size and system and fully inserted, and check the threading and the tension.\u003c\/p\u003e\n\u003cp\u003eAfter installing, check the clearance between needle, hook and plate and the feed dog height as given in the JUKI Engineer's Manual for your model. Switch the machine off and unplug it before you start, and turn the handwheel by hand through a full stitch before the first run.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eThroat plates differ by model, needle hole size and slot layout, and some are made for particular fabrics or stitch types. On twin-needle machines a size such as 1\/2 or 3\/8 in the name is the needle gauge, and it must match your feed dog, needle clamps and presser foot. Plates for machines with an automatic thread trimmer are often a separate version.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22641252-presser-foot-assembly\"\u003eJUKI 22641252 Presser Foot Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22641351-presser-foot-assembly\"\u003eJUKI 22641351 Presser Foot Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-10148351-needle-clamp-assembly-3-8\"\u003eJUKI 10148351 Needle Clamp Assembly 3\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-10228856-needle-clamp-assembly-left-5-8\"\u003eJUKI 10228856 Needle Clamp Assembly Left 5\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40035893-feed-dog-type-7g-3-8\"\u003eJUKI 40035893 Feed Dog Type 7G 3\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs a throat plate the same as a needle plate?\u003c\/strong\u003e\u003cbr\u003eYes. Both names are used for the same plate.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679671423141,"sku":"JUK-22625800","price":105.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/throat_plate_v2.png?v=1792234173"},{"product_id":"juki-22626006-throat-plate-1-2-12-7-mm","title":"JUKI 22626006 Throat Plate 1\/2 (12.7 mm)","description":"\u003ch2\u003eJUKI 22626006 Throat Plate 1\/2 (12.7 mm)\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 22626006: Throat Plate 1\/2 (12.7 mm). This is the plate set into the machine bed around the needle, also called the needle plate. In the official JUKI parts list it appears for LH series machines.\u003c\/p\u003e\n\u003cp\u003eThe throat plate supports the fabric around the needle hole so that it does not lift with the needle, and it carries the slots for the feed dog. A smooth needle hole of the right size gives clean stitches.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e22626006\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Throat Plate 1\/2 (12.7 mm)\u003c\/li\u003e\n\u003cli\u003eType: Throat Plates\u003c\/li\u003e\n\u003cli\u003eSize mark in the JUKI name: 1\/2\u003c\/li\u003e\n\u003cli\u003eListed in 9 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 22626006 is used on these JUKI machines: LH-3128-7\/LH-3128; LH-4500C; LH-3500A Series; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7(for China); LH-3168-7\/LH-3168; LH-3178\/LH-3178-7; LH-3188\/LH-3188-7; LH-4128\/LH-4128-7\/LH-4168-7\/LH-4188-7.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBurrs or scratches around the needle hole or the slots\u003c\/li\u003e\n\u003cli\u003eThe thread breaks or frays at the needle plate\u003c\/li\u003e\n\u003cli\u003eSkipped stitches, or fabric that is pulled into the hole\u003c\/li\u003e\n\u003cli\u003eDents or bends from needle strikes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSkipped stitches and thread breaks have many causes. Before you replace a part, check that the needle is new, the right size and system and fully inserted, and check the threading and the tension.\u003c\/p\u003e\n\u003cp\u003eAfter installing, check the clearance between needle, hook and plate and the feed dog height as given in the JUKI Engineer's Manual for your model. Switch the machine off and unplug it before you start, and turn the handwheel by hand through a full stitch before the first run.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eThroat plates differ by model, needle hole size and slot layout, and some are made for particular fabrics or stitch types. On twin-needle machines a size such as 1\/2 or 3\/8 in the name is the needle gauge, and it must match your feed dog, needle clamps and presser foot. Plates for machines with an automatic thread trimmer are often a separate version.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22641252-presser-foot-assembly\"\u003eJUKI 22641252 Presser Foot Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22641351-presser-foot-assembly\"\u003eJUKI 22641351 Presser Foot Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-10148351-needle-clamp-assembly-3-8\"\u003eJUKI 10148351 Needle Clamp Assembly 3\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-10228856-needle-clamp-assembly-left-5-8\"\u003eJUKI 10228856 Needle Clamp Assembly Left 5\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40035893-feed-dog-type-7g-3-8\"\u003eJUKI 40035893 Feed Dog Type 7G 3\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs a throat plate the same as a needle plate?\u003c\/strong\u003e\u003cbr\u003eYes. Both names are used for the same plate.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679672275109,"sku":"JUK-22626006","price":126.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/throat_plate_v2.png?v=1792234173"},{"product_id":"juki-22638456-presser-foot-assembly","title":"JUKI 22638456 Presser Foot Assembly","description":"\u003ch2\u003eJUKI 22638456 Presser Foot Assembly\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 22638456: Presser Foot Assembly. This is the foot that holds the fabric against the feed dog while the needle works. In the official JUKI parts list it appears for LH series machines.\u003c\/p\u003e\n\u003cp\u003eThe presser foot pressure and the shape of its sole determine how the fabric is held and fed. A worn, bent or marked sole feeds unevenly and can mark delicate fabric.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e22638456\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Presser Foot Assembly\u003c\/li\u003e\n\u003cli\u003eType: Presser Feet\u003c\/li\u003e\n\u003cli\u003eListed in 7 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 22638456 is used on these JUKI machines: LH-3128-7\/LH-3128; LH-4500C; LH-3500A Series; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7(for China); LH-3168-7\/LH-3168; LH-3162-4\/LH-3162-7.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFabric feeds unevenly or shifts under the foot\u003c\/li\u003e\n\u003cli\u003eThe sole is worn, bent or has burrs\u003c\/li\u003e\n\u003cli\u003eMarks or pull on the fabric along the seam\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAfter installing, check the foot against the throat plate and the needle hole and adjust the presser pressure as the JUKI Engineer's Manual for your model describes. Switch the machine off and unplug it before you start, and turn the handwheel by hand through a full stitch before the first run.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003ePresser feet differ by machine, stitch type and fabric, and many are made in left, right and size versions. On twin-needle machines a size such as 3\/8 or 5\/8 in the name is the needle gauge and must match the throat plate and the feed dog.