{"title":"JUKI Presser Feet \u0026 Parts","description":"\u003cp\u003eJUKI presser feet, presser bars, lifters and other presser parts. Order by the JUKI part number.\u003c\/p\u003e","products":[{"product_id":"juki-22907554-presser-spring-regulator-nut-assembly","title":"Conjunto de tuerca reguladora del resorte del prensatelas JUKI 22907554","description":"\u003ch2\u003eJUKI 22907554 Presser Spring Regulator Nut Assembly\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 22907554: Presser Spring Regulator Nut Assembly. This is the adjusting nut assembly of the presser spring. Our service team lists it for JUKI DDL-8700, DDL-8700H, DDL-8700-7, DDL-8700H-7 and DDL-8000A series.\u003c\/p\u003e\n\u003cp\u003eTurning it sets how hard the presser foot presses on the fabric, so the fabric feeds evenly without marks.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e22907554\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name: Presser Spring Regulator Nut Assembly\u003c\/li\u003e\n\u003cli\u003eType: Presser Parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 22907554 is used on: JUKI DDL-8700, DDL-8700H, DDL-8700-7, DDL-8700H-7 and DDL-8000A series.\u003c\/p\u003e\n\u003cp\u003eThe list comes from our service team's parts matrix. Machine names are written the way JUKI writes them.\u003c\/p\u003e\n\u003ch3\u003eBefore you install it\u003c\/h3\u003e\n\u003cp\u003eInstall the part with its original pins, screws and washers, oil the pivots as your machine's manual instructs, and recheck the related adjustment. Switch the machine off and unplug it before you start, and turn the handwheel by hand through a full stitch before the first run.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eThese parts are specific to the machine and often to a left or right position.\u003c\/p\u003e\n\u003ch3\u003eOther wear parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-11038759-bobbin-case-assembly\"\u003eJUKI 11038759 Bobbin Case Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22932909-bobbin\"\u003eJUKI 22932909 Bobbin\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22921605-thread-take-up-spring\"\u003eJUKI 22921605 Thread Take-Up Spring\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-ss7091110tp-screw-9-64-40-l-10-5\"\u003eJUKI SS7091110TP Screw 9\/64-40 L=10.5\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-ss7080510tp-screw-1-8-44-l-4-5\"\u003eJUKI SS7080510TP Screw 1\/8-44 L=4.5\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":47526906822821,"sku":"JUK-22907554","price":2.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/1600_1600_d937621e-e41e-4094-8ce4-7ce97934ae77.jpg?v=1773050143"},{"product_id":"juki-b1524041eb0-presser-foot-assembly","title":"JUKI B1524041EB0 Presser Foot Assembly","description":"\u003ch2\u003eJUKI B1524041EB0 Presser Foot Assembly\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part B1524041EB0: Presser Foot Assembly for JUKI industrial sewing machines.\u003c\/p\u003e\n\u003cp\u003ePresser parts hold the fabric against the feed dog while the needle works.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003eB1524041EB0\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Presser Foot Asm.\u003c\/li\u003e\n\u003cli\u003eListed in 7 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart B1524041EB0 is used on these JUKI machines: DDL-5530N Series; DLN-9010; DLN-5410N-7\/DLN-5410NH-7\/DLN-5410NJ-7; DLN-5410 Series; DLN-5410N Series; DLN-9010A; DLN-5410NDD-7.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-sd0500095th-hinge-screw-d-5-h-0-85\"\u003eJUKI SD0500095TH Hinge Screw D= 5 H= 0.85\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-23624257-thread-take-up-picker-assembly\"\u003eJUKI 23624257 Thread Take-up Picker Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22901250-slide-plate-assembly\"\u003eJUKI 22901250 Slide Plate Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-ss8660610tp-screw-1-4-40-l-6\"\u003eJUKI SS8660610TP Screw 1\/4-40 L=6\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-11024700-gasket\"\u003eJUKI 11024700 Gasket\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the Presser Foot Assembly do?\u003c\/strong\u003e\u003cbr\u003ePresser parts hold the fabric against the feed dog while the needle works.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50580412530853,"sku":"JUK-B1524041EB0","price":26.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/presser_foot_v2.png?v=1792259085"},{"product_id":"juki-22907703-presser-guide-bar","title":"JUKI 22907703 Presser Guide Bar","description":"\u003ch2\u003eJUKI 22907703 Presser Guide Bar\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 22907703: Presser Guide Bar for JUKI industrial sewing machines. It replaces the earlier JUKI part number B1510227000.\u003c\/p\u003e\n\u003cp\u003ePresser parts hold the fabric against the feed dog while the needle works.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e22907703\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Presser Guide Bar\u003c\/li\u003e\n\u003cli\u003eReplaces the earlier part number B1510227000\u003c\/li\u003e\n\u003cli\u003eListed in 70 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 22907703 is used on these JUKI machines: DDL-5530N Series; DDL-5550N Series; DDL-8500; DDL-8500-7; DDL-8300; DDL-8700 Series; DDL-8700-7; DDL-7000A-7; DDL-8000AS,AB; DDL-900B; DDL-900BB; DDL-5570N\/DDL-5580N Series; DLD-5430N\/DLD-5430N-7; DLN-5410N-7\/DLN-5410NH-7\/DLN-5410NJ-7; DLN-5410 Series; DLN-5410N Series; DDL-5571N\/DDL-5581N; DDL-5550N-7 Series; DDL-8000AP; DDL-5556N-7-WB; DMN-5420N-7; DLM-5400N-7 Series; DLM-5200N; DDL-8100e; DDL-8100B-7\/DDL-8100B-7R; DDL-8700B-7; DDL-8700A-7; DDL-900A; DLN-6390\/DLN-6390-7; DLM-5400NDD-7; DMN-5420NDD-7; DLN-5410NDD-7; LH-3128-7\/LH-3128; LH-3500A Series; LH-1152; LH-1152-4\/LH-1152-5\/LH-1152-6,LH-1152-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3168-7\/LH-3168; LH-3162-4\/LH-3162-7; LH-3178\/LH-3178-7; LH-3188\/LH-3188-7; LH-3182-4\/LH-3182-7; LH-3120; LH-3126F; LZ-2280B; LZ-2280A\/LZ-2280A-7 Series; LZ-2280N\/LZ-2280N-7\/LZ-2282N\/LZ-2282N-7\/LZ-2282NU-7\/LZ-2286NU-7\/LZ-2288NU-7; LZ-2290C; LZ-2280 Series; LZ-2280N\/LZ-2280N-7 Series; LZ-2290\/LZ-2290-7; LZ-2290A\/LZ-2290A-7\/LZ-2290A-SR-7; MH-380\/MH-382; MH-484\/S060_S061; MH-481; MH-481-4 Series\/MH-481-5 Series; MH-484-4\u0026amp;S060_PF-5\/MH-484-5\u0026amp;S060_PF-5; MP-200N; ML-111; AMS-205C\/206C; AMS-215C\/AMS-215P; AMS-220C; AMS-220C\/AMS-220P; DU-1181N; DU-1181N-7; DDL-5600NL-7\/DDL-5600NU-7\/DDL-5600NJ-7\/DDL-5600NR-7; DDL-5600NL\/DDL-5600NU\/DDL-5600NJ\/DDL-5600NR; DU-141H-7; DU-580; DU-141NH.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22907406-presser-spring\"\u003eJUKI 22907406 Presser Spring\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22931703-knee-lifter-push-rod\"\u003eJUKI 22931703 Knee Lifter Push Rod\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-ss2110920tp-screw-11-64-40-l-8-5\"\u003eJUKI SS2110920TP Screw 11\/64-40 L=8.5\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-ss8660610tp-screw-1-4-40-l-6\"\u003eJUKI SS8660610TP Screw 1\/4-40 L=6\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22923056-oil-pump-assembly\"\u003eJUKI 22923056 Oil Pump Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the Presser Guide Bar do?\u003c\/strong\u003e\u003cbr\u003ePresser parts hold the fabric against the feed dog while the needle works.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eI have the old number B1510227000. Is this the right part?\u003c\/strong\u003e\u003cbr\u003eYes. JUKI lists 22907703 as the replacement for B1510227000.