{"product_id":"juki-b1613012i00-feed-dog-i","title":"JUKI B1613012I00 Feed Dog I","description":"\u003ch2\u003eJUKI B1613012I00 Feed Dog I\u003c\/h2\u003e\n\u003cp\u003eJUKI spare part B1613012I00: Feed Dog I. This is the toothed plate under the throat plate that moves the fabric from stitch to stitch. In the official JUKI parts list it appears for DDL series machines.\u003c\/p\u003e\n\u003cp\u003eWith every stitch the feed dog rises through the slots of the throat plate, grips the fabric against the presser foot, moves it forward by one stitch length and drops below the plate again. Tooth pattern and size decide how well it grips and how evenly the fabric travels.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJUKI part number: \u003cstrong\u003eB1613012I00\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart name in the JUKI catalog: Feed Dog I\u003c\/li\u003e\n\u003cli\u003eType: Feed Dogs\u003c\/li\u003e\n\u003cli\u003eListed in 23 model groups of the official JUKI parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits these JUKI machines\u003c\/h3\u003e\n\u003cp\u003ePart B1613012I00 is used on these JUKI machines: DDL-5530N Series; DDL-5550N Series; DDL-8500; DDL-8500-7; DDL-8700 Series; DDL-8700-7; DDL-900B; DDL-8000C; DDL-900BB; DDL-9000C-S; DDL-9000C-F; DDL-5570N\/DDL-5580N Series; DDL-5571N\/DDL-5581N; DDL-5550N-7 Series; DDL-9000A; DDL-9000A\/PBN; DDL-5556N-7-WB; DDL-9000B; DDL-8100e; DDL-8700B-7; DDL-8700A-7; DDL-900A; DDL-9000.\u003c\/p\u003e\n\u003cp\u003eThe list follows the official JUKI WebPartsList. Machine names are written the way JUKI writes them; one entry can cover several related models.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFabric slips or feeds unevenly and the stitch length varies\u003c\/li\u003e\n\u003cli\u003eThe teeth are flattened, rounded or burred and no longer grip\u003c\/li\u003e\n\u003cli\u003eThe fabric is marked or snagged along the feed path\u003c\/li\u003e\n\u003cli\u003eThe feed dog is bent or touches the throat plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eReplace the feed dog together with the throat plate when both are worn, and set the feed dog height as given in the JUKI Engineer's Manual for your model. Switch the machine off and unplug it before you start, and turn the handwheel by hand through a full stitch before the first run.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right part\u003c\/h3\u003e\n\u003cp\u003eFeed dogs differ by machine model, tooth pattern and size. On twin-needle machines a size such as 3\/8 or 1\/2 in the name is the needle gauge, and it must match your throat plate, needle clamps and presser foot. Where the name carries a type mark such as AA or 7G, keep the same one. Spare parts are supplied to order; contact us for current availability.\u003c\/p\u003e\n\u003ch3\u003eMore JUKI parts for the same machines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/juki-22920300-thread-release-supporting-pin\"\u003eJUKI 22920300 Thread Release Supporting Pin\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/juki-22964001-bobbin-a\"\u003eJUKI 22964001 Bobbin A\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/juki-22940506-feed-dial\"\u003eJUKI 22940506 Feed Dial\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/juki-22920409-thread-release-pin-spring\"\u003eJUKI 22920409 Thread Release Pin Spring\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/juki-re0500000k0-e-ring\"\u003eJUKI RE0500000K0 E-Ring\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWill JUKI B1613012I00 fit my machine?\u003c\/strong\u003e\u003cbr\u003eFind your model in the list above. If it is not there, or your machine is a variant, send us the model and we will check it against the JUKI parts list before you order.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to replace the throat plate as well?\u003c\/strong\u003e\u003cbr\u003eNot always, but a worn feed dog and a worn throat plate usually go together. If the slots in the plate are rough or burred, or the needle hole is damaged, replace both for a clean feed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I order the right part?\u003c\/strong\u003e\u003cbr\u003eOrder by the JUKI part number B1613012I00. Part numbers in the JUKI catalog are exact, so the number identifies the part.\u003c\/p\u003e","brand":"PRIZZI SEWING MACHINE CO.","offers":[{"title":"Default Title","offer_id":50679760781477,"sku":"JUK-B1613012I00","price":10.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/7593\/5397\/files\/feed_dog_v2.png?v=1792234173","url":"https:\/\/prizzisewing.com\/products\/juki-b1613012i00-feed-dog-i","provider":"PRIZZI SEWING MACHINE CO.","version":"1.0","type":"link"}