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-b1402528kala-needle-clamp-assembly-3-8\"\u003eJUKI B1402528KALA Needle Clamp Assembly 3\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-b1402528kara-needle-clamp-assembly-3-8\"\u003eJUKI B1402528KARA Needle Clamp Assembly 3\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-b1613512f0h-feed-dog-1-4\"\u003eJUKI B1613512F0H Feed Dog 1\/4\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-b1613512l0h-feed-dog-1-2\"\u003eJUKI B1613512L0H Feed Dog 1\/2\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22625800-throat-plate-3-8-9-5-mm\"\u003eJUKI 22625800 Throat Plate 3\/8 (9.5 mm)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679672307877,"sku":"JUK-22638456","price":100.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/presser_foot_v2.png?v=1792234173"},{"product_id":"juki-22641252-presser-foot-assembly","title":"JUKI 22641252 Presser Foot Assembly","description":"\u003ch2\u003eJUKI 22641252 Presser Foot Assembly\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 22641252: Presser Foot Assembly. This is the foot that holds the fabric against the feed dog while the needle works. In the official JUKI parts list it appears for LH series machines.\u003c\/p\u003e\n\u003cp\u003eThe presser foot pressure and the shape of its sole determine how the fabric is held and fed. A worn, bent or marked sole feeds unevenly and can mark delicate fabric.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e22641252\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Presser Foot Assembly\u003c\/li\u003e\n\u003cli\u003eType: Presser Feet\u003c\/li\u003e\n\u003cli\u003eListed in 10 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 22641252 is used on these JUKI machines: LH-3128-7\/LH-3128; LH-4500C; LH-3500A Series; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7(for China); LH-3168-7\/LH-3168; LH-3162-4\/LH-3162-7; LH-3178\/LH-3178-7; LH-3188\/LH-3188-7; LH-4128\/LH-4128-7\/LH-4168-7\/LH-4188-7.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFabric feeds unevenly or shifts under the foot\u003c\/li\u003e\n\u003cli\u003eThe sole is worn, bent or has burrs\u003c\/li\u003e\n\u003cli\u003eMarks or pull on the fabric along the seam\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAfter installing, check the foot against the throat plate and the needle hole and adjust the presser pressure as the JUKI Engineer's Manual for your model describes. Switch the machine off and unplug it before you start, and turn the handwheel by hand through a full stitch before the first run.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003ePresser feet differ by machine, stitch type and fabric, and many are made in left, right and size versions. On twin-needle machines a size such as 3\/8 or 5\/8 in the name is the needle gauge and must match the throat plate and the feed dog.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22625800-throat-plate-3-8-9-5-mm\"\u003eJUKI 22625800 Throat Plate 3\/8 (9.5 mm)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22626006-throat-plate-1-2-12-7-mm\"\u003eJUKI 22626006 Throat Plate 1\/2 (12.7 mm)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-b1402528kala-needle-clamp-assembly-3-8\"\u003eJUKI B1402528KALA Needle Clamp Assembly 3\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-b1402528kara-needle-clamp-assembly-3-8\"\u003eJUKI B1402528KARA Needle Clamp Assembly 3\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40035893-feed-dog-type-7g-3-8\"\u003eJUKI 40035893 Feed Dog Type 7G 3\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679672340645,"sku":"JUK-22641252","price":132.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/presser_foot_v2.png?v=1792234173"},{"product_id":"juki-22641351-presser-foot-assembly","title":"JUKI 22641351 Presser Foot Assembly","description":"\u003ch2\u003eJUKI 22641351 Presser Foot Assembly\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 22641351: Presser Foot Assembly. This is the foot that holds the fabric against the feed dog while the needle works. In the official JUKI parts list it appears for LH series machines.\u003c\/p\u003e\n\u003cp\u003eThe presser foot pressure and the shape of its sole determine how the fabric is held and fed. A worn, bent or marked sole feeds unevenly and can mark delicate fabric.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e22641351\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Presser Foot Assembly\u003c\/li\u003e\n\u003cli\u003eType: Presser Feet\u003c\/li\u003e\n\u003cli\u003eListed in 10 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 22641351 is used on these JUKI machines: LH-3128-7\/LH-3128; LH-4500C; LH-3500A Series; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7(for China); LH-3168-7\/LH-3168; LH-3162-4\/LH-3162-7; LH-3178\/LH-3178-7; LH-3188\/LH-3188-7; LH-4128\/LH-4128-7\/LH-4168-7\/LH-4188-7.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFabric feeds unevenly or shifts under the foot\u003c\/li\u003e\n\u003cli\u003eThe sole is worn, bent or has burrs\u003c\/li\u003e\n\u003cli\u003eMarks or pull on the fabric along the seam\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAfter installing, check the foot against the throat plate and the needle hole and adjust the presser pressure as the JUKI Engineer's Manual for your model describes. Switch the machine off and unplug it before you start, and turn the handwheel by hand through a full stitch before the first run.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003ePresser feet differ by machine, stitch type and fabric, and many are made in left, right and size versions. On twin-needle machines a size such as 3\/8 or 5\/8 in the name is the needle gauge and must match the throat plate and the feed dog.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22625800-throat-plate-3-8-9-5-mm\"\u003eJUKI 22625800 Throat Plate 3\/8 (9.5 mm)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22626006-throat-plate-1-2-12-7-mm\"\u003eJUKI 22626006 Throat Plate 1\/2 (12.7 mm)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-b1402528kala-needle-clamp-assembly-3-8\"\u003eJUKI B1402528KALA Needle Clamp Assembly 3\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-b1402528kara-needle-clamp-assembly-3-8\"\u003eJUKI B1402528KARA Needle Clamp Assembly 3\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40035893-feed-dog-type-7g-3-8\"\u003eJUKI 40035893 Feed Dog Type 7G 3\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679672373413,"sku":"JUK-22641351","price":132.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/presser_foot_v2.png?v=1792234173"},{"product_id":"juki-22817050-presser-foot-assembly-d-2-4-3-8","title":"JUKI 22817050 Presser Foot Assembly D=2.4 (3\/8)","description":"\u003ch2\u003eJUKI 22817050 Presser Foot Assembly D=2.4 (3\/8)\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 22817050: Presser Foot Assembly D=2.4 (3\/8). This is the foot that holds the fabric against the feed dog while the needle works. In the official JUKI parts list it appears for LH series machines.\u003c\/p\u003e\n\u003cp\u003eThe presser foot pressure and the shape of its sole determine how the fabric is held and fed. A worn, bent or marked sole feeds unevenly and can mark delicate fabric.