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50580446707877,"sku":"JUK-22907703","price":1.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/presser_foot_v2.png?v=1792259085"},{"product_id":"juki-22907802-hand-lifter","title":"JUKI 22907802 Hand Lifter","description":"\u003ch2\u003eJUKI 22907802 Hand Lifter\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 22907802: Hand Lifter. This is a part of the presser foot mechanism. In the official JUKI parts list it appears for DDL, DLN, DLD and other series machines. It replaces the earlier JUKI part number 11071800.\u003c\/p\u003e\n\u003cp\u003eThe presser bar, its cap and the lifters press the foot onto the fabric and raise it. Wear in these parts changes the pressure and the lift, and the fabric is no longer held evenly. The lifter raises the presser foot so that fabric can be placed or removed.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e22907802\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Hand Lifter\u003c\/li\u003e\n\u003cli\u003eType: Presser Parts\u003c\/li\u003e\n\u003cli\u003eReplaces the earlier part number 11071800\u003c\/li\u003e\n\u003cli\u003eListed in 88 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 22907802 is used on these JUKI machines: DDL-5530N Series; DDL-5550N Series; DDL-8500; DDL-8500-7; DDL-8300; DDL-8700 Series; DDL-8700-7; DDL-7000A-7; DDL-8000AS,AB; DDL-900B; DDL-900BB; DDL-9000B\/X73199; DDL-9000C-S; DLN-9010; DDL-5570N\/DDL-5580N Series; DLD-5430N\/DLD-5430N-7; DLN-5410N-7\/DLN-5410NH-7\/DLN-5410NJ-7; DLN-5410N Series; DLU-5490N-7 Series; DLU-5494N-7; DLU-5490N Series; DDL-5571N\/DDL-5581N; DDL-5550N-7 Series; DDL-9000A; DDL-8000AP; DDL-9000A\/PBN; DDL-5556N-7-WB; DDL-9000B; DMN-5420N-7; DLM-5400N-7 Series; DLM-5200N; DDL-8100e; DDL-8100B-7\/DDL-8100B-7R; DDL-8700B-7; DDL-8700A-7; DDL-900A; DDL-9000; DLN-6390\/DLN-6390-7; DLN-9010A; DLM-5400NDD-7; DMN-5420NDD-7; DLN-5410NDD-7; LH-3128-7\/LH-3128; LH-3500A Series; LH-1152; LH-1152-4\/LH-1152-5\/LH-1152-6,LH-1152-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7(for China); LH-3168-7\/LH-3168; LH-3162-4\/LH-3162-7; LH-3178\/LH-3178-7; LH-3188\/LH-3188-7; LH-3182-4\/LH-3182-7; LH-3120; LH-3126F; LH-4128\/LH-4128-7\/LH-4168-7\/LH-4188-7; LZ-2280B; LZ-2280A\/LZ-2280A-7 Series (For China); LZ-2280N\/LZ-2280N-7\/LZ-2282N\/LZ-2282N-7\/LZ-2282NU-7\/LZ-2286NU-7\/LZ-2288NU-7; LZ-2290C; LZ-2280 Series; LZ-2280N\/LZ-2280N-7 Series; LZ-2280A\/LZ-2280A-7 Series; LZ-2290\/LZ-2290-7; LZ-2290A\/LZ-2290A-7\/LZ-2290A-SR-7; MH-380\/MH-382; MH-484\/S060_S061; MH-481; MH-481-4 Series\/MH-481-5 Series; MH-484-4\u0026amp;S060_PF-5\/MH-484-5\u0026amp;S060_PF-5; MP-200N; ML-111; MOL-254N; MOL-254; AE-200AN; AE-200A; DU-1181N; DU-1181N-7; LZH-1290 Series; DDL-5600NL-7\/DDL-5600NU-7\/DDL-5600NJ-7\/DDL-5600NR-7; DDL-5600NL\/DDL-5600NU\/DDL-5600NJ\/DDL-5600NR; LU-2220N-7; LU-2212N-7\/2210N-6,-7\/2210W-6,-7\/2260N-7\/2260W-6,-7; LU-2216N-7\/LU-2266N-7; PLC-1690\/PLC-1691; PLC-1660\/PLC-1660-7\/PLC-1660L; PLC-1665; PLC-1610\/PLC-1610-7.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe foot does not press evenly or does not lift properly\u003c\/li\u003e\n\u003cli\u003ePlay, noise or a bent presser bar\u003c\/li\u003e\n\u003cli\u003eA lifter or stopper that no longer holds its position\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAfter installing, check the presser foot height, pressure and lift as described in the JUKI Engineer's Manual for your model. Switch the machine off and unplug it before you start, and turn the handwheel by hand through a full stitch before the first run.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003ePresser parts are specific to the machine.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22907406-presser-spring\"\u003eJUKI 22907406 Presser Spring\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-ss8660610tp-screw-1-4-40-l-6\"\u003eJUKI SS8660610TP Screw 1\/4-40 L=6\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-ro098240100-o-ring\"\u003eJUKI RO098240100 O-Ring\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-ss8681650tp-screw-9-32-28-l-16\"\u003eJUKI SS8681650TP Screw 9\/32-28 L=16\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-wp0501016sd-washer-5x10-5x1\"\u003eJUKI WP0501016SD Washer 5X10.5X1\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eI have the old number 11071800. Is this the right part?\u003c\/strong\u003e\u003cbr\u003eYes. JUKI lists 22907802 as the replacement for 11071800.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679066755237,"sku":"JUK-22907802","price":1.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/presser_foot_v2.png?v=1792259085"},{"product_id":"juki-40017805-presser-bar","title":"JUKI 40017805 Presser Bar","description":"\u003ch2\u003eJUKI 40017805 Presser Bar\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 40017805: Presser Bar. This is a part of the presser foot mechanism. In the official JUKI parts list it appears for DDL, DLD, DLN and other series machines. It replaces the earlier JUKI part number 22907000.\u003c\/p\u003e\n\u003cp\u003eThe presser bar, its cap and the lifters press the foot onto the fabric and raise it. Wear in these parts changes the pressure and the lift, and the fabric is no longer held evenly. The presser bar carries the presser foot and transmits the spring pressure to it.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e40017805\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Presser Bar\u003c\/li\u003e\n\u003cli\u003eType: Presser Parts\u003c\/li\u003e\n\u003cli\u003eReplaces the earlier part number 22907000\u003c\/li\u003e\n\u003cli\u003eListed in 34 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 40017805 is used on these JUKI machines: DDL-5530N Series; DDL-5550N Series; DDL-8500; DDL-8500-7; DDL-8300; DDL-8700 Series; DDL-8700-7; DDL-7000A-7; DDL-8000AS,AB; DDL-900B; DDL-900BB; DLD-5430N\/DLD-5430N-7; DLN-5410N-7\/DLN-5410NH-7\/DLN-5410NJ-7; DLN-5410N Series; DDL-5571N\/DDL-5581N; DDL-5550N-7 Series; DDL-8000AP; DDL-5556N-7-WB; DDL-8100e; DDL-8100B-7\/DDL-8100B-7R; DDL-8700B-7; DDL-8700A-7; DDL-900A; DLN-5410NDD-7; MH-484\/S060_S061; MH-481; MH-481-4 Series\/MH-481-5 Series; MH-484-4\u0026amp;S060_PF-5\/MH-484-5\u0026amp;S060_PF-5; MP-200N; DU-1181N; DU-1181N-7; DDL-5600NL-7\/DDL-5600NU-7\/DDL-5600NJ-7\/DDL-5600NR-7; DDL-5600NL\/DDL-5600NU\/DDL-5600NJ\/DDL-5600NR; DU-141H-7.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe foot does not press evenly or does not lift properly\u003c\/li\u003e\n\u003cli\u003ePlay, noise or a bent presser bar\u003c\/li\u003e\n\u003cli\u003eA lifter or stopper that no longer holds its position\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAfter installing, check the presser foot height, pressure and lift as described in the JUKI Engineer's Manual for your model. Switch the machine off and unplug it before you start, and turn the handwheel by hand through a full stitch before the first run.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003ePresser parts are specific to the machine.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22920300-thread-release-supporting-pin\"\u003eJUKI 22920300 Thread Release Supporting Pin\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22901003-bed-screw-stud\"\u003eJUKI 22901003 Bed Screw Stud\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22923205-pump-body-cover\"\u003eJUKI 22923205 Pump Body Cover\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22923056-oil-pump-assembly\"\u003eJUKI 22923056 Oil Pump Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22901250-slide-plate-assembly\"\u003eJUKI 22901250 Slide Plate Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eI have the old number 22907000. Is this the right part?