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e22817050\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Presser Foot Assembly D=2.4 (3\/8)\u003c\/li\u003e\n\u003cli\u003eType: Presser Feet\u003c\/li\u003e\n\u003cli\u003eSize in the JUKI name: D=2.4\u003c\/li\u003e\n\u003cli\u003eSize mark in the JUKI name: 3\/8\u003c\/li\u003e\n\u003cli\u003eListed in 8 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 22817050 is used on these JUKI machines: LH-4500C; LH-3500A Series; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7(for China); LH-3178\/LH-3178-7; LH-3188\/LH-3188-7; LH-3182-4\/LH-3182-7; LH-4128\/LH-4128-7\/LH-4168-7\/LH-4188-7.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFabric feeds unevenly or shifts under the foot\u003c\/li\u003e\n\u003cli\u003eThe sole is worn, bent or has burrs\u003c\/li\u003e\n\u003cli\u003eMarks or pull on the fabric along the seam\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAfter installing, check the foot against the throat plate and the needle hole and adjust the presser pressure as the JUKI Engineer's Manual for your model describes. Switch the machine off and unplug it before you start, and turn the handwheel by hand through a full stitch before the first run.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003ePresser feet differ by machine, stitch type and fabric, and many are made in left, right and size versions. On twin-needle machines a size such as 3\/8 or 5\/8 in the name is the needle gauge and must match the throat plate and the feed dog.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22827257-bobbin-case-assembly\"\u003eJUKI 22827257 Bobbin Case Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22625800-throat-plate-3-8-9-5-mm\"\u003eJUKI 22625800 Throat Plate 3\/8 (9.5 mm)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22626006-throat-plate-1-2-12-7-mm\"\u003eJUKI 22626006 Throat Plate 1\/2 (12.7 mm)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-10228856-needle-clamp-assembly-left-5-8\"\u003eJUKI 10228856 Needle Clamp Assembly Left 5\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-10228864-needle-clamp-assembly-right-5-8\"\u003eJUKI 10228864 Needle Clamp Assembly Right 5\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679672438949,"sku":"JUK-22817050","price":160.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/presser_foot_v2.png?v=1792234173"},{"product_id":"juki-22948558-knife-driving-arm-assembly","title":"JUKI 22948558 Knife Driving Arm Assembly","description":"\u003ch2\u003eJUKI 22948558 Knife Driving Arm Assembly\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 22948558: Knife Driving Arm Assembly. This is a part that holds, guides or drives a knife. In the official JUKI parts list it appears for DDL, DLD, DLN and other series machines. It replaces the earlier JUKI part number 11040854.\u003c\/p\u003e\n\u003cp\u003eKnife accessories such as washers, covers, seats, plates and driving arms keep the cutting edges at the right position and pressure. A loose or worn support makes even a sharp knife cut badly.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e22948558\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Knife Driving Arm Assembly\u003c\/li\u003e\n\u003cli\u003eType: Knives\u003c\/li\u003e\n\u003cli\u003eReplaces the earlier part number 11040854\u003c\/li\u003e\n\u003cli\u003eListed in 33 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 22948558 is used on these JUKI machines: DDL-8500-7; DDL-8700-7; DDL-5570N\/DDL-5580N Series; DLD-5430N\/DLD-5430N-7; DLN-5410N-7\/DLN-5410NH-7\/DLN-5410NJ-7; DLU-5490N-7 Series; DLU-5494N-7; DDL-5571N\/DDL-5581N; DDL-5550N-7 Series; DDL-8100B-7\/DDL-8100B-7R; DDL-8700B-7; DDL-8700A-7; DDL-900A; DLN-6390\/DLN-6390-7; DLN-5410NDD-7; LH-3500A Series; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7(for China); LH-4128\/LH-4128-7\/LH-4168-7\/LH-4188-7; LZ-2280B; LZ-2280A\/LZ-2280A-7 Series (For China); LZ-2280N\/LZ-2280N-7\/LZ-2282N\/LZ-2282N-7\/LZ-2282NU-7\/LZ-2286NU-7\/LZ-2288NU-7; LZ-2290C; LZ-2280 Series; LZ-2280N\/LZ-2280N-7 Series; LZ-2280A\/LZ-2280A-7 Series; LZ-2290\/LZ-2290-7; LZ-2290A\/LZ-2290A-7\/LZ-2290A-SR-7; AE-200AN; AE-200A; AVP-875\/AW2; DU-1181N-7; DDL-5600NL-7\/DDL-5600NU-7\/DDL-5600NJ-7\/DDL-5600NR-7.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe knife wobbles or cuts inconsistently\u003c\/li\u003e\n\u003cli\u003eThe mounting is loose, bent or damaged\u003c\/li\u003e\n\u003cli\u003eVisible wear where the part touches the knife\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAfter installing, check the knife pressure and timing as described in the JUKI Engineer's Manual for your model. Knife edges are very sharp, so handle them with care. Switch the machine off and unplug it before you start, and turn the handwheel by hand through a full stitch before the first run.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eThese parts are specific to the knife mechanism of the machine. Where the name carries a letter or a side (A, B, C, D, left, right), keep the same one.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22907406-presser-spring\"\u003eJUKI 22907406 Presser Spring\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22907802-hand-lifter\"\u003eJUKI 22907802 Hand Lifter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-d2468555b00-rubber-plunger\"\u003eJUKI D2468555B00 Rubber Plunger\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-11071495-hand-wheel-assembly\"\u003eJUKI 11071495 Hand Wheel Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22940654-feed-rocker-assembly\"\u003eJUKI 22940654 Feed Rocker Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eI have the old number 11040854. Is this the right part?\u003c\/strong\u003e\u003cbr\u003eYes. JUKI lists 22948558 as the replacement for 11040854.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679683547301,"sku":"JUK-22948558","price":9.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/knife_v2.png?v=1792234173"},{"product_id":"juki-23630007-tube","title":"JUKI 23630007 Tube","description":"\u003ch2\u003eJUKI 23630007 Tube\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 23630007: Tube. This is a mechanical part of the machine. In the official JUKI parts list it appears for DDL, DLN, LH and other series machines. It replaces the earlier JUKI part number BP300000000.\u003c\/p\u003e\n\u003cp\u003eThis part is listed by JUKI under its own part number and has one fixed place in the machine. Check the part number against your machine's parts list before you order.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e23630007\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Tube\u003c\/li\u003e\n\u003cli\u003eType: Machine Parts\u003c\/li\u003e\n\u003cli\u003eReplaces the earlier part number BP300000000\u003c\/li\u003e\n\u003cli\u003eListed in 32 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 23630007 is used on these JUKI machines: DDL-8000AS,AB; DDL-900B; DDL-900BB; DDL-9000B\/X73199; DDL-9000C-S; DDL-9000C-F; DLN-9010; DDL-9000A; DDL-8000AP; DDL-9000A\/PBN; DDL-9000B; DDL-900A; DDL-9000; DLN-6390\/DLN-6390-7; DLN-9010A; LH-3128-7\/LH-3128; LH-3500A Series; LH-1152; LH-1152-4\/LH-1152-5\/LH-1152-6,LH-1152-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7(for China); LH-3168-7\/LH-3168; LH-3162-4\/LH-3162-7; LH-3178\/LH-3178-7; LH-3188\/LH-3188-7; LH-3182-4\/LH-3182-7; LH-3120; LH-3126F; LH-4128\/LH-4128-7\/LH-4168-7\/LH-4188-7; MO-6700DA-0E4\/MO-6714DA-BE6\/MO-6716DA-DE4; MO-6700D; MO-6700S-0E4\/MO-6714S-BE\/MO-6716S-DE4.