\u003c\/strong\u003e\u003cbr\u003eYes. JUKI lists 40017805 as the replacement for 22907000.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679076847781,"sku":"JUK-40017805","price":7.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/presser_foot_v2.png?v=1792259085"},{"product_id":"juki-22863252-knee-lifter-joint-assembly","title":"JUKI 22863252 Knee Lifter Joint Assembly","description":"\u003ch2\u003eJUKI 22863252 Knee Lifter Joint Assembly\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 22863252: Knee Lifter Joint Assembly. This is a part of the presser foot mechanism. In the official JUKI parts list it appears for DNU, LU, DSU and other series machines.\u003c\/p\u003e\n\u003cp\u003eThe presser bar, its cap and the lifters press the foot onto the fabric and raise it. Wear in these parts changes the pressure and the lift, and the fabric is no longer held evenly. The lifter raises the presser foot so that fabric can be placed or removed.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e22863252\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Knee Lifter Joint Assembly\u003c\/li\u003e\n\u003cli\u003eType: Presser Parts\u003c\/li\u003e\n\u003cli\u003eListed in 15 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 22863252 is used on these JUKI machines: DNU-1541\/DNU-1541H\/DNU-1541S; LU-1560N\/LU-1560N-7; LU-1565N; LU-1508N\/LU-1508NH; LU-1561N\/LU-1561N-7; LU-1509N\/LU-1509NH\/LU-1511N-7; LU-1510N; LU-1508\/LU-1508H; LU-1510,1510-7; LU-1560\/LU-1560-7; DNU-1541-7; DSU-144N; PLC-2700 Series; PLC-1690\/PLC-1691; PLC-1710\/PLC-1760\/PLC-1760L.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe foot does not press evenly or does not lift properly\u003c\/li\u003e\n\u003cli\u003ePlay, noise or a bent presser bar\u003c\/li\u003e\n\u003cli\u003eA lifter or stopper that no longer holds its position\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAfter installing, check the presser foot height, pressure and lift as described in the JUKI Engineer's Manual for your model. Switch the machine off and unplug it before you start, and turn the handwheel by hand through a full stitch before the first run.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003ePresser parts are specific to the machine.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-21336805-feed-dial-a\"\u003eJUKI 21336805 Feed Dial A\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-21351150-belt-cover-assembly-right\"\u003eJUKI 21351150 Belt Cover Assembly (Right)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-21351200-belt-cover-left\"\u003eJUKI 21351200 Belt Cover (Left)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-21355755-lower-thread-guide-assembly\"\u003eJUKI 21355755 Lower Thread Guide Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-sm3031401se-screw-m3x0-5-l-14\"\u003eJUKI SM3031401SE Screw M3X0.5 L=14\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679080222885,"sku":"JUK-22863252","price":38.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/presser_foot_v2.png?v=1792259085"},{"product_id":"juki-40228067-presser-bar","title":"JUKI 40228067 Presser Bar","description":"\u003ch2\u003eJUKI 40228067 Presser Bar\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 40228067: Presser Bar. This is a part of the presser foot mechanism. In the official JUKI parts list it appears for PS and SR series machines.\u003c\/p\u003e\n\u003cp\u003eThe presser bar, its cap and the lifters press the foot onto the fabric and raise it. Wear in these parts changes the pressure and the lift, and the fabric is no longer held evenly. The presser bar carries the presser foot and transmits the spring pressure to it.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e40228067\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Presser Bar\u003c\/li\u003e\n\u003cli\u003eType: Presser Parts\u003c\/li\u003e\n\u003cli\u003eListed in 12 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 40228067 is used on these JUKI machines: PS-800-8045; PS-800-12080; PS-800-13085; PS-900-13090; PS-910-13090; PS-810-8045_10045; PS-810-13085; PS-800-6045; PS-910-6055; PS-800-3830; SR-9950-13090; SR-9950-6055.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe foot does not press evenly or does not lift properly\u003c\/li\u003e\n\u003cli\u003ePlay, noise or a bent presser bar\u003c\/li\u003e\n\u003cli\u003eA lifter or stopper that no longer holds its position\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAfter installing, check the presser foot height, pressure and lift as described in the JUKI Engineer's Manual for your model. Switch the machine off and unplug it before you start, and turn the handwheel by hand through a full stitch before the first run.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003ePresser parts are specific to the machine.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40228066-press-bushing\"\u003eJUKI 40228066 Press Bushing\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40228084-press-dust-case\"\u003eJUKI 40228084 Press Dust Case\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40228077-intermediate-presser-d-3-0\"\u003eJUKI 40228077 Intermediate Presser D=3.0\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40228609-screw\"\u003eJUKI 40228609 Screw\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679088644261,"sku":"JUK-40228067","price":15.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/presser_foot_v2.png?v=1792259085"},{"product_id":"juki-a15016440c0a-presser-foot-master-assembly","title":"JUKI A15016440C0A Presser Foot Master Assembly","description":"\u003ch2\u003eJUKI A15016440C0A Presser Foot Master Assembly\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part A15016440C0A: Presser Foot Master Assembly. This is the foot that holds the fabric against the feed dog while the needle works.\u003c\/p\u003e\n\u003cp\u003eThe presser foot pressure and the shape of its sole determine how the fabric is held and fed. A worn, bent or marked sole feeds unevenly and can mark delicate fabric.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003eA15016440C0A\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Presser Foot Master Assembly\u003c\/li\u003e\n\u003cli\u003eType: Presser Feet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eJUKI lists this part under the number above, but we do not show a list of machines for it yet.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFabric feeds unevenly or shifts under the foot\u003c\/li\u003e\n\u003cli\u003eThe sole is worn, bent or has burrs\u003c\/li\u003e\n\u003cli\u003eMarks or pull on the fabric along the seam\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAfter installing, check the foot against the throat plate and the needle hole and adjust the presser pressure as the JUKI Engineer's Manual for your model describes. Switch the machine off and unplug it before you start, and turn the handwheel by hand through a full stitch before the first run.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003ePresser feet differ by machine, stitch type and fabric, and many are made in left, right and size versions. On twin-needle machines a size such as 3\/8 or 5\/8 in the name is the needle gauge and must match the throat plate and the feed dog.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679090315429,"sku":"JUK-A15016440C0A","price":50.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/presser_foot_v2.png?v=1792259085"},{"product_id":"juki-21343157-knee-press-plate-assembly","title":"JUKI 21343157 Knee Press Plate Assembly","description":"\u003ch2\u003eJUKI 21343157 Knee Press Plate Assembly\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 21343157: Knee Press Plate Assembly. This is a part of the presser foot mechanism. In the official JUKI parts list it appears for DNU, LU and PLC series machines.\u003c\/p\u003e\n\u003cp\u003eThe presser bar, its cap and the lifters press the foot onto the fabric and raise it. Wear in these parts changes the pressure and the lift, and the fabric is no longer held evenly.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e21343157\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Knee Press Plate Assembly\u003c\/li\u003e\n\u003cli\u003eType: Presser Parts\u003c\/li\u003e\n\u003cli\u003eListed in 14 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 21343157 is used on these JUKI machines: DNU-1541\/DNU-1541H\/DNU-1541S; LU-2800 Series; LU-1560N\/LU-1560N-7; LU-1565N; LU-1508N\/LU-1508NH; LU-1561N\/LU-1561N-7; LU-1509N\/LU-1509NH\/LU-1511N-7; LU-1510N; LU-1508\/LU-1508H; LU-1510,1510-7; LU-1560\/LU-1560-7; DNU-1541-7; PLC-2700 Series; PLC-1710\/PLC-1760\/PLC-1760L.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe foot does not press evenly or does not lift properly\u003c\/li\u003e\n\u003cli\u003ePlay, noise or a bent presser bar\u003c\/li\u003e\n\u003cli\u003eA lifter or stopper that no longer holds its position\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAfter installing, check the presser foot height, pressure and lift as described in the JUKI Engineer's Manual for your model. Switch the machine off and unplug it before you start, and turn the handwheel by hand through a full stitch before the first run.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003ePresser parts are specific to the machine.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-21336805-feed-dial-a\"\u003eJUKI 21336805 Feed Dial A\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-21351150-belt-cover-assembly-right\"\u003eJUKI 21351150 Belt Cover Assembly (Right)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-21351200-belt-cover-left\"\u003eJUKI 21351200 Belt Cover (Left)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-21355755-lower-thread-guide-assembly\"\u003eJUKI 21355755 Lower Thread Guide Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-21351457-oil-reservoir-assembly\"\u003eJUKI 21351457 Oil Reservoir Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679214899365,"sku":"JUK-21343157","price":21.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/presser_foot_v2.png?v=1792259085"},{"product_id":"juki-b1511850000-presser-bar-cap","title":"JUKI B1511850000 Presser Bar Cap","description":"\u003ch2\u003eJUKI B1511850000 Presser Bar Cap\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part B1511850000: Presser Bar Cap. This is a part of the presser foot mechanism.\u003c\/p\u003e\n\u003cp\u003eThe presser bar, its cap and the lifters press the foot onto the fabric and raise it. Wear in these parts changes the pressure and the lift, and the fabric is no longer held evenly. The presser bar carries the presser foot and transmits the spring pressure to it.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003eB1511850000\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Presser Bar Cap\u003c\/li\u003e\n\u003cli\u003eType: Presser Parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eJUKI lists this part under the number above, but we do not show a list of machines for it yet.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe foot does not press evenly or does not lift properly\u003c\/li\u003e\n\u003cli\u003ePlay, noise or a bent presser bar\u003c\/li\u003e\n\u003cli\u003eA lifter or stopper that no longer holds its position\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAfter installing, check the presser foot height, pressure and lift as described in the JUKI Engineer's Manual for your model. Switch the machine off and unplug it before you start, and turn the handwheel by hand through a full stitch before the first run.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003ePresser parts are specific to the machine.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679623352485,"sku":"JUK-B1511850000","price":1.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/presser_foot_v2.png?v=1792259085"},{"product_id":"juki-d1524415bbc-presser-foot-assembly","title":"JUKI D1524415BBC Presser Foot Assembly","description":"\u003ch2\u003eJUKI D1524415BBC Presser Foot Assembly\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part D1524415BBC: Presser Foot Assembly. This is the foot that holds the fabric against the feed dog while the needle works. In the official JUKI parts list it appears for DLN series machines. It replaces the earlier JUKI part number D1524415BBA.\u003c\/p\u003e\n\u003cp\u003eThe presser foot pressure and the shape of its sole determine how the fabric is held and fed. A worn, bent or marked sole feeds unevenly and can mark delicate fabric.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003eD1524415BBC\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Presser Foot Assembly\u003c\/li\u003e\n\u003cli\u003eType: Presser Feet\u003c\/li\u003e\n\u003cli\u003eReplaces the earlier part number D1524415BBA\u003c\/li\u003e\n\u003cli\u003eListed in 6 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart D1524415BBC is used on these JUKI machines: DLN-9010; DLN-5410N-7\/DLN-5410NH-7\/DLN-5410NJ-7; DLN-5410 Series; DLN-5410N Series; DLN-9010A; DLN-5410NDD-7.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFabric feeds unevenly or shifts under the foot\u003c\/li\u003e\n\u003cli\u003eThe sole is worn, bent or has burrs\u003c\/li\u003e\n\u003cli\u003eMarks or pull on the fabric along the seam\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAfter installing, check the foot against the throat plate and the needle hole and adjust the presser pressure as the JUKI Engineer's Manual for your model describes. Switch the machine off and unplug it before you start, and turn the handwheel by hand through a full stitch before the first run.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003ePresser feet differ by machine, stitch type and fabric, and many are made in left, right and size versions. On twin-needle machines a size such as 3\/8 or 5\/8 in the name is the needle gauge and must match the throat plate and the feed dog.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-11321452-lubricating-hook-assembly\"\u003eJUKI 11321452 Lubricating Hook Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-11322203-feed-dog\"\u003eJUKI 11322203 Feed Dog\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-b1109415h0b-throat-plate-h\"\u003eJUKI B1109415H0B Throat Plate (H)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-11326303-feed-dial\"\u003eJUKI 11326303 Feed Dial\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-11303567-needle-rod-rocking-base-assembly\"\u003eJUKI 11303567 Needle Rod Rocking Base Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eI have the old number D1524415BBA. Is this the right part?\u003c\/strong\u003e\u003cbr\u003eYes. JUKI lists D1524415BBC as the replacement for D1524415BBA.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679644520613,"sku":"JUK-D1524415BBC","price":26.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/presser_foot_v2.png?v=1792259085"},{"product_id":"juki-13116009-presser-arm-stopper","title":"JUKI 13116009 Presser Arm Stopper","description":"\u003ch2\u003eJUKI 13116009 Presser Arm Stopper\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 13116009: Presser Arm Stopper. This is a part of the presser foot mechanism. In the official JUKI parts list it appears for MO, MOC and MOG series machines. It replaces the earlier JUKI part number 12115200.