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePlay, noise or a function that has stopped working correctly\u003c\/li\u003e\n\u003cli\u003eA visible crack, bend, wear or breakage\u003c\/li\u003e\n\u003cli\u003eA part that was lost during service\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInstall it in the same position and with the same fasteners as the original, and recheck the related adjustment.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eMachine parts are specific to the model.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-ss8660610tp-screw-1-4-40-l-6\"\u003eJUKI SS8660610TP Screw 1\/4-40 L=6\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22907802-hand-lifter\"\u003eJUKI 22907802 Hand Lifter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-wp0501016sd-washer-5x10-5x1\"\u003eJUKI WP0501016SD Washer 5X10.5X1\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-10148559-needle-clamp-assembly-1-2\"\u003eJUKI 10148559 Needle Clamp Assembly 1\/2\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22641252-presser-foot-assembly\"\u003eJUKI 22641252 Presser Foot Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eI have the old number BP300000000. Is this the right part?\u003c\/strong\u003e\u003cbr\u003eYes. JUKI lists 23630007 as the replacement for BP300000000.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679683645605,"sku":"JUK-23630007","price":2.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/generic_v2.png?v=1792234173"},{"product_id":"juki-23630106-tube-b","title":"JUKI 23630106 Tube B","description":"\u003ch2\u003eJUKI 23630106 Tube B\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 23630106: Tube B. This is a mechanical part of the machine. In the official JUKI parts list it appears for DDL, DLN, LH and other series machines.\u003c\/p\u003e\n\u003cp\u003eThis part is listed by JUKI under its own part number and has one fixed place in the machine. Check the part number against your machine's parts list before you order.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e23630106\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Tube B\u003c\/li\u003e\n\u003cli\u003eType: Machine Parts\u003c\/li\u003e\n\u003cli\u003eListed in 35 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 23630106 is used on these JUKI machines: DDL-8000AS,AB; DDL-9000B\/X73199; DDL-9000C-S; DDL-9000C-F; DLN-9010; DDL-9000A; DDL-8000AP; DDL-9000B; DDL-9000; DLN-9010A; LH-4500C; LH-3500A Series; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7(for China); LH-4128\/LH-4128-7\/LH-4168-7\/LH-4188-7; LZ-2290C; LZ-2290\/LZ-2290-7; LZ-2290A\/LZ-2290A-7\/LZ-2290A-SR-7; MF-3620; MS-1261A; APW-895N; APW-896N; APW-895NE\/IP-420; APW-895; APW-896; APW-895L; AMS-251; LU-2860V-7; LU-2828V-7; LU-2828-6\/LU-2828-7; LU-2800 Series; LU-2810ES-7,LU-2818ES-7; LU-2828ES-7; PLC-2700V Series; PLC-2700 Series.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePlay, noise or a function that has stopped working correctly\u003c\/li\u003e\n\u003cli\u003eA visible crack, bend, wear or breakage\u003c\/li\u003e\n\u003cli\u003eA part that was lost during service\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInstall it in the same position and with the same fasteners as the original, and recheck the related adjustment.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eMachine parts are specific to the model.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-b91210120a0-oiler-assembly\"\u003eJUKI B91210120A0 Oiler Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-23639206-connecting-rod\"\u003eJUKI 23639206 Connecting Rod\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40088958-bobbin-thread-tension-assembly\"\u003eJUKI 40088958 Bobbin Thread Tension Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-ro098240100-o-ring\"\u003eJUKI RO098240100 O-Ring\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40151800-cushion-rubber\"\u003eJUKI 40151800 Cushion Rubber\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679683678373,"sku":"JUK-23630106","price":3.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/generic_v2.png?v=1792234173"},{"product_id":"juki-40025495-throat-plate-trim-3-8","title":"JUKI 40025495 Throat Plate Trim 3\/8","description":"\u003ch2\u003eJUKI 40025495 Throat Plate Trim 3\/8\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 40025495: Throat Plate Trim 3\/8. This is the plate set into the machine bed around the needle, also called the needle plate. In the official JUKI parts list it appears for LH series machines.\u003c\/p\u003e\n\u003cp\u003eThe throat plate supports the fabric around the needle hole so that it does not lift with the needle, and it carries the slots for the feed dog. A smooth needle hole of the right size gives clean stitches.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e40025495\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Throat Plate TRIM-3\/8\u003c\/li\u003e\n\u003cli\u003eType: Throat Plates\u003c\/li\u003e\n\u003cli\u003eSize mark in the JUKI name: 3\/8\u003c\/li\u003e\n\u003cli\u003eListed in 5 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 40025495 is used on these JUKI machines: LH-4500C; LH-3500A Series; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7(for China); LH-4128\/LH-4128-7\/LH-4168-7\/LH-4188-7.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBurrs or scratches around the needle hole or the slots\u003c\/li\u003e\n\u003cli\u003eThe thread breaks or frays at the needle plate\u003c\/li\u003e\n\u003cli\u003eSkipped stitches, or fabric that is pulled into the hole\u003c\/li\u003e\n\u003cli\u003eDents or bends from needle strikes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSkipped stitches and thread breaks have many causes. Before you replace a part, check that the needle is new, the right size and system and fully inserted, and check the threading and the tension.\u003c\/p\u003e\n\u003cp\u003eAfter installing, check the clearance between needle, hook and plate and the feed dog height as given in the JUKI Engineer's Manual for your model. Switch the machine off and unplug it before you start, and turn the handwheel by hand through a full stitch before the first run.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eThroat plates differ by model, needle hole size and slot layout, and some are made for particular fabrics or stitch types. On twin-needle machines a size such as 1\/2 or 3\/8 in the name is the needle gauge, and it must match your feed dog, needle clamps and presser foot. Plates for machines with an automatic thread trimmer are often a separate version.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-10228856-needle-clamp-assembly-left-5-8\"\u003eJUKI 10228856 Needle Clamp Assembly Left 5\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-10228864-needle-clamp-assembly-right-5-8\"\u003eJUKI 10228864 Needle Clamp Assembly Right 5\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40035893-feed-dog-type-7g-3-8\"\u003eJUKI 40035893 Feed Dog Type 7G 3\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40071912-feed-dog-7g-5-8\"\u003eJUKI 40071912 Feed Dog 7G 5\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40025236-slide-plate-assembly-r-b\"\u003eJUKI 40025236 Slide Plate Assembly R-B\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs a throat plate the same as a needle plate?\u003c\/strong\u003e\u003cbr\u003eYes. Both names are used for the same plate.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679697932453,"sku":"JUK-40025495","price":193.