\u003c\/p\u003e\n\u003cp\u003eThe presser bar, its cap and the lifters press the foot onto the fabric and raise it. Wear in these parts changes the pressure and the lift, and the fabric is no longer held evenly.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e13116009\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Presser Arm Stopper\u003c\/li\u003e\n\u003cli\u003eType: Presser Parts\u003c\/li\u003e\n\u003cli\u003eReplaces the earlier part number 12115200\u003c\/li\u003e\n\u003cli\u003eListed in 12 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 13116009 is used on these JUKI machines: MO-6700DA-0E4\/MO-6714DA-BE6\/MO-6716DA-DE4; MO-6700D; MO-3900\/MO-3904\/MO-3914\/MO-3916; MOC-3904\/MOC-3914; MO-3704E\/MO-3714E\/MO-3716E; MOG-3700; MO-6700S-0E4\/MO-6714S-BE\/MO-6716S-DE4; MO-6904S-0E4\/MO-6914S-BE6\/MO-6916S-DE; MO-6700S Series; MO-6100D; MO-6904C-0E6\/MO-6914C-BE6; MO-6904G-0F6\/MO-6914G-CH6\/MO-6916G-FH6.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe foot does not press evenly or does not lift properly\u003c\/li\u003e\n\u003cli\u003ePlay, noise or a bent presser bar\u003c\/li\u003e\n\u003cli\u003eA lifter or stopper that no longer holds its position\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAfter installing, check the presser foot height, pressure and lift as described in the JUKI Engineer's Manual for your model. Switch the machine off and unplug it before you start, and turn the handwheel by hand through a full stitch before the first run.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003ePresser parts are specific to the machine.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-13102900-large-thread-guide\"\u003eJUKI 13102900 Large Thread Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-13143300-oil-gauge\"\u003eJUKI 13143300 Oil Gauge\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-13207550-connecting-rod-assembly\"\u003eJUKI 13207550 Connecting Rod Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-11565504-upper-knife-presser-plate\"\u003eJUKI 11565504 Upper Knife Presser Plate\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-11565702-washer\"\u003eJUKI 11565702 Washer\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eI have the old number 12115200. Is this the right part?\u003c\/strong\u003e\u003cbr\u003eYes. JUKI lists 13116009 as the replacement for 12115200.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679663034533,"sku":"JUK-13116009","price":4.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/presser_foot_v2.png?v=1792259085"},{"product_id":"juki-22638456-presser-foot-assembly","title":"JUKI 22638456 Presser Foot Assembly","description":"\u003ch2\u003eJUKI 22638456 Presser Foot Assembly\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 22638456: Presser Foot Assembly. This is the foot that holds the fabric against the feed dog while the needle works. In the official JUKI parts list it appears for LH series machines.\u003c\/p\u003e\n\u003cp\u003eThe presser foot pressure and the shape of its sole determine how the fabric is held and fed. A worn, bent or marked sole feeds unevenly and can mark delicate fabric.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e22638456\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Presser Foot Assembly\u003c\/li\u003e\n\u003cli\u003eType: Presser Feet\u003c\/li\u003e\n\u003cli\u003eListed in 7 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 22638456 is used on these JUKI machines: LH-3128-7\/LH-3128; LH-4500C; LH-3500A Series; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7(for China); LH-3168-7\/LH-3168; LH-3162-4\/LH-3162-7.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFabric feeds unevenly or shifts under the foot\u003c\/li\u003e\n\u003cli\u003eThe sole is worn, bent or has burrs\u003c\/li\u003e\n\u003cli\u003eMarks or pull on the fabric along the seam\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAfter installing, check the foot against the throat plate and the needle hole and adjust the presser pressure as the JUKI Engineer's Manual for your model describes. Switch the machine off and unplug it before you start, and turn the handwheel by hand through a full stitch before the first run.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003ePresser feet differ by machine, stitch type and fabric, and many are made in left, right and size versions. On twin-needle machines a size such as 3\/8 or 5\/8 in the name is the needle gauge and must match the throat plate and the feed dog.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-b1402528kala-needle-clamp-assembly-3-8\"\u003eJUKI B1402528KALA Needle Clamp Assembly 3\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-b1402528kara-needle-clamp-assembly-3-8\"\u003eJUKI B1402528KARA Needle Clamp Assembly 3\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-b1613512f0h-feed-dog-1-4\"\u003eJUKI B1613512F0H Feed Dog 1\/4\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-b1613512l0h-feed-dog-1-2\"\u003eJUKI B1613512L0H Feed Dog 1\/2\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22625800-throat-plate-3-8-9-5-mm\"\u003eJUKI 22625800 Throat Plate 3\/8 (9.5 mm)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679672307877,"sku":"JUK-22638456","price":100.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/presser_foot_v2.png?v=1792259085"},{"product_id":"juki-22641252-presser-foot-assembly","title":"JUKI 22641252 Presser Foot Assembly","description":"\u003ch2\u003eJUKI 22641252 Presser Foot Assembly\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 22641252: Presser Foot Assembly. This is the foot that holds the fabric against the feed dog while the needle works. In the official JUKI parts list it appears for LH series machines.\u003c\/p\u003e\n\u003cp\u003eThe presser foot pressure and the shape of its sole determine how the fabric is held and fed. A worn, bent or marked sole feeds unevenly and can mark delicate fabric.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e22641252\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Presser Foot Assembly\u003c\/li\u003e\n\u003cli\u003eType: Presser Feet\u003c\/li\u003e\n\u003cli\u003eListed in 10 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 22641252 is used on these JUKI machines: LH-3128-7\/LH-3128; LH-4500C; LH-3500A Series; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7(for China); LH-3168-7\/LH-3168; LH-3162-4\/LH-3162-7; LH-3178\/LH-3178-7; LH-3188\/LH-3188-7; LH-4128\/LH-4128-7\/LH-4168-7\/LH-4188-7.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFabric feeds unevenly or shifts under the foot\u003c\/li\u003e\n\u003cli\u003eThe sole is worn, bent or has burrs\u003c\/li\u003e\n\u003cli\u003eMarks or pull on the fabric along the seam\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAfter installing, check the foot against the throat plate and the needle hole and adjust the presser pressure as the JUKI Engineer's Manual for your model describes. Switch the machine off and unplug it before you start, and turn the handwheel by hand through a full stitch before the first run.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003ePresser feet differ by machine, stitch type and fabric, and many are made in left, right and size versions. On twin-needle machines a size such as 3\/8 or 5\/8 in the name is the needle gauge and must match the throat plate and the feed dog.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22625800-throat-plate-3-8-9-5-mm\"\u003eJUKI 22625800 Throat Plate 3\/8 (9.5 mm)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22626006-throat-plate-1-2-12-7-mm\"\u003eJUKI 22626006 Throat Plate 1\/2 (12.7 mm)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-b1402528kala-needle-clamp-assembly-3-8\"\u003eJUKI B1402528KALA Needle Clamp Assembly 3\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-b1402528kara-needle-clamp-assembly-3-8\"\u003eJUKI B1402528KARA Needle Clamp Assembly 3\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40035893-feed-dog-type-7g-3-8\"\u003eJUKI 40035893 Feed Dog Type 7G 3\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679672340645,"sku":"JUK-22641252","price":132.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/presser_foot_v2.png?v=1792259085"},{"product_id":"juki-22641351-presser-foot-assembly","title":"JUKI 22641351 Presser Foot Assembly","description":"\u003ch2\u003eJUKI 22641351 Presser Foot Assembly\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 22641351: Presser Foot Assembly. This is the foot that holds the fabric against the feed dog while the needle works. In the official JUKI parts list it appears for LH series machines.\u003c\/p\u003e\n\u003cp\u003eThe presser foot pressure and the shape of its sole determine how the fabric is held and fed. A worn, bent or marked sole feeds unevenly and can mark delicate fabric.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e22641351\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Presser Foot Assembly\u003c\/li\u003e\n\u003cli\u003eType: Presser Feet\u003c\/li\u003e\n\u003cli\u003eListed in 10 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 22641351 is used on these JUKI machines: LH-3128-7\/LH-3128; LH-4500C; LH-3500A Series; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7(for China); LH-3168-7\/LH-3168; LH-3162-4\/LH-3162-7; LH-3178\/LH-3178-7; LH-3188\/LH-3188-7; LH-4128\/LH-4128-7\/LH-4168-7\/LH-4188-7.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFabric feeds unevenly or shifts under the foot\u003c\/li\u003e\n\u003cli\u003eThe sole is worn, bent or has burrs\u003c\/li\u003e\n\u003cli\u003eMarks or pull on the fabric along the seam\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAfter installing, check the foot against the throat plate and the needle hole and adjust the presser pressure as the JUKI Engineer's Manual for your model describes. Switch the machine off and unplug it before you start, and turn the handwheel by hand through a full stitch before the first run.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003ePresser feet differ by machine, stitch type and fabric, and many are made in left, right and size versions. On twin-needle machines a size such as 3\/8 or 5\/8 in the name is the needle gauge and must match the throat plate and the feed dog.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22625800-throat-plate-3-8-9-5-mm\"\u003eJUKI 22625800 Throat Plate 3\/8 (9.5 mm)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22626006-throat-plate-1-2-12-7-mm\"\u003eJUKI 22626006 Throat Plate 1\/2 (12.7 mm)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-b1402528kala-needle-clamp-assembly-3-8\"\u003eJUKI B1402528KALA Needle Clamp Assembly 3\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-b1402528kara-needle-clamp-assembly-3-8\"\u003eJUKI B1402528KARA Needle Clamp Assembly 3\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40035893-feed-dog-type-7g-3-8\"\u003eJUKI 40035893 Feed Dog Type 7G 3\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679672373413,"sku":"JUK-22641351","price":132.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/presser_foot_v2.png?v=1792259085"},{"product_id":"juki-22817050-presser-foot-assembly-d-2-4-3-8","title":"JUKI 22817050 Presser Foot Assembly D=2.4 (3\/8)","description":"\u003ch2\u003eJUKI 22817050 Presser Foot Assembly D=2.4 (3\/8)\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 22817050: Presser Foot Assembly D=2.4 (3\/8). This is the foot that holds the fabric against the feed dog while the needle works. In the official JUKI parts list it appears for LH series machines.\u003c\/p\u003e\n\u003cp\u003eThe presser foot pressure and the shape of its sole determine how the fabric is held and fed. A worn, bent or marked sole feeds unevenly and can mark delicate fabric.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e22817050\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Presser Foot Assembly D=2.4 (3\/8)\u003c\/li\u003e\n\u003cli\u003eType: Presser Feet\u003c\/li\u003e\n\u003cli\u003eSize in the JUKI name: D=2.4\u003c\/li\u003e\n\u003cli\u003eSize mark in the JUKI name: 3\/8\u003c\/li\u003e\n\u003cli\u003eListed in 8 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 22817050 is used on these JUKI machines: LH-4500C; LH-3500A Series; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7; LH-3528\/LH-3528-7\/LH-3568\/LH-3568-7\/LH-3578\/LH-3578-7\/LH-3588\/LH-3588-7(for China); LH-3178\/LH-3178-7; LH-3188\/LH-3188-7; LH-3182-4\/LH-3182-7; LH-4128\/LH-4128-7\/LH-4168-7\/LH-4188-7.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFabric feeds unevenly or shifts under the foot\u003c\/li\u003e\n\u003cli\u003eThe sole is worn, bent or has burrs\u003c\/li\u003e\n\u003cli\u003eMarks or pull on the fabric along the seam\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAfter installing, check the foot against the throat plate and the needle hole and adjust the presser pressure as the JUKI Engineer's Manual for your model describes. Switch the machine off and unplug it before you start, and turn the handwheel by hand through a full stitch before the first run.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003ePresser feet differ by machine, stitch type and fabric, and many are made in left, right and size versions. On twin-needle machines a size such as 3\/8 or 5\/8 in the name is the needle gauge and must match the throat plate and the feed dog.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22827257-bobbin-case-assembly\"\u003eJUKI 22827257 Bobbin Case Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22625800-throat-plate-3-8-9-5-mm\"\u003eJUKI 22625800 Throat Plate 3\/8 (9.5 mm)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22626006-throat-plate-1-2-12-7-mm\"\u003eJUKI 22626006 Throat Plate 1\/2 (12.7 mm)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-10228856-needle-clamp-assembly-left-5-8\"\u003eJUKI 10228856 Needle Clamp Assembly Left 5\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-10228864-needle-clamp-assembly-right-5-8\"\u003eJUKI 10228864 Needle Clamp Assembly Right 5\/8\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679672438949,"sku":"JUK-22817050","price":160.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/presser_foot_v2.png?v=1792259085"},{"product_id":"juki-40142985-knee-lifter-connecting-link","title":"JUKI 40142985 Knee Lifter Connecting Link","description":"\u003ch2\u003eJUKI 40142985 Knee Lifter Connecting Link\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 40142985: Knee Lifter Connecting Link. This is a part of the presser foot mechanism. In the official JUKI parts list it appears for AK series machines.\u003c\/p\u003e\n\u003cp\u003eThe presser bar, its cap and the lifters press the foot onto the fabric and raise it. Wear in these parts changes the pressure and the lift, and the fabric is no longer held evenly. The lifter raises the presser foot so that fabric can be placed or removed.