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/throat_plate_v2.png?v=1792234173"},{"product_id":"juki-40025499-throat-plate-trim-5-8","title":"JUKI 40025499 Throat Plate Trim 5\/8","description":"\u003ch2\u003eJUKI 40025499 Throat Plate Trim 5\/8\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 40025499: Throat Plate Trim 5\/8. This is the plate set into the machine bed around the needle, also called the needle plate. In the official JUKI parts list it appears for LH series machines.\u003c\/p\u003e\n\u003cp\u003eThe throat plate supports the fabric around the needle hole so that it does not lift with the needle, and it carries the slots for the feed dog. A smooth needle hole of the right size gives clean stitches.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e40025499\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Throat Plate TRIM-5\/8\u003c\/li\u003e\n\u003cli\u003eType: Throat Plates\u003c\/li\u003e\n\u003cli\u003eSize mark in the JUKI name: 5\/8\u003c\/li\u003e\n\u003cli\u003eListed in 5 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 40025499 is used on these JUKI machines: LH-4500C; LH-3500A Series; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7(for China); LH-4128\/LH-4128-7\/LH-4168-7\/LH-4188-7.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBurrs or scratches around the needle hole or the slots\u003c\/li\u003e\n\u003cli\u003eThe thread breaks or frays at the needle plate\u003c\/li\u003e\n\u003cli\u003eSkipped stitches, or fabric that is pulled into the hole\u003c\/li\u003e\n\u003cli\u003eDents or bends from needle strikes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSkipped stitches and thread breaks have many causes. Before you replace a part, check that the needle is new, the right size and system and fully inserted, and check the threading and the tension.\u003c\/p\u003e\n\u003cp\u003eAfter installing, check the clearance between needle, hook and plate and the feed dog height as given in the JUKI Engineer's Manual for your model. Switch the machine off and unplug it before you start, and turn the handwheel by hand through a full stitch before the first run.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eThroat plates differ by model, needle hole size and slot layout, and some are made for particular fabrics or stitch types. On twin-needle machines a size such as 1\/2 or 3\/8 in the name is the needle gauge, and it must match your feed dog, needle clamps and presser foot. Plates for machines with an automatic thread trimmer are often a separate version.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-10228856-needle-clamp-assembly-left-5-8\"\u003eJUKI 10228856 Needle Clamp Assembly Left 5\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-10228864-needle-clamp-assembly-right-5-8\"\u003eJUKI 10228864 Needle Clamp Assembly Right 5\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40035893-feed-dog-type-7g-3-8\"\u003eJUKI 40035893 Feed Dog Type 7G 3\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40071912-feed-dog-7g-5-8\"\u003eJUKI 40071912 Feed Dog 7G 5\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40025236-slide-plate-assembly-r-b\"\u003eJUKI 40025236 Slide Plate Assembly R-B\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs a throat plate the same as a needle plate?\u003c\/strong\u003e\u003cbr\u003eYes. Both names are used for the same plate.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679697965221,"sku":"JUK-40025499","price":193.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/throat_plate_v2.png?v=1792234173"},{"product_id":"juki-40026920-synchronizer-assembly","title":"JUKI 40026920 Synchronizer Assembly","description":"\u003ch2\u003eJUKI 40026920 Synchronizer Assembly\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 40026920: Synchronizer Assembly. This is an electrical part of the machine. In the official JUKI parts list it appears for LH, MF, APW and other series machines. It replaces the earlier JUKI part number GSY010000A0.\u003c\/p\u003e\n\u003cp\u003eSwitches, cords, solenoids, sensors and boxes control and power the machine. A faulty electrical part can cause erratic operation, so the correct connector and rating matter. The synchronizer tells the control unit the position of the needle, so the machine can stop with the needle up or down.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e40026920\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Synchronizer Assembly\u003c\/li\u003e\n\u003cli\u003eType: Electrical Parts\u003c\/li\u003e\n\u003cli\u003eReplaces the earlier part number GSY010000A0\u003c\/li\u003e\n\u003cli\u003eListed in 31 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 40026920 is used on these JUKI machines: LH-3500A Series; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7(for China); MF-7700\/UT33; APW-194N; APW-195N; APW-196N; TC-16; MT-01; UT25; UT33; TC-13; LZH-1290 Series; DU-141H-7; LU-2220N-7; LU-2212N-7\/2210N-6,-7\/2210W-6,-7\/2260N-7\/2260W-6,-7; LU-2216N-7\/LU-2266N-7; LS-1342\/LS-1342-7; DSC-245,-4,-7; DSC-246V\/DSC-246V-4,-7; DSC-246\/DSC-246-4,-7; DSU-142\/DSU-142-4,-7; DSU-144-4,-7; DSC-244V\/DSC-244V-4\/DSC-244V-6; DSC-244\/DSC-244-4\/DSC-244-6; DSC-245V-4,-7; DSU-145\/145-4\/145-7; PLC-2700 Series; PLC-1710\/PLC-1760\/PLC-1760L; PLC-1660\/PLC-1660-7\/PLC-1660L; PLC-1610\/PLC-1610-7.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe function is intermittent or lost\u003c\/li\u003e\n\u003cli\u003eDamaged cable insulation, loose or burnt contacts\u003c\/li\u003e\n\u003cli\u003eA switch or solenoid that sticks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSwitch the machine off, unplug it and wait at least five minutes before opening any control box. Have electrical work done by a qualified person.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eElectrical parts differ by machine, control box and voltage.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-b1652245000-screw\"\u003eJUKI B1652245000 Screw\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-10320109-screw-stud\"\u003eJUKI 10320109 Screw Stud\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-10759603-aluminum-bobbin-double-cut\"\u003eJUKI 10759603 Aluminum Bobbin (Double-Cut)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-b18302450a0-hook-assembly\"\u003eJUKI B18302450A0 Hook Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-b1131562000-frame-thread-guide-lower\"\u003eJUKI B1131562000 Frame Thread Guide Lower\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eI have the old number GSY010000A0. Is this the right part?\u003c\/strong\u003e\u003cbr\u003eYes. JUKI lists 40026920 as the replacement for GSY010000A0.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679697997989,"sku":"JUK-40026920","price":196.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/electric_v2.png?v=1792234173"},{"product_id":"juki-40033724-feed-dog-type-aa-3-8","title":"JUKI 40033724 Feed Dog Type AA 3\/8","description":"\u003ch2\u003eJUKI 40033724 Feed Dog Type AA 3\/8\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 40033724: Feed Dog Type AA 3\/8. This is the toothed plate under the throat plate that moves the fabric from stitch to stitch. In the official JUKI parts list it appears for LH series machines.\u003c\/p\u003e\n\u003cp\u003eWith every stitch the feed dog rises through the slots of the throat plate, grips the fabric against the presser foot, moves it forward by one stitch length and drops below the plate again. Tooth pattern and size decide how well it grips and how evenly the fabric travels.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e40033724\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Feed Dog Type AA 3\/8\u003c\/li\u003e\n\u003cli\u003eType: Feed Dogs\u003c\/li\u003e\n\u003cli\u003eSize mark in the JUKI name: 3\/8\u003c\/li\u003e\n\u003cli\u003eListed in 4 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 40033724 is used on these JUKI machines: LH-4500C; LH-3500A Series; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7(for China).\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFabric slips or feeds unevenly and the stitch length varies\u003c\/li\u003e\n\u003cli\u003eThe teeth are flattened, rounded or burred and no longer grip\u003c\/li\u003e\n\u003cli\u003eThe fabric is marked or snagged along the feed path\u003c\/li\u003e\n\u003cli\u003eThe feed dog is bent or touches the throat plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eReplace the feed dog together with the throat plate when both are worn, and set the feed dog height as given in the JUKI Engineer's Manual for your model. Switch the machine off and unplug it before you start, and turn the handwheel by hand through a full stitch before the first run.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eFeed dogs differ by machine model, tooth pattern and size. On twin-needle machines a size such as 3\/8 or 1\/2 in the name is the needle gauge, and it must match your throat plate, needle clamps and presser foot. Where the name carries a type mark such as AA or 7G, keep the same one.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-10228856-needle-clamp-assembly-left-5-8\"\u003eJUKI 10228856 Needle Clamp Assembly Left 5\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-10228864-needle-clamp-assembly-right-5-8\"\u003eJUKI 10228864 Needle Clamp Assembly Right 5\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40025495-throat-plate-trim-3-8\"\u003eJUKI 40025495 Throat Plate Trim 3\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40025499-throat-plate-trim-5-8\"\u003eJUKI 40025499 Throat Plate Trim 5\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22638456-presser-foot-assembly\"\u003eJUKI 22638456 Presser Foot Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to replace the throat plate as well?\u003c\/strong\u003e\u003cbr\u003eNot always, but a worn feed dog and a worn throat plate usually go together. If the slots in the plate are rough or burred, or the needle hole is damaged, replace both for a clean feed.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679699800229,"sku":"JUK-40033724","price":164.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/feed_dog_v2.png?v=1792234173"},{"product_id":"juki-40033727-feed-dog-type-aa-1-2","title":"JUKI 40033727 Feed Dog Type AA 1\/2","description":"\u003ch2\u003eJUKI 40033727 Feed Dog Type AA 1\/2\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 40033727: Feed Dog Type AA 1\/2. This is the toothed plate under the throat plate that moves the fabric from stitch to stitch. In the official JUKI parts list it appears for LH series machines.\u003c\/p\u003e\n\u003cp\u003eWith every stitch the feed dog rises through the slots of the throat plate, grips the fabric against the presser foot, moves it forward by one stitch length and drops below the plate again. Tooth pattern and size decide how well it grips and how evenly the fabric travels.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e40033727\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Feed Dog Type AA 1\/2\u003c\/li\u003e\n\u003cli\u003eType: Feed Dogs\u003c\/li\u003e\n\u003cli\u003eSize mark in the JUKI name: 1\/2\u003c\/li\u003e\n\u003cli\u003eListed in 4 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 40033727 is used on these JUKI machines: LH-4500C; LH-3500A Series; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7(for China).\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFabric slips or feeds unevenly and the stitch length varies\u003c\/li\u003e\n\u003cli\u003eThe teeth are flattened, rounded or burred and no longer grip\u003c\/li\u003e\n\u003cli\u003eThe fabric is marked or snagged along the feed path\u003c\/li\u003e\n\u003cli\u003eThe feed dog is bent or touches the throat plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eReplace the feed dog together with the throat plate when both are worn, and set the feed dog height as given in the JUKI Engineer's Manual for your model. Switch the machine off and unplug it before you start, and turn the handwheel by hand through a full stitch before the first run.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eFeed dogs differ by machine model, tooth pattern and size. On twin-needle machines a size such as 3\/8 or 1\/2 in the name is the needle gauge, and it must match your throat plate, needle clamps and presser foot. Where the name carries a type mark such as AA or 7G, keep the same one.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-10228856-needle-clamp-assembly-left-5-8\"\u003eJUKI 10228856 Needle Clamp Assembly Left 5\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-10228864-needle-clamp-assembly-right-5-8\"\u003eJUKI 10228864 Needle Clamp Assembly Right 5\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40025495-throat-plate-trim-3-8\"\u003eJUKI 40025495 Throat Plate Trim 3\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40025499-throat-plate-trim-5-8\"\u003eJUKI 40025499 Throat Plate Trim 5\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22638456-presser-foot-assembly\"\u003eJUKI 22638456 Presser Foot Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to replace the throat plate as well?\u003c\/strong\u003e\u003cbr\u003eNot always, but a worn feed dog and a worn throat plate usually go together. If the slots in the plate are rough or burred, or the needle hole is damaged, replace both for a clean feed.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679699832997,"sku":"JUK-40033727","price":164.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/feed_dog_v2.png?v=1792234173"},{"product_id":"juki-40035893-feed-dog-type-7g-3-8","title":"JUKI 40035893 Feed Dog Type 7G 3\/8","description":"\u003ch2\u003eJUKI 40035893 Feed Dog Type 7G 3\/8\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 40035893: Feed Dog Type 7G 3\/8. This is the toothed plate under the throat plate that moves the fabric from stitch to stitch. In the official JUKI parts list it appears for LH series machines.\u003c\/p\u003e\n\u003cp\u003eWith every stitch the feed dog rises through the slots of the throat plate, grips the fabric against the presser foot, moves it forward by one stitch length and drops below the plate again. Tooth pattern and size decide how well it grips and how evenly the fabric travels.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e40035893\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Feed Dog Type 7G 3\/8\u003c\/li\u003e\n\u003cli\u003eType: Feed Dogs\u003c\/li\u003e\n\u003cli\u003eSize mark in the JUKI name: 3\/8\u003c\/li\u003e\n\u003cli\u003eListed in 5 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 40035893 is used on these JUKI machines: LH-4500C; LH-3500A Series; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7(for China); LH-4128\/LH-4128-7\/LH-4168-7\/LH-4188-7.