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e40142985\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Knee Lifter Connecting Link\u003c\/li\u003e\n\u003cli\u003eType: Presser Parts\u003c\/li\u003e\n\u003cli\u003eListed in 1 model group of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 40142985 is used on: JUKI AK-141.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe foot does not press evenly or does not lift properly\u003c\/li\u003e\n\u003cli\u003ePlay, noise or a bent presser bar\u003c\/li\u003e\n\u003cli\u003eA lifter or stopper that no longer holds its position\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAfter installing, check the presser foot height, pressure and lift as described in the JUKI Engineer's Manual for your model. Switch the machine off and unplug it before you start, and turn the handwheel by hand through a full stitch before the first run.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003ePresser parts are specific to the machine.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-d2468555b00-rubber-plunger\"\u003eJUKI D2468555B00 Rubber Plunger\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40006323-juki-grease-a-tube\"\u003eJUKI 40006323 JUKI Grease A Tube\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679718772901,"sku":"JUK-40142985","price":19.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/presser_foot_v2.png?v=1792259085"},{"product_id":"juki-40228077-intermediate-presser-d-3-0","title":"JUKI 40228077 Intermediate Presser D=3.0","description":"\u003ch2\u003eJUKI 40228077 Intermediate Presser D=3.0\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 40228077: Intermediate Presser D=3.0. This is the foot that holds the fabric against the feed dog while the needle works. In the official JUKI parts list it appears for PS and SR series machines.\u003c\/p\u003e\n\u003cp\u003eThe presser foot pressure and the shape of its sole determine how the fabric is held and fed. A worn, bent or marked sole feeds unevenly and can mark delicate fabric.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e40228077\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Intermediate Presser D3.0\u003c\/li\u003e\n\u003cli\u003eType: Presser Feet\u003c\/li\u003e\n\u003cli\u003eSize in the JUKI name: D=3.0\u003c\/li\u003e\n\u003cli\u003eListed in 10 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart 40228077 is used on these JUKI machines: PS-800-8045; PS-800-12080; PS-800-13085; PS-900-13090; PS-910-13090; PS-810-8045_10045; PS-810-13085; PS-910-6055; SR-9950-13090; SR-9950-6055.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFabric feeds unevenly or shifts under the foot\u003c\/li\u003e\n\u003cli\u003eThe sole is worn, bent or has burrs\u003c\/li\u003e\n\u003cli\u003eMarks or pull on the fabric along the seam\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAfter installing, check the foot against the throat plate and the needle hole and adjust the presser pressure as the JUKI Engineer's Manual for your model describes. Switch the machine off and unplug it before you start, and turn the handwheel by hand through a full stitch before the first run.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003ePresser feet differ by machine, stitch type and fabric, and many are made in left, right and size versions. On twin-needle machines a size such as 3\/8 or 5\/8 in the name is the needle gauge and must match the throat plate and the feed dog.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40228067-presser-bar\"\u003eJUKI 40228067 Presser Bar\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40228066-press-bushing\"\u003eJUKI 40228066 Press Bushing\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40228084-press-dust-case\"\u003eJUKI 40228084 Press Dust Case\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-40228609-screw\"\u003eJUKI 40228609 Screw\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679730077861,"sku":"JUK-40228077","price":43.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/presser_foot_v2.png?v=1792259085"},{"product_id":"juki-b147924500d-center-presser-foot-3-16","title":"JUKI B147924500D Center Presser Foot 3\/16","description":"\u003ch2\u003eJUKI B147924500D Center Presser Foot 3\/16\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part B147924500D: Center Presser Foot 3\/16. This is the foot that holds the fabric against the feed dog while the needle works. In the official JUKI parts list it appears for LU series machines.\u003c\/p\u003e\n\u003cp\u003eThe presser foot pressure and the shape of its sole determine how the fabric is held and fed. A worn, bent or marked sole feeds unevenly and can mark delicate fabric.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003eB147924500D\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Center Presser Foot 3\/16\u003c\/li\u003e\n\u003cli\u003eType: Presser Feet\u003c\/li\u003e\n\u003cli\u003eSize mark in the JUKI name: 3\/16\u003c\/li\u003e\n\u003cli\u003eListed in 10 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart B147924500D is used on these JUKI machines: LU-2800 Series; LU-2810ES-7,LU-2818ES-7; LU-1520NCS-7; LU-1520N-7\/LU-1521N-7; LU-1508N\/LU-1508NH; LU-1510N-7\/LU-1510NA-7; LU-1510N; LU-562N\/LU-563N; LU-1508\/LU-1508H; LU-1510,1510-7.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFabric feeds unevenly or shifts under the foot\u003c\/li\u003e\n\u003cli\u003eThe sole is worn, bent or has burrs\u003c\/li\u003e\n\u003cli\u003eMarks or pull on the fabric along the seam\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAfter installing, check the foot against the throat plate and the needle hole and adjust the presser pressure as the JUKI Engineer's Manual for your model describes. Switch the machine off and unplug it before you start, and turn the handwheel by hand through a full stitch before the first run.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003ePresser feet differ by machine, stitch type and fabric, and many are made in left, right and size versions. On twin-needle machines a size such as 3\/8 or 5\/8 in the name is the needle gauge and must match the throat plate and the feed dog.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-b1611055000-screw-feed-rock-shaft\"\u003eJUKI B1611055000 Screw Feed Rock Shaft\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-b1840051000-feed-driving-eccentric\"\u003eJUKI B1840051000 Feed Driving Eccentric\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-b1401053000-needle-bar\"\u003eJUKI B1401053000 Needle Bar\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-21349709-sliding-plate-right\"\u003eJUKI 21349709 Sliding Plate (Right)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-b1604051000-feed-bar-slide-fork\"\u003eJUKI B1604051000 Feed Bar Slide Fork\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679758553253,"sku":"JUK-B147924500D","price":58.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/presser_foot_v2.png?v=1792259085"},{"product_id":"juki-b15312450ad-outer-presser-foot-assembly-3116","title":"JUKI B15312450AD Outer Presser Foot Assembly 3116","description":"\u003ch2\u003eJUKI B15312450AD Outer Presser Foot Assembly 3116\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part B15312450AD: Outer Presser Foot Assembly 3116. This is the foot that holds the fabric against the feed dog while the needle works. In the official JUKI parts list it appears for LU series machines. It replaces the earlier JUKI part number B153124500D.\u003c\/p\u003e\n\u003cp\u003eThe presser foot pressure and the shape of its sole determine how the fabric is held and fed. A worn, bent or marked sole feeds unevenly and can mark delicate fabric.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003eB15312450AD\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Outer Presser Foot Assembly 3\/16\u003c\/li\u003e\n\u003cli\u003eType: Presser Feet\u003c\/li\u003e\n\u003cli\u003eReplaces the earlier part number B153124500D\u003c\/li\u003e\n\u003cli\u003eListed in 10 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart B15312450AD is used on these JUKI machines: LU-2800 Series; LU-2810ES-7,LU-2818ES-7; LU-1520NCS-7; LU-1520N-7\/LU-1521N-7; LU-1508N\/LU-1508NH; LU-1510N-7\/LU-1510NA-7; LU-1510N; LU-562N\/LU-563N; LU-1508\/LU-1508H; LU-1510,1510-7.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFabric feeds unevenly or shifts under the foot\u003c\/li\u003e\n\u003cli\u003eThe sole is worn, bent or has burrs\u003c\/li\u003e\n\u003cli\u003eMarks or pull on the fabric along the seam\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAfter installing, check the foot against the throat plate and the needle hole and adjust the presser pressure as the JUKI Engineer's Manual for your model describes. Switch the machine off and unplug it before you start, and turn the handwheel by hand through a full stitch before the first run.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003ePresser feet differ by machine, stitch type and fabric, and many are made in left, right and size versions. On twin-needle machines a size such as 3\/8 or 5\/8 in the name is the needle gauge and must match the throat plate and the feed dog.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-b1611055000-screw-feed-rock-shaft\"\u003eJUKI B1611055000 Screw Feed Rock Shaft\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-b1840051000-feed-driving-eccentric\"\u003eJUKI B1840051000 Feed Driving Eccentric\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-b1401053000-needle-bar\"\u003eJUKI B1401053000 Needle Bar\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-21349709-sliding-plate-right\"\u003eJUKI 21349709 Sliding Plate (Right)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-b1604051000-feed-bar-slide-fork\"\u003eJUKI B1604051000 Feed Bar Slide Fork\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eI have the old number B153124500D. Is this the right part?\u003c\/strong\u003e\u003cbr\u003eYes. JUKI lists B15312450AD as the replacement for B153124500D.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679758586021,"sku":"JUK-B15312450AD","price":203.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/presser_foot_v2.png?v=1792259085"},{"product_id":"juki-b34192010a0-knee-lifter-assembly","title":"JUKI B34192010A0 Knee Lifter Assembly","description":"\u003ch2\u003eJUKI B34192010A0 Knee Lifter Assembly\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part B34192010A0: Knee Lifter Assembly. This is a part of the presser foot mechanism. In the official JUKI parts list it appears for MP and ML series machines.\u003c\/p\u003e\n\u003cp\u003eThe presser bar, its cap and the lifters press the foot onto the fabric and raise it. Wear in these parts changes the pressure and the lift, and the fabric is no longer held evenly. The lifter raises the presser foot so that fabric can be placed or removed.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003eB34192010A0\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Knee Lifter Assembly\u003c\/li\u003e\n\u003cli\u003eType: Presser Parts\u003c\/li\u003e\n\u003cli\u003eListed in 2 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart B34192010A0 is used on: JUKI MP-200N, JUKI ML-111.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe foot does not press evenly or does not lift properly\u003c\/li\u003e\n\u003cli\u003ePlay, noise or a bent presser bar\u003c\/li\u003e\n\u003cli\u003eA lifter or stopper that no longer holds its position\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAfter installing, check the presser foot height, pressure and lift as described in the JUKI Engineer's Manual for your model. Switch the machine off and unplug it before you start, and turn the handwheel by hand through a full stitch before the first run.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003ePresser parts are specific to the machine.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-23138209-spreader-jc1023\"\u003eJUKI 23138209 Spreader (JC1023)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-b1839563000-oil-receiving-cover\"\u003eJUKI B1839563000 Oil Receiving Cover\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-b8206012000-felt-cushion\"\u003eJUKI B8206012000 Felt Cushion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-b8209012000-rubber-cushion\"\u003eJUKI B8209012000 Rubber Cushion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/juki-22958052-rubber-hinge-assembly\"\u003eJUKI 22958052 Rubber Hinge Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679784571045,"sku":"JUK-B34192010A0","price":94.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/presser_foot_v2.png?v=1792259085"},{"product_id":"juki-40023632-intermediate-presser-a","title":"JUKI 40023632 Intermediate Presser A","description":"\u003ch2\u003eJUKI 40023632 Intermediate Presser A\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part 40023632: Intermediate Presser A. This is the foot that holds the fabric against the feed dog while the needle works. JUKI includes it in its parts kit for the JUKI AMS-210, AMS-221 and AMS-224.\u003c\/p\u003e\n\u003cp\u003eThe presser foot pressure and the shape of its sole determine how the fabric is held and fed. A worn, bent or marked sole feeds unevenly and can mark delicate fabric.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003e40023632\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name: Intermediate Presser A\u003c\/li\u003e\n\u003cli\u003eType: Presser Feet\u003c\/li\u003e\n\u003cli\u003eQuantity in the JUKI kit \u003ca href=\"\/es\/products\/spare-parts-kit?variant=45911281434789\"\u003e40181177\u003c\/a\u003e (AMS-210, AMS-221 and AMS-224): 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003eJUKI's parts kit sheets list part 40023632 for: JUKI AMS-210, AMS-221 and AMS-224.\u003c\/p\u003e\n\u003cp\u003eThe machine names are written the way JUKI writes them.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFabric feeds unevenly or shifts under the foot\u003c\/li\u003e\n\u003cli\u003eThe sole is worn, bent or has burrs\u003c\/li\u003e\n\u003cli\u003eMarks or pull on the fabric along the seam\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAfter installing, check the foot against the throat plate and the needle hole and adjust the presser pressure as the JUKI Engineer's Manual for your model describes. Switch the machine off and unplug it before you start, and turn the handwheel by hand through a full stitch before the first run.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003ePresser feet differ by machine, stitch type and fabric, and many are made in left, right and size versions. On twin-needle machines a size such as 3\/8 or 5\/8 in the name is the needle gauge and must match the throat plate and the feed dog.\u003c\/p\u003e\n\u003ch3\u003eIncluded in these JUKI kits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/spare-parts-kit?variant=45911281434789\"\u003eSpare Parts Kit - JUKI AMS-210\/221\/224 (ENH*)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50685071163557,"sku":"JUK-40023632","price":21.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/presser_foot_v2.png?v=1792259085"}],"url":"https:\/\/prizzisewing.com\/es\/collections\/juki-presser-feet-and-parts.oembed","provider":"PRIZZI SEWING MACHINE CO.","version":"1.0","type":"link"}