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFabric slips or feeds unevenly and the stitch length varies\u003c\/li\u003e\n\u003cli\u003eThe teeth are flattened, rounded or burred and no longer grip\u003c\/li\u003e\n\u003cli\u003eThe fabric is marked or snagged along the feed path\u003c\/li\u003e\n\u003cli\u003eThe feed dog is bent or touches the throat plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eReplace the feed dog together with the throat plate when both are worn, and set the feed dog height as given in the JUKI Engineer's Manual for your model. Switch the machine off and unplug it before you start, and turn the handwheel by hand through a full stitch before the first run.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eFeed dogs differ by machine model, tooth pattern and size. On twin-needle machines a size such as 3\/8 or 1\/2 in the name is the needle gauge, and it must match your throat plate, needle clamps and presser foot. Where the name carries a type mark such as AA or 7G, keep the same one.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-10228856-needle-clamp-assembly-left-5-8\"\u003eJUKI 10228856 Needle Clamp Assembly Left 5\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-10228864-needle-clamp-assembly-right-5-8\"\u003eJUKI 10228864 Needle Clamp Assembly Right 5\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40025495-throat-plate-trim-3-8\"\u003eJUKI 40025495 Throat Plate Trim 3\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40025499-throat-plate-trim-5-8\"\u003eJUKI 40025499 Throat Plate Trim 5\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40025236-slide-plate-assembly-r-b\"\u003eJUKI 40025236 Slide Plate Assembly R-B\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to replace the throat plate as well?\u003c\/strong\u003e\u003cbr\u003eNot always, but a worn feed dog and a worn throat plate usually go together. If the slots in the plate are rough or burred, or the needle hole is damaged, replace both for a clean feed.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679699865765,"sku":"JUK-40035893","price":171.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/feed_dog_v2.png?v=1792234173"},{"product_id":"juki-40071912-feed-dog-7g-5-8","title":"JUKI 40071912 Feed Dog 7G 5\/8","description":"\u003ch2\u003eJUKI 40071912 Feed Dog 7G 5\/8\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 40071912: Feed Dog 7G 5\/8. This is the toothed plate under the throat plate that moves the fabric from stitch to stitch. In the official JUKI parts list it appears for LH series machines.\u003c\/p\u003e\n\u003cp\u003eWith every stitch the feed dog rises through the slots of the throat plate, grips the fabric against the presser foot, moves it forward by one stitch length and drops below the plate again. Tooth pattern and size decide how well it grips and how evenly the fabric travels.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e40071912\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Feed Dog 7G 5\/8\u003c\/li\u003e\n\u003cli\u003eType: Feed Dogs\u003c\/li\u003e\n\u003cli\u003eSize mark in the JUKI name: 5\/8\u003c\/li\u003e\n\u003cli\u003eListed in 5 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 40071912 is used on these JUKI machines: LH-4500C; LH-3500A Series; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7(for China); LH-4128\/LH-4128-7\/LH-4168-7\/LH-4188-7.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFabric slips or feeds unevenly and the stitch length varies\u003c\/li\u003e\n\u003cli\u003eThe teeth are flattened, rounded or burred and no longer grip\u003c\/li\u003e\n\u003cli\u003eThe fabric is marked or snagged along the feed path\u003c\/li\u003e\n\u003cli\u003eThe feed dog is bent or touches the throat plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eReplace the feed dog together with the throat plate when both are worn, and set the feed dog height as given in the JUKI Engineer's Manual for your model. Switch the machine off and unplug it before you start, and turn the handwheel by hand through a full stitch before the first run.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eFeed dogs differ by machine model, tooth pattern and size. On twin-needle machines a size such as 3\/8 or 1\/2 in the name is the needle gauge, and it must match your throat plate, needle clamps and presser foot. Where the name carries a type mark such as AA or 7G, keep the same one.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-10228856-needle-clamp-assembly-left-5-8\"\u003eJUKI 10228856 Needle Clamp Assembly Left 5\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-10228864-needle-clamp-assembly-right-5-8\"\u003eJUKI 10228864 Needle Clamp Assembly Right 5\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40025495-throat-plate-trim-3-8\"\u003eJUKI 40025495 Throat Plate Trim 3\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40025499-throat-plate-trim-5-8\"\u003eJUKI 40025499 Throat Plate Trim 5\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40025236-slide-plate-assembly-r-b\"\u003eJUKI 40025236 Slide Plate Assembly R-B\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to replace the throat plate as well?\u003c\/strong\u003e\u003cbr\u003eNot always, but a worn feed dog and a worn throat plate usually go together. If the slots in the plate are rough or burred, or the needle hole is damaged, replace both for a clean feed.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679699931301,"sku":"JUK-40071912","price":164.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/feed_dog_v2.png?v=1792234173"},{"product_id":"juki-b1402526lala-needle-clamp-left-assembly","title":"JUKI B1402526LALA Needle Clamp Left Assembly","description":"\u003ch2\u003eJUKI B1402526LALA Needle Clamp Left Assembly\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part B1402526LALA: Needle Clamp Left Assembly. This is the clamp that holds the needle in the needle bar. In the official JUKI parts list it appears for LH and LU series machines.\u003c\/p\u003e\n\u003cp\u003eThe needle clamp keeps the needle in exactly the same position stroke after stroke. A worn or loose clamp lets the needle shift, which causes skipped stitches and needle breaks.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003eB1402526LALA\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Needle Clamp Left Assembly\u003c\/li\u003e\n\u003cli\u003eType: Needle Clamps\u003c\/li\u003e\n\u003cli\u003eListed in 6 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart B1402526LALA is used on these JUKI machines: LH-4500C; LH-3500A Series; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7(for China); LH-4128\/LH-4128-7\/LH-4168-7\/LH-4188-7; LU-1565N.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe needle slips, turns or sits crooked\u003c\/li\u003e\n\u003cli\u003eSkipped stitches or frequent needle breaks\u003c\/li\u003e\n\u003cli\u003eThe clamp screw or seat is worn or damaged\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSkipped stitches and thread breaks have many causes. Before you replace a part, check that the needle is new, the right size and system and fully inserted, and check the threading and the tension.\u003c\/p\u003e\n\u003cp\u003eInsert the needle fully and with the correct orientation before tightening the clamp screw. Switch the machine off and unplug it before you start, and turn the handwheel by hand through a full stitch before the first run.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eNeedle clamps differ by machine and are often made for the left or right needle. On twin-needle machines a size such as 3\/8 or 5\/8 in the name is the needle gauge, the distance between the two needles, and the clamps, throat plate, feed dog and presser foot must all be for the same gauge.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40025495-throat-plate-trim-3-8\"\u003eJUKI 40025495 Throat Plate Trim 3\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40025499-throat-plate-trim-5-8\"\u003eJUKI 40025499 Throat Plate Trim 5\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40035893-feed-dog-type-7g-3-8\"\u003eJUKI 40035893 Feed Dog Type 7G 3\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40071912-feed-dog-7g-5-8\"\u003eJUKI 40071912 Feed Dog 7G 5\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40025236-slide-plate-assembly-r-b\"\u003eJUKI 40025236 Slide Plate Assembly R-B\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679755309221,"sku":"JUK-B1402526LALA","price":62.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/needle_clamp_v2.png?v=1792234173"},{"product_id":"juki-b1402526lara-needle-clamp-right-assembly","title":"JUKI B1402526LARA Needle Clamp Right Assembly","description":"\u003ch2\u003eJUKI B1402526LARA Needle Clamp Right Assembly\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part B1402526LARA: Needle Clamp Right Assembly. This is the clamp that holds the needle in the needle bar. In the official JUKI parts list it appears for LH and LU series machines.\u003c\/p\u003e\n\u003cp\u003eThe needle clamp keeps the needle in exactly the same position stroke after stroke. A worn or loose clamp lets the needle shift, which causes skipped stitches and needle breaks.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003eB1402526LARA\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Needle Clamp Right Assembly\u003c\/li\u003e\n\u003cli\u003eType: Needle Clamps\u003c\/li\u003e\n\u003cli\u003eListed in 6 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart B1402526LARA is used on these JUKI machines: LH-4500C; LH-3500A Series; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7(for China); LH-4128\/LH-4128-7\/LH-4168-7\/LH-4188-7; LU-1565N.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe needle slips, turns or sits crooked\u003c\/li\u003e\n\u003cli\u003eSkipped stitches or frequent needle breaks\u003c\/li\u003e\n\u003cli\u003eThe clamp screw or seat is worn or damaged\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSkipped stitches and thread breaks have many causes. Before you replace a part, check that the needle is new, the right size and system and fully inserted, and check the threading and the tension.\u003c\/p\u003e\n\u003cp\u003eInsert the needle fully and with the correct orientation before tightening the clamp screw. Switch the machine off and unplug it before you start, and turn the handwheel by hand through a full stitch before the first run.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eNeedle clamps differ by machine and are often made for the left or right needle. On twin-needle machines a size such as 3\/8 or 5\/8 in the name is the needle gauge, the distance between the two needles, and the clamps, throat plate, feed dog and presser foot must all be for the same gauge.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40025495-throat-plate-trim-3-8\"\u003eJUKI 40025495 Throat Plate Trim 3\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40025499-throat-plate-trim-5-8\"\u003eJUKI 40025499 Throat Plate Trim 5\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40035893-feed-dog-type-7g-3-8\"\u003eJUKI 40035893 Feed Dog Type 7G 3\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40071912-feed-dog-7g-5-8\"\u003eJUKI 40071912 Feed Dog 7G 5\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40025236-slide-plate-assembly-r-b\"\u003eJUKI 40025236 Slide Plate Assembly R-B\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679755505829,"sku":"JUK-B1402526LARA","price":62.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/needle_clamp_v2.png?v=1792234173"},{"product_id":"juki-b1402528kala-needle-clamp-assembly-3-8","title":"JUKI B1402528KALA Needle Clamp Assembly 3\/8","description":"\u003ch2\u003eJUKI B1402528KALA Needle Clamp Assembly 3\/8\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part B1402528KALA: Needle Clamp Assembly 3\/8. This is the clamp that holds the needle in the needle bar. In the official JUKI parts list it appears for LH series machines.\u003c\/p\u003e\n\u003cp\u003eThe needle clamp keeps the needle in exactly the same position stroke after stroke. A worn or loose clamp lets the needle shift, which causes skipped stitches and needle breaks.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003eB1402528KALA\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Needle Clamp Assembly 3\/8\u003c\/li\u003e\n\u003cli\u003eType: Needle Clamps\u003c\/li\u003e\n\u003cli\u003eSize mark in the JUKI name: 3\/8\u003c\/li\u003e\n\u003cli\u003eListed in 8 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart B1402528KALA is used on these JUKI machines: LH-4500C; LH-3500A Series; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7(for China); LH-3168-7\/LH-3168; LH-3162-4\/LH-3162-7; LH-3188\/LH-3188-7; LH-3182-4\/LH-3182-7.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe needle slips, turns or sits crooked\u003c\/li\u003e\n\u003cli\u003eSkipped stitches or frequent needle breaks\u003c\/li\u003e\n\u003cli\u003eThe clamp screw or seat is worn or damaged\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSkipped stitches and thread breaks have many causes. Before you replace a part, check that the needle is new, the right size and system and fully inserted, and check the threading and the tension.\u003c\/p\u003e\n\u003cp\u003eInsert the needle fully and with the correct orientation before tightening the clamp screw. Switch the machine off and unplug it before you start, and turn the handwheel by hand through a full stitch before the first run.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eNeedle clamps differ by machine and are often made for the left or right needle. On twin-needle machines a size such as 3\/8 or 5\/8 in the name is the needle gauge, the distance between the two needles, and the clamps, throat plate, feed dog and presser foot must all be for the same gauge.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22638456-presser-foot-assembly\"\u003eJUKI 22638456 Presser Foot Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22641252-presser-foot-assembly\"\u003eJUKI 22641252 Presser Foot Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22827257-bobbin-case-assembly\"\u003eJUKI 22827257 Bobbin Case Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22625800-throat-plate-3-8-9-5-mm\"\u003eJUKI 22625800 Throat Plate 3\/8 (9.5 mm)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22626006-throat-plate-1-2-12-7-mm\"\u003eJUKI 22626006 Throat Plate 1\/2 (12.7 mm)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679755538597,"sku":"JUK-B1402528KALA","price":77.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/needle_clamp_v2.png?v=1792234173"}],"url":"https:\/\/prizzisewing.com\/es\/collections\/juki-lh-3528-spare-parts.oembed?page=2","provider":"PRIZZI SEWING MACHINE CO.","version":"1